BYV28/50 - BYV28/200 3.0A SUPER-FAST GLASS BODY RECTIFIER Features · · · · · · Hermetically Sealed Glass Body Construction Controlled Avalanche Characteristics Super-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop Surge Overload Rating to 90A Peak Low Reverse Leakage Current A A B C D Mechanical Data · · · · · · SOD-64 Case: SOD-64, Glass Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Weight: 1.0 grams (approx.) Mounting Position: Any Marking: Type Number Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Non-Repetitive Peak Reverse Voltage Min Max A 26.0 ¾ B ¾ 4.2 C ¾ 1.35 D ¾ 4.3 All Dimensions in mm Maximum Ratings and Electrical Characteristics Characteristic Dim @ Tj = 25°C unless otherwise specified Symbol BYV28/50 BYV28/100 BYV28/150 BYV28/200 Unit VRRM VRWM VR 50 100 150 200 V VR(RMS) 35 70 100 140 V VRSM 55 110 165 220 V IO 3.5 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 90 A Repetitive Forward Surge Current IFRM 25 A VFM 1.1 V IRM 1.0 150 mA ERSM 20 mJ Average Rectified Output Current Forward Voltage (Note 1) @ IF = 5.0A Peak Reverse Current @ Tj = 25°C at Rated DC Blocking Voltage @ Tj = 165°C Non-Repetitive Reverse Avalanche Energy IR = 0.6A Inductive Load @ Tj = 175°C Reverse Recovery Time (Note 2) Typical Thermal Resistance Junction to Ambient (Note 1) Operating and Storage Temperature Range Notes: trr 30 ns RqJA 25 K/W Tj, TSTG -65 to +175 °C 1.Leads maintained at ambient temperature at a distance of 10mm from the case. 2. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See Figure 4. DS30033 Rev. A - PRELIMINARY 1 of 2 BYV28/50 - BYV28/200 IF, INSTANTANEOUS FWD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 100 4 Single phase half wave Resistive or Inductive load 3 2 1 10 0.1 0.01 0 0 25 50 75 100 125 150 Tj = 25°C 1 175 0 0.6 1.2 1.8 2.4 3.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve IR, REVERSE CURRENT (µA) 1000 100 10 1 0.1 VR = VRRM 0 40 80 120 160 200 Tj, Junction Temperature (°C) Fig. 3 Typical Reverse Characteristics +0.5A 50Ω NI (-) 50Ω NI Device Under Test (+) trr (-) 0 Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 4 Reverse Recovery Time Characteristic and Test Circuit DS30033 Rev. A - PRELIMINARY 2 of 2 BYV28/50 - BYV28/200