DA22 Power Entry Modules with Line Filter www.schurter.com/pg06 IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole, for PCB Mounting Standard- or Medical-Filter and -Fuse drawer C14 70° C Description -Panel Mount: Screw-on mounting on PCB, from rear-side -3 Functions: Appliance Inlet, Fuseholder for fuse-links 5 x 20 mm, Line filter in standard and medical version -PCB solder terminals -Alternative: version for panel mounting KFA Characteristics -Ultra-compact design -All single elements are already wired -For added safety "Extra-Safe" fuse drawers are available Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front -Qualified for use in equipment according IEC/EN 60950 Other versions on request -Fixing on PCB with self-tapping screws 3 mm or pre-inserted nuts M3 -Fuse drawer 1-pole, plus spare fuse case -Fuse drawer 2-pole, with shorting bar -Medical version M80, 220 nF X capacitors -Class X1- and Y1-capacitors for enhanced withstand voltage -Protection class II, 70°C Approvals -VDE License Number: 40001522 -UL License Number: E72928 References General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store, Distributor-Stock-Check, Accessories Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz 1 - 10 A @ Ta 40 °C / 125/250 VAC; 50/60 Hz ¹⁾ standard < 0.5 mA (250 V / 60 Hz) medical < 5 µA (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (1 min/50 Hz) -25 °C to 85 °C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 For PCB mounting ; Additional for ground terminal: Quick connect terminals 6.3 x 0.8 mm angled to pin axis Screw-on mounting: max 3 mm Mounting screw torque max 0.5 Nm Thermoplastic, black, UL 94V-0 Appliance-Inlet/-Outlet Fuseholder Rated Power Acceptance @ Ta 23 °C Power Acceptance @ Ta > 23°C Line Filter MTBF C14 acc. to IEC/EN 60320-1 UL 498 CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 10 A, Protection Class 1 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.4 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Standard and Medical Version, IEC 60939, IEC 60601‑1, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 2'000'000 h acc. to MIL-HB-217 F 1) UL appovals: 1-pole versions up to 10 A, 2-pole versions up to 8 A EMC Products DA22 Power Entry Modules with Line Filter www.schurter.com/pg06 Dimensions 57.6 mm 46.8 57.6 5.8 47.6 4.2 5. 1 39 4.5 2.5 2.8 4 10.5 32.5 36.1 37.6 19.5 6 34 32.7 8.1 1.25 30.4±0.10 0.85 39 ±0.15 47.05 16.2 6.3x0.8 6.05 ±0.10 3. 4. 4 29 1.6 16.2±0.15 38 ±0.20 32.7±0.20 R 4 6.6 38 41 1.6 +0 . 0 10 1.6 +0 . 0 10 +0 . 0 10 3.6 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MΩ] 1 Standard Version with Bleed Resistor 2 x 10 100 2.2 1 2 Standard Version with Bleed Resistor 2x4 100 2.2 1 4 Standard Version with Bleed Resistor 2 x 1.5 100 2.2 1 6 Standard Version with Bleed Resistor 2 x 0.8 100 2.2 1 8 Standard Version with Bleed Resistor 2 x 0.6 100 2.2 1 10 Standard Version with Bleed Resistor 2 x 0.3 100 2.2 1 1 Medical Version (M5) 2 x 10 100 - 1 2 Medical Version (M5) 2x4 100 - 1 4 Medical Version (M5) 2 x 1.5 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 8 Medical Version (M5) 2 x 0.6 100 - 1 10 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Standard version with bleed resistor and Medical version M80 1-/2-pole Medical version M5 1-/2-pole PE’’ PE’’ 1) L PE N 1) Line 2) Load L1 F1 R F2 Cx L2 L’ Cy Cy PE’ 1) 2) L PE N L1 F1 R F2 L’ PE’ Cx L2 2) N’ N’ 1) Line 2) Load EMC Products 3. 6 3. 4 34.4 ±0.10 R 4. 2 ±0 .0 5 4 2.2 R R 30 DA22 Power Entry Modules with Line Filter www.schurter.com/pg06 Derating Curves 1-pole Admissible power acceptance in Watt 1.5 I = 1.0 In I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole 2-pole 2.0 Ambient air temperature Ta °C 1.4 1.2 1.0 I = 1.0 In 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta °C Attenuation Loss Standard version - - - - differential mode _____ common mode 1A 2A 8A 10 A Medical version (M5) 1A 2A 8A 10 A 4A 6A 4A 6A EMC Products DA22 Power Entry Modules with Line Filter www.schurter.com/pg06 Variants Rated Current [A] Filter-Type Fuseholder Comment Order Number 1 Standard Version with Bleed Resistor 1-pole - DA22.1111.11 2 Standard Version with Bleed Resistor 1-pole - DA22.2111.11 4 Standard Version with Bleed Resistor 1-pole - DA22.4111.11 6 Standard Version with Bleed Resistor 1-pole - DA22.6111.11 8 Standard Version with Bleed Resistor 1-pole - DA22.8111.11 10 Standard Version with Bleed Resistor 1-pole 1) DA22.9111.11 1 Standard Version with Bleed Resistor 2-pole - DA22.1121.11 2 Standard Version with Bleed Resistor 2-pole - DA22.2121.11 4 Standard Version with Bleed Resistor 2-pole - DA22.4121.11 6 Standard Version with Bleed Resistor 2-pole - DA22.6121.11 8 Standard Version with Bleed Resistor 2-pole - DA22.8121.11 10 Standard Version with Bleed Resistor 2-pole 1) DA22.9121.11 1 Medical Version (M5) 2-pole - DA22.1321.11 2 Medical Version (M5) 2-pole - DA22.2321.11 4 Medical Version (M5) 2-pole - DA22.4321.11 6 Medical Version (M5) 2-pole - DA22.6321.11 8 Medical Version (M5) 2-pole - DA22.8321.11 10 Medical Version (M5) 2-pole 1) DA22.9321.11 1) UL approvals: versions with 1-pole fuseholder are approved up to 10 A, 2-pole versions up to 8 A. Packaging unit 20 Pcs Required Accessory Description Fusedrawer 2 Fusedrawer with and without Voltage Selector Insert Fingergrip, 2-pole 4301.1401 Extra-Safe, 2-pole 4301.1403 Fingergrip, 1-pole 4301.1405 Extra-Safe, 1-pole 4301.1407 ... Accessories Cord retaining kits Cord retaining strain relief Flat head, H 4700.0008 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal 5092 Appliance Outlet further types to DA22 EMC Products DA22 Power Entry Modules with Line Filter www.schurter.com/pg06 Connector Overview complete IEC Connector C15, Rewireable, Straight 0101 IEC Connector C15A, Rewireable, Straight 0102 IEC Connector C15A, Rewireable, Straight 0102-G IEC Connector C15A, Rewireable, Angled 0112 IEC Connector C13, Rewireable, Angled 4012 Connector further types to DA22 ... Power Cord Overview complete Power Cord with IEC Connector C13, Angled 0311 Power Cord with IEC Connector C13, Angled 3011 Power Cord with IEC Connector C13, Angled 3012 Power Cord with IEC Connector C13, Angled 3013 Power Cord with IEC Connector C13 3020 Power Cord further types to DA22 ... The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.