DS2106SY DS2106SY Rectifier Diode Replaces October 2001 version, DS4182-5.0 DS4182-5.1 December 2001 FEATURES KEY PARAMETERS ■ Double Side Cooling VRRM 4000V ■ High Surge Capability IF(AV) 3830A IFSM APPLICATIONS 62500A ■ Rectification ■ Freewheel Diode ■ DC Motor Control ■ Power Supplies ■ Welding ■ Battery Chargers VOLTAGE RATINGS Type Number Repetitive Peak Reverse Voltage VRRM V DS2106SY40 4000 DS2106SY39 3900 DS2106SY38 3800 DS2106SY37 3700 DS2106SY36 3600 DS2106SY35 3500 Lower voltage grades available. Conditions VRSM = VRRM + 100V Outline type code: F See Package Details for further information. Fig. 1 Package outline ORDERING INFORMATION When ordering, select the required part number shown in the Voltage Ratings selection table, e.g.: DS2106SY37 Note: Please use the complete part number when ordering and quote this number in any future correspondance relating to your order. 1/7 www.dynexsemi.com DS2106SY CURRENT RATINGS Tcase = 75oC unless otherwise stated Symbol Parameter Conditions Max. Units 3830 A Double Side Cooled IF(AV) Mean forward current IF(RMS) RMS value - 6016 A Continuous (direct) forward current - 5597 A 2525 A IF Half wave resistive load Single Side Cooled (Anode side) IF(AV) Mean forward current IF(RMS) RMS value - 3966 A Continuous (direct) forward current - 3421 A Conditions Max. Units IF Half wave resistive load Tcase = 100oC unless otherwise stated Symbol Parameter Double Side Cooled IF(AV) Mean forward current Half wave resistive load, Tcase = 100oC 2850 A IF(RMS) RMS value Tcase = 100oC 4475 A Continuous (direct) forward current Tcase = 100oC 4190 A IF Single Side Cooled (Anode side) IF(AV) Mean forward current Half wave resistive load, Tcase = 100oC 1920 A IF(RMS) RMS value Tcase = 100oC 3014 A Continuous (direct) forward current Tcase = 100oC 2500 A IF 2/7 www.dynexsemi.com DS2106SY SURGE RATINGS Symbol IFSM I2t IFSM I2t Parameter Surge (non-repetitive) forward current I2t for fusing Surge (non-repetitive) forward current Conditions Max. Units 10ms half sine; Tcase = 150oC 50.0 kA VR = 50% VRRM - 1/4 sine 12.5 x 106 A2s 10ms half sine; Tcase =150oC 62.5 kA VR = 0 1.96 x 106 A2s I2t for fusing THERMAL AND MECHANICAL DATA Min. Max. dc - 0.0095 o Anode dc - 0.019 o Cathode dc - 0.019 o C/W Double side - 0.002 o C/W Single side - 0.004 o C/W Forward (conducting) - 160 o Reverse (blocking) - 150 o Storage temperature range -55 150 o Clamping force 38.0 47.0 Parameter Symbol Conditions Double side cooled Rth(j-c) Thermal resistance - junction to case Units C/W C/W Single side cooled Rth(c-h) Tvj Tstg - Thermal resistance - case to heatsink Clamping force 43.0kN with mounting compound C Virtual junction temperature C C kN 3/7 www.dynexsemi.com DS2106SY CHARACTERISTICS Symbol Conditions Parameter Min. Max. Units VFM Forward voltage At 3000A peak, Tcase = 25oC - 1.15 V IRM Peak reverse current At VRRM, Tcase = 150oC - 250 mA QS Total stored charge IF = 2000A, dIRR/dt = 3A/µs - 5000 µC Irr Peak reverse recovery current Tcase = 150˚C, VR = 100V - 150 A Threshold voltage At Tvj = 150˚C - 0.75 V Slope resistance At Tvj = 150˚C - 0.118 mΩ VTO rT CURVES 5000 10000 Measured under pulse conditions 8000 Mean power dissipation - (W) Instantaneous forward current, IF - (A) 4000 3000 Tj = 150˚C Tj = 25˚C 2000 1000 6000 4000 2000 0 0.5 dc Half wave 3 phase 6 phase 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 00 Instantaneous forward voltage, VF -(V) Fig.2 Maximum (limit) forward characteristics VFM Equation:VFM = A + Bln (IF) + C.IF+D.√IF 2000 4000 Mean forward current, IF(AV) - (A) 6000 Fig.3 Dissipation curves Where A = –0.15357 B = 0.177571 C = 0.000179 D = –0.01294 these values are valid for Tj = 125˚C for IF 500A to 5000A 4/7 www.dynexsemi.com DS2106SY 100000 IF Conditions: Tj = 150˚C VR = 100V IF = 2000A QS 1000 Conditions: Tj = 150˚C VR = 100V IF = 2000A dIF/dt Stored charge, QS - (µC) Reverse recovery current, Irr - (A) IRM 10000 1000 0.1 100 1.0 10 Rate of decay of forward current, dIF/dt - (A/µs) 10 0.1 100 Fig.4 Total stored charge 1.0 10 Rate of decay of forward current, dIF/dt - (A/µs) 100 Fig.5 Maximum reverse recovery current 120 0.1 I2t = Î2 x t 2 12 80 10 60 I2t 40 8 20 6 0 1 10 ms 1 2 3 5 10 20 4 50 Cycles at 50Hz Duration Fig.6 Surge (non-repetitive) forward current vs time (with 50% VRRM at Tcase 150˚C) Thermal impedance - (˚C/W) Anode side cooled I2t value - (A2s x 106) Peak half sine forward current - (kA) 100 0.01 Double side cooled 0.001 Conduction d.c. Halfwave 3 phase 120˚ 6 phase 60˚ 0.0001 0.001 0.01 0.1 1 Time - (s) Effective thermal resistance Junction to case ˚C/W Double side 0.0095 0.0105 0.0112 0.0139 10 Single side 0.019 0.020 0.0207 0.0234 100 Fig.7 Maximum (limit) transient thermal impedance junction to case 5/7 www.dynexsemi.com DS2106SY PACKAGE DETAILS For further package information, please contact your nearest Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE. Hole Ø3.6 x 2.0 deep (One in each electrode) Cathode 37.7 36.0 Ø112.5 max Ø73 nom Ø73 nom Anode Nominal weight: 1600g Clamping force: 50kN ±10% Package outine type code: Y Note: 1. Package maybe supplied with pins and/or tags. 6/7 www.dynexsemi.com DS2106SY POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink / clamping systems in line with advances in device types and the voltage and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the up to date CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete solution (PACs). DEVICE CLAMPS Disc devices require the correct clamping force to ensure their safe operation. The PACs range offers a varied selection of pre-loaded clamps to suit all of our manufactured devices. This include cube clamps for single side cooling of ‘T’ 22mm Clamps are available for single or double side cooling, with high insulation versions for high voltage assemblies. Please refer to our application note on device clamping, AN4839 HEATSINKS Power Assembly has its own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance or our semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest Sales Representative or Customer Services. http://www.dynexsemi.com e-mail: [email protected] HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln. Lincolnshire. LN6 3LF. United Kingdom. Tel: 00-44-(0)1522-500500 Fax: 00-44-(0)1522-500550 DYNEX POWER INC. 99 Bank Street, Suite 410, Ottawa, Ontario, Canada, K1P 6B9 Tel: 613.723.7035 Fax: 613.723.1518 Toll Free: 1.888.33.DYNEX (39639) CUSTOMER SERVICE CENTRES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 SALES OFFICES Mainland Europe Tel: +33 (0)1 58 04 91 00. Fax: +33 (0)1 46 38 51 33 North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) / Tel: (949) 733-3005. Fax: (949) 733-2986. UK, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 These offices are supported by Representatives and Distributors in many countries world-wide. © Dynex Semiconductor 2001 Publication No. DS4182-5 Issue No. 5.1 December 2001 TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification. This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. 7/7 www.dynexsemi.com