PM042OX1 Version : 0.1 TECHNICAL MODEL SPECIFICATION NO. : PM042OX1 Customer’s Confirmation Customer By PVI’s Confirmation Confirmed By Prepared By FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com Date: Oct 08, 2004 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PM042OX1 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Pixel Arrangement Display Color and Gray Scale Reference Block Diagram Interface Timing Power On Sequence Optical Characteristics 1 2 3 3 3 4 6 12 12 13 14 15 16 21 21 25 26 26 27 28 - Handling Cautions Reliability Test Indication of Lot Number Label Packing Diagram Revision History The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PM042OX1 1.Application This data sheet applies to a color TFT LCD module, PM042OX1. PM042OX1 module applies to Car Audio, which requires high quality flat panel display. If you must use in severe reliability environment, please don’t extend over PVI’s reliability test conditions. If you use PM042OX1, Prime View advises your systems use PVI’s timing controller IC (PVI-2002A) which will generate proper timing signals to control PM042OX1. 2. Features . Resolution: 320 * RGB * 96 . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Thin and light weight . Display Colors：262,144 colors . Optimum Viewing Direction：6 o’clock . TTL interface . Wide viewing angle 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 4.2 (diagonal) 320×(R, G, B)×96 262,144 103.68(H)×25.10(V) 0.324(H)×0.261(V) Stripe 119.9(W)*38.30(H)*6.6(D) (Typ.) TBD CCFL, 1 tube Anti-glare and Wide View Film Normally white Unit inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PM042OX1 4.Mechanical Drawing of TFT-LCD Module M001-037-01 CN1 CN2 Patrick Lin Patrick Lin 4.2"SW(FRONT VIEW) Outline Drawing : Front View (unit : mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PM042OX1 M001-037-01 30 DETAIL "A" (S: 2/1,2PLS) 1 30 CN2 1 30 CN1 1 Patrick Lin Patrick Lin 4.2"SW(BACK VIEW) Outline Drawing : Rear View (unit : mm) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PM042OX1 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type: ELCO, 6210-30PIN, PIN No 30 pins, pitch=0.5mm CN 1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol DIO1 VSS1 VDD1 CLK VSS1 R/L R0 R1 R2 R3 R4 R5 VSS1 G0 G1 G2 G3 G4 G5 VSS1 B0 B1 B2 B3 B4 B5 LD REV POL DIO2 I/O I/O I I I I I I I I I I I I I I I I I I I I I I I I I I I I I/O Function Horizontal Start Pulse Signal Input or Output Ground Power Supply Horizontal Shift Clock Ground Right / Left selection Red Data (LSB) Red Data Red Data Red Data Red Data Red Data (MSB) Ground Green Data (LSB) Green Data Green Data Green Data Green Data Green Data (MSB) Ground Blue Data (LSB) Blue Data Blue Data Blue Data Blue Data Blue Data (MSB) Load output signal Data invert control Polarity selection Horizontal Start Pulse Signal Input or Output Remark Note 5-1 Note 5-1 Note 5-2 Note 5-3 Note 5-4 Note 5-1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PM042OX1 CN 2 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol VSS2 V1 V2 V3 V4 V5 V6 V7 VSS2 V8 V9 V10 V11 V12 V13 V14 VSS2 VDD2 VCOM XON OE U/D CKV STVU STVD VGG GND VCC GND VEE I/O I I I I I I I I I I I I I I I I I I I I I I I I/O I/O I I I I I Function Ground Gamma Voltage 1 Gamma Voltage 2 Gamma Voltage 3 Gamma Voltage 4 Gamma Voltage 5 Gamma Voltage 6 Gamma Voltage 7 Ground Gamma Voltage 8 Gamma Voltage 9 Gamma Voltage 10 Gamma Voltage 11 Gamma Voltage 12 Gamma Voltage 13 Gamma Voltage 14 Ground Voltage for analog circuit Common Voltage NC Output Enable Up / Down Selection Vertical Shift Clock Vertical Shift Pulse Signal Input or Output Vertical Shift Pulse Signal Input or Output Gate On Voltage Ground Voltage for logic circuit Ground Gate Off Voltage Remark Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-10 Note 5-5 Note 5-6 Note 5-7 Note 5-6 Note 5-6 Note 5-8 Note 5-9 Note 5-1: Select left or right shift R/L 1 0 DIO1 Input Hi-Z DIO2 Hi-Z Input Shift Left to right Right to left Note 5-2: Latch the polarity of outputs and switch the new data to outputs At the rising edge (CLK), latch the “POL” signal to control the polarity of the outputs. Note 5-3: Control whether the Data R0~G5 are inverted or not. (PVI suggests connecting to GND) When “REV=1”, these data will be inverted. EX: “00”→”3F”, “07”→”38”, “15”→”2A” Note 5-4: Polarity selector for dot-inversion control. Available at the rising edge of LD. When POL=1: Even outputs range from V1~V7, and Odd outputs range from V8~V14; When POL=0: Even outputs range from V8~V14, and Odd outputs range from V1~V7. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PM042OX1 Note 5-5: When OE is connected to high “1”, the driver outputs are disabled (Gate output = VEE). Under this condition, the operation of registers will not be affected. Note 5-6: Select up or down shift U/D 1 0 STVU Hi-Z Input STVD Input Hi-Z Shift Down to Up Up to Down Note 5-7: Gate driver shift clock Note 5-8: Gate on voltage, VGG=20V. Note 5-9: Gate off voltage, VEE=-10V. Note 5-10: 1) Relationship between input data and output voltage The figure below shows the relationship between the input data and the output voltage with the polarity. The range of V1~V7 is for positive polarity, and V8~V14 for negative polarity. Please refer to the following pages to get the related resister values and voltage calculation method. Vout VDD2 Gamma correction diagram V1 V2 V3 V4 V5 Positive polarity V6 V7 Vcom V8 V9 V10 V11 V12 Negative polarity V13 V14 Vss2 00H 08H 10H 18H 20H 28H 30H 38H 3FH Input Data Remark: VDD2-0.1≧V1≧V2≧V3≧V4≧V5≧V6≧V7; V8≧V9≧V10≧V11≧V12≧V13≧V14≧ VSS2+0.1V. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PM042OX1 2) Output voltage and input data Output Voltage to Panel V.S. Input Data Data Positive polarity Output Voltage Negative polarity Output Voltage 00H V1 V14 01H V2=V3+(V1-V3) × 58 / 64.4 V13=V14+(V12-V14) × 6.4 / 64.4 02H V3+(V1-V3) × 52 / 64.4 V14+(V12-V14) × 12.4 / 64.4 03H V3+(V1-V3) × 46.4 / 64.4 V14+(V12-V14) × 18 / 64.4 04H V3+(V1-V3) × 41.2 / 64.4 V14+(V12-V14) × 23.2 / 64.4 05H V3+(V1-V3) × 36.4 / 64.4 V14+(V12-V14) × 28 / 64.4 06H V3+(V1-V3) × 32 / 64.4 V14+(V12-V14) × 32.4 / 64.4 07H V3+(V1-V3) × 27.6 / 64.4 V14+(V12-V14) × 36.8 / 64.4 08H V3+(V1-V3) × 23.6 / 64.4 V14+(V12-V14) × 40.8 / 64.4 09H V3+(V1-V3) × 19.6 / 64.4 V14+(V12-V14) × 44.8 / 64.4 0AH V3+(V1-V3) × 16.4 / 64.4 V14+(V12-V14) × 48 / 64.4 0BH V3+(V1-V3) × 13.2 / 64.4 V14+(V12-V14) × 51.2 / 64.4 0CH V3+(V1-V3) × 10.4 / 64.4 V14+(V12-V14) × 54 / 64.4 0DH V3+(V1-V3) × 7.6 / 64.4 V14+(V12-V14) × 56.8 / 64.4 0EH V3+(V1-V3) × 4.8 / 64.4 V14+(V12-V14) × 59.6 / 64.4 0FH V3+(V1-V3) × 2.4 / 64.4 V14+(V12-V14) × 62 / 64.4 10H V3 V12 11H V4+(V3-V4) × 19.6 / 22 V12+(V11-V12) × 2.4 / 22 12H V4+(V3-V4) × 17.6 / 22 V12+(V11-V12) × 4.4 / 22 13H V4+(V3-V4) × 15.6 / 22 V12+(V11-V12) × 6.4 / 22 14H V4+(V3-V4) × 13.6 / 22 V12+(V11-V12) × 8.4 / 22 15H V4+(V3-V4) × 12 / 22 V12+(V11-V12) × 10 / 22 16H V4+(V3-V4) × 10.4 / 22 V12+(V11-V12) × 11.6 / 22 17H V4+(V3-V4) × 8.8 / 22 V12+(V11-V12) × 13.2 / 22 18H V4+(V3-V4) × 7.6 / 22 V12+(V11-V12) × 14.4 / 22 19H V4+(V3-V4) × 6.4 / 22 V12+(V11-V12) × 15.6 / 22 1AH V4+(V3-V4) × 5.2 / 22 V12+(V11-V12) × 16.8 / 22 1BH V4+(V3-V4) × 4 / 22 V12+(V11-V12) × 18 / 22 1CH V4+(V3-V4) × 3.2 / 22 V12+(V11-V12) × 18.8 / 22 1DH V4+(V3-V4) × 2.4 / 22 V12+(V11-V12) × 19.6 / 22 1EH V4+(V3-V4) × 1.6 / 22 V12+(V11-V12) × 20.4 / 22 1FH V4+(V3-V4) × 0.8 / 22 V12+(V11-V12) × 21.2 / 22 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PM042OX1 Output Voltage to Panel V.S. Input Data (continued) Data 20H 21H 22H 23H 24H 25H 26H 27H 28H 29H 2AH 2BH 2CH 2DH 2EH 2FH 30H 31H 32H 33H 34H 35H 36H 37H 38H 39H 3AH 3BH 3CH 3DH 3EH 3FH Positive polarity Output Voltage Negative polarity Output Voltage V4 V11 V5+(V4-V5) × 12 / 12.8 V11+(V10-V11) × 0.8 / 12.8 V5+(V4-V5) × 11.2 / 12.8 V11+(V10-V11) × 1.6 / 12.8 V5+(V4-V5) × 10.4 / 12.8 V11+(V10-V11) × 2.4 / 12.8 V5+(V4-V5) × 9.6 / 12.8 V11+(V10-V11) × 3.2 / 12.8 V5+(V4-V5) × 8.8 / 12.8 V11+(V10-V11) × 4 / 12.8 V5+(V4-V5) × 8 / 12.8 V11+(V10-V11) × 4.8 / 12.8 V5+(V4-V5) × 7.2 / 12.8 V11+(V10-V11) × 5.6 / 12.8 V5+(V4-V5) × 6.4 / 12.8 V11+(V10-V11) × 6.4 / 12.8 V5+(V4-V5) × 5.6 / 12.8 V11+(V10-V11) × 7.2 / 12.8 V5+(V4-V5) × 4.8 / 12.8 V11+(V10-V11) × 8 / 12.8 V5+(V4-V5) × 4 / 12.8 V11+(V10-V11) × 8.8 / 12.8 V5+(V4-V5) × 3.2 / 12.8 V11+(V10-V11) × 9.6 / 12.8 V5+(V4-V5) × 2.4 / 12.8 V11+(V10-V11) × 10.4 / 12.8 V5+(V4-V5) × 1.6 / 12.8 V11+(V10-V11) × 11.2 / 12.8 V5+(V4-V5) × 0.8 / 12.8 V11+(V10-V11) × 12 / 12.8 V5 V10 V7+(V5-V7) × 26.8 / 27.6 V10+(V8-V10) × 0.8 / 27.6 V7+(V5-V7) × 26 / 27.6 V10+(V8-V10) × 1.6 / 27.6 V7+(V5-V7) × 25.2 / 27.6 V10+(V8-V10) × 2.4 / 27.6 V7+(V5-V7) × 24.4 / 27.6 V10+(V8-V10) × 3.2 / 27.6 V7+(V5-V7) × 23.6 / 27.6 V10+(V8-V10) × 4 / 27.6 V7+(V5-V7) × 22.4 / 27.6 V10+(V8-V10) × 5.2 / 27.6 V7+(V5-V7) × 21.2 / 27.6 V10+(V8-V10) × 6.4 / 27.6 V7+(V5-V7) × 20 / 27.6 V10+(V8-V10) × 7.6 / 27.6 V7+(V5-V7) × 18.4 / 27.6 V10+(V8-V10) × 9.2 / 27.6 V7+(V5-V7) × 16.8 / 27.6 V10+(V8-V10) × 10.8 / 27.6 V7+(V5-V7) × 14.8 / 27.6 V10+(V8-V10) × 12.8 / 27.6 V7+(V5-V7) × 12.8 / 27.6 V10+(V8-V10) × 14.8 / 27.6 V7+(V5-V7) × 10.4 / 27.6 V10+(V8-V10) × 17.2 / 27.6 V7+(V5-V7) × 6.4 / 27.6 V10+(V8-V10) × 21.2 / 27.6 V7 V8 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PM042OX1 3) Typical Application Circuit (When VDD2 = +9.5V) 2 V1 R15 1 VDD2 2 V2 0 OHM 1 R1 OPEN 1 V3 R2 2 0 OHM 1 R3 2 V4 1.2K OHM 1 V5 R4 2 OPEN 1 R5 2 V6 OPEN 1 V7 R6 2 10K OHM 1 R7 2 V8 787 1% OHM 1 V9 R8 2 10K OHM 1 R9 2 V10 OPEN 1 V11 R10 2 OPEN 1 R11 2 V12 4.7K OHM 1 V13 R12 2 51K OHM 1 R13 2 V14 OPEN 1 R14 2 0 OHM 5-2) Backlight driving Connector type: JST BHSR-02VS-1, PIN No 2 pins, pitch=3.5mm Pin No Symbol Description 1 VL1 Input terminal (Hi voltage side) 2 VL2 Input terminal (Low voltage side) Remark Wire color : Pink Wire color : White Note 5-11 Note 5-11: Low voltage side of backlight inverter connects with ground of inverter circuits. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PM042OX1 VSS1=VSS2=GND=0V, Ta=25℃ 6.Absolute Maximum Ratings: Parameters Symbol VDD1 VCC VDD2 VGG VGG-VEE VEE VIN VL FL TST TOP Supply Voltage Digital Input Backlight Driving Voltage Backlight Driving Frequency Storage Temperature Operating Temperature MIN. MAX. -0.3 5.0 -0.5 -0.3 -20 -0.5 0 -30 -20 12.0 40.0 40 0.3 VCC+0.5 2000 100 80 80 Unit V V V V V V V V KHz ℃ ℃ Remark 7.Electrical Characteristics VSS1=VSS2=GND=0V, Ta=25℃ 7-1) Recommended Operating Conditions: Item Supply Voltage for Source Driver Supply Voltage for Gate Driver Digital Input Voltage Symbol Min. VDD1 3.0 VDD2 9 VGG VEE VCC 3.0 VIH 0.8VDD1 VIL 0 Typ. 3.3 9.5 20 -10 3.3 - 7-2) Recommended Driving Condition for Back Light Parameter Symbol Min. Typ. Max. Lamp Voltage VL TBD TBD TBD Lamp Current IL TBD TBD TBD Lamp Frequency PL TBD TBD TBD Starting Voltage (25℃) (Reference Value) Starting Voltage (0℃) (Reference Value) Max. Unit 3.6 V 10 V V V 3.6 V VDD1 V 0.2VDD1 V Remark Unit V mA Ta=25℃ Remark IL=6mA Note 7-1 KHz Note 7-2 Vs - - TBD Vrms Note 7-3 Vs - - TBD Vrms Note 7-3 Note 7-1: In order to have proper operation of the B/L, no matter what kind of inverters, the output lamp current must be between Min. and Max. values to avoid the abnormal display image caused by B/L. Note 7-2: The waveform of lamp driving voltage should be as close to a perfect sine wave as possible. Note 7-3: This value is not the output voltage of inverter. The voltage of inverter must be larger than the starting voltage. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PM042OX1 7-3) Power Consumption Parameter Supply Current for Gate Driver (Hi level) Supply Current for Gate Driver (Low level) Supply Current for Source Driver (Digital) Supply Current for Source Driver (Analog) Supply Current for Gate Driver (Digital) LCD Panel Power Consumption Back Light Lamp Power Consumption Symbol IGG IEE IDD1 IDD2 ICC Min. VGH=+20V VEE=-10V VDD1=+3.3V VDD2=+9.5V VCC=+3.3V Typ. TBD TBD TBD TBD TBD TBD TBD Max. TBD TBD TBD TBD TBD TBD TBD Unit mA mA mA mA mA mW W Remark Note 7-4 Note 7-5 Note 7-4: The power consumption for back light is not included. Note 7-5: Back light lamp power consumption is calculated by IL×VL. 8. Pixel Arrangement The LCD module pixel arrangement is stripe configuration. R G B R G B R G B 1 st Line RGB R G B R G B 2 nd Line RGB RGB R G B 3 rd Line 1 st Pixel 320 th Pixel 1 Pixel = R G B RGB 94 th Line RGBRGB RGB 95 th Line RGBRGBRGB 96 th Line RGB RGB The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PM042OX1 9. Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PM042OX1 10. Block Diagram 10-1) TFT-module Block Diagram SYSTEM User connector 30 pin Timing Controller (PVI-2002A) Video Control VDD1 VDD2 DC-DC Converter Gamma Generator Gamma Vcom Generator Vcom VGG / VEE FPC Source Driver IC 4.2" OA TFT-LCD Panel Gate Driver IC If you use PD042OX1, you can apply PVI-2002A(Timing controller) which will gernerate timing signals to support PD042OX1. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PM042OX1 11. Interface Timing 11.1) Timing Parameters AC Electrical Characteristics (VCC=VDD1=3.3V, VDD2=9.5V, GND=VSS1=VSS2=0V, Ta=25℃) Parameter Symbol Min. Typ. Max. Unit CLK Frequency Fclk - 2.5 - MHz CLV1 Period Tcph - 0.4 - us CLK Pulse Width Tcw 8 - - ns Data Set-up Time Tsu 4 - - ns Data Hold Time Thd 2 - - ns Propagation Delay of DIO2/1 Tphl 6 10 15 ns Time That The Last Data to LD Tld 1 - - Tcph Pulse width of LD Twld 2 - - Tcph Time That LD to DIO1/2 Tlds 5 - - Tcph POL Set-up Time Tpsu 6 - - ns POL Hold Time Tphd 6 - - ns OE Pulse Width TOEV 1 - - µs CKV Pulse Width TCKV 2.5 - - µs STV Set-up Time TSUV 700 - - ns STV Hold Time THDV 700 - - ns Horizontal Display Period THDP - 320 - Tcph Horizontal Period Timing Range THP - 400 - Tcph Horizontal Lines Per Field TV 100 104 130 THP Vertical Display Timing Range TDV - 96 - THP The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PM042OX1 30% Tphl Second data (Output) DIO1/2 REV Data (Input) DIO1/2 CLK 70% Tsu 70% Thd 70% 70% Tsu First data Thd Tcw Tcw 30% 30% 2 70% 70% 1 Tcph Fig. 11-1 Operation Mode 70% Tphl 319 70% Last 70% data 320 11.2) Timing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 Negative High-z High-z 70% Tphd 70% Tpsu 70% 70% Tlds Twld High-z Even outputs Odd outputs Tpsu Tphd 70% POL LD DIO 1/2 (Input) LD CLK 70% 70% Last Thd 30% 70% Fig. 11-2 Horizontal timing 70% 30% 70% Tpsu Tphd 30% Positive PM042OX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 Fig. 11-3 Vertical shift clock timing OE TSUV CKV STVU/STVD 50% TOEV THDV TCKV 50% PM042OX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 Fig. 11-4 Vertical timing POL(Even Field) POL(Odd Field) STVU/STVD (VSY) (HSY) THP THDP PM042OX1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PM042OX1 12. Power On Sequence VGG VDD2 VDD1,VCC VSS(0V) VEE OFF OFF ON T1 T3 Logic signal RGB-Video signal T2 T4 1. 10ms≦T1＜T2 2. 0ms＜T3≦T4≦10ms 13. Optical Characteristics 13-1) Specification: Parameter Symbol θ Horizontal θ(to 12 Viewing o’clock) Angle Vertical θ(to 6 o’clock) Contrast Ratio Response time Rise Fall Brightness Luminance Uniformity White Chromaticity Cross Talk CR Tr Tf Condition CR＞10 At optimized viewing angle θ=0° θ=0°/φ=0 U x y θ=0° Ta=25℃ Unit Remarks deg Note 13-1 MIN. TBD TYP. TBD MAX. - TBD TBD - deg TBD TBD - deg 200 400 - - TBD TBD TBD TBD - 15 25 TBD TBD TBD TBD - 30 50 TBD TBD 3.5 ms ms cd/㎡ % % Note 13-2 Note 13-3 Note 13-4 Note 13-5 Note 13-6 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PM042OX1 Note 13-1: The definitions of viewing angles are as follow Lamp connector θ 6 o’clock 9 o’clock 3 o’clock 12 o’clock φ Note 13-2: The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 13-3: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22 PM042OX1 Note 13-4: All optical measurements shall be performed after backlight being turned-on for 30 mins. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 2° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration Note 13-5: The uniformity of LCD is defined as U= The Minimum Brightness of the 9 testing Points The Maximum Brightness of the 9 testing Points Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1 2 3 4 5 6 7 8 9 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:23 PM042OX1 Note 13-6: Cross Talk (CTK) = YA-YB YA ×100% YA: Brightness of Pattern A YB: Brightness of Pattern B Luminance meter: BM-5A or BM-7 fast (TOPCON) Measurement distance: 500 mm +/- 50 mm Ambient illumination: < 1 Lux Measuring direction: Perpendicular to the surface of module Pattern A Pattern B (Gray Level 31) (Gray Level 31, except the black box in the center ) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Measuring Point (A and B are at the same point.) (Gray Level 0) Note 13-7: Topcon BM-5A or BM-7 fast luminance meter 2° field of view is used in the testing (after 30 minutes’ B/L power-on). The typical luminance value is measured at lamp current TBD mA. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:24 PM042OX1 14. Handling Cautions 14-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3.In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 14-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 14-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 14-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 14-5) Polarizer mark The polarizer mark is to describe the direction of wide view angle film how to match up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:25 PM042OX1 15. Reliability Test No Test Item Test Condition 1 High Temperature Storage Test Ta = +80℃, 240 hrs 2 Low Temperature Storage Test Ta = -30℃, 240 hrs 3 High Temperature Operation Test Ta = +80℃, 240 hrs 4 Low Temperature Operation Test Ta = -20℃, 240 hrs 5 6 7 Remark High Temperature & High Humidity Ta = +60℃, 90%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test 0℃Æ+60℃, 50 Cycles (non-operating) Vibration Test 1Hr 1Hr Frequency：10 ~ 55 HZ , Amplitude：1.5 mm 58~500Hz, 1G Sweep time: 11 min (non-operating) Test Period: 6 Cycles for each direction of X, Shock Test 100G, 6ms, X,Y, Z (non-operating) 3 times for each direction Electrostatic Discharge Test 200pF, 0Ω ±200V Y, Z 8 9 (non-operating) 1 time / each terminal Ta: ambient temperature [Judgement Criteria] Under the display quality test conditions with normal operation state, there should be no change which may affect practical display function. 16. Indication of Lot Number Label Indicated contents of the label Lot number OOO-OOOOOO PM042OX1XX Module number Contents of lot number : 1st~3rd—The OEM product 5th—Production year : 1999⇒9, 2000⇒A, 2001⇒B…….. 6th—Production month : 1, 2, 3,….9, A, B, C 7th~8th—Production size : 4.2” ⇒42 9th~10th— Serial numbers : 01~99 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:26 PM042OX1 17. Packing Diagram TBD The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:27 PM042OX1 Revision History Rev. 0.1 Issued Date Oct. 08,2004 Revised Contents New The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:28