CRO2265B-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Digital Radio Equipment • Satellite communications • £(f) (dBc/Hz) 14118 Stowe Drive, Suite B | Poway, CA 92064 TEL: (858) 621-2700 | FAX: (858) 486-1927 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2263 Typ Max Units 2267 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -117 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 0.5 4.5 MHz/V 9 Tuning Sensitivity (avg.) 10 dBm Input Capacitance 50 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 65 °C Max Units Power Output 4 Load Impedance Operating Temperature Range 50 -15 Package Style Power Supply Requirements 7 Vdc MINI-16SM-SP1 Min Typ Supply Voltage (Vcc, nom.) 8 Supply Current (Icc) 34 Vdc 41 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CRO2265B-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 2290 2280 2270 65 °C 25 °C 2260 -15 °C 2250 2240 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT 10 SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 9 8 7 6 0.030 MIN. CUTBACK FROM LIVE PADS 5 4 3 2251 2256 2260 2264 2267 2270 2273 2276 2279 2282 FREQUENCY (MHz) 65 °C 25 °C -15 °C Physical Dimensions SOLDER MASK PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B