D5-/ www.daysemi.jp N-Channel 30-V (D-S) MOSFET FEATURES PRODUCT SUMMARY VDS (V) 30 RDS(on) (Ω) ID (A)a 0.0057 at VGS = 10 V 40 0.0076 at VGS = 4.5 V 40 • Halogen-free • TrenchFET® Power MOSFET • 100 % Rg Tested • 100 % UIS Tested Qg (Typ.) 13.8 nC RoHS COMPLIANT APPLICATIONS TO-251 • Low-Side Switch • Notebook DC/DC D G S G D S Top View N-Channel MOSFET ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted Parameter Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (TJ = 150 °C) Pulsed Drain Current Avalanche Current Avalanche Energy Symbol VDS VGS TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C L = 0.1 mH TC = 25 °C Continuous Source-Drain Diode Current TA = 25 °C TC = 25 °C TC = 70 °C Maximum Power Dissipation TA = 25 °C TA = 70 °C Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature)d, e Limit 30 ± 20 40a 40a 22.7b, c 19.7b, c 70 35 61 40a 4.1b, c 50 32 5b, c 3.2b, c - 55 to 150 260 ID IDM IAS EAS IS PD TJ, Tstg Unit V A mJ A W °C THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambientb, f Maximum Junction-to-Case (Drain) t ≤ 10 s Steady State Symbol RthJA RthJC Typical 20 2.0 Maximum 25 2.5 Unit °C/W Notes: a. Based on TC = 25 °C. Package limited. b. Surface Mounted on 1" x 1" FR4 board. c. t = 10 s. 1 D5-/ www.daysemi.jp SPECIFICATIONS TJ = 25 °C, unless otherwise noted Parameter Symbol Test Conditions Min. VDS VGS = 0 V, ID = 250 µA 30 Typ. Max. Unit Static Drain-Source Breakdown Voltage VDS Temperature Coefficient ΔVDS/TJ VGS(th) Temperature Coefficient ΔVGS(th)/TJ Gate-Source Threshold Voltage V 27 ID = 250 µA mV/°C - 5.5 VGS(th) VDS = VGS , ID = 250 µA 3 V Gate-Source Leakage IGSS VDS = 0 V, VGS = ± 20 V ± 100 nA Zero Gate Voltage Drain Current IDSS VDS = 30 V, VGS = 0 V 1 VDS = 30 V, VGS = 0 V, TJ = 55 °C 5 On-State Drain Currenta ID(on) Drain-Source On-State Resistancea Forward Transconductancea RDS(on) gfs VDS ≥ 5 V, VGS = 10 V 1 µA A 50 VGS = 10 V, ID = 20 A 0.0047 0.0057 VGS = 4.5 V, ID = 18 A 0.0062 0.0076 VDS = 15 V, ID = 20 A 90 Ω S b Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs Gate-Drain Charge Qgd Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Rg 1720 VDS = 15 V, VGS = 0 V, f = 1 MHz 130 VDS = 15 V, VGS = 10 V, ID = 20 A VDS = 15 V, VGS = 4.5 V, ID = 20 A td(off) 29 44 13.8 21 5.0 f = 1 MHz VDD = 15 V, RL = 15 Ω ID ≅ 1.0 A, VGEN = 4.5 V, Rg = 1 Ω 1.1 2.2 25 40 14 25 30 45 tf 15 25 td(on) 11 20 tr td(off) nC 4.6 td(on) tr pF 355 VDD = 15 V, RL = 15 Ω ID ≅ 1.0 A, VGEN = 10 V, Rg = 1 Ω tf 9 15 27 40 9 15 Ω ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulse Diode Forward Current ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Reverse Recovery Fall Time ta Reverse Recovery Rise Time tb TC = 25 °C 40 70 IS = 4.1 A, VGS = 0 V IF = 4.1 A, dI/dt = 100 A/µs, TJ = 25 °C A 0.75 1.2 V 25 50 ns 17 35 nC 13 12 ns Notes: a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %. b. Guaranteed by design, not subject to production testing. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 D5-/ www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 70 1.2 VGS = 10 thru 4 V 1.0 50 I D - Drain Current (A) I D - Drain Current (A) 60 40 VGS = 3 V 30 20 TC = 25 °C 0.6 0.4 TC = 125 °C 0.2 10 0 0.0 0.5 1.0 1.5 TC = - 55 °C 0.0 0.0 2.0 0.5 1.0 2.0 2.5 VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 3.0 2400 0.007 C - Capacitance (pF) 0.006 VGS = 10 V 0.005 Ciss 1800 VGS = 4.5 V 1200 600 Coss 0.004 Crss 0 0.003 0 10 20 30 40 50 60 6 0 70 ID - Drain Current (A) 12 18 24 30 VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current and Gate Voltage Capacitance 1.7 10 ID = 20 A ID = 20 A VDS = 15 V 1.5 8 VDS = 7.5 V 6 VDS = 22.5 V 4 VGS = 10 V (Normalized) R DS(on) - On-Resistance VGS - Gate-to-Source Voltage (V) 1.5 VDS - Drain-to-Source Voltage (V) 0.008 R DS(on) - On-Resistance (Ω) 0.8 1.3 VGS = 4.5 V 1.1 0.9 2 0 0 6 12 18 Qg - Total Gate Charge (nC) Gate Charge 24 30 0.7 - 50 - 25 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature 3 D5-/ www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 100 0.030 0.025 TJ = 150 °C R DS(on) - On-Resistance (Ω) I S - Source Current (A) 10 TJ = 25 °C 1 0.1 TJ = - 50 °C 0.01 0.020 0.015 TJ = 125 °C 0.010 0.005 TJ = 25 °C 0.001 0.0 0.000 0.2 0.4 0.6 0.8 1.0 1.2 0 1 2 VSD - Source-to-Drain Voltage (V) 0.2 160 Power (W) VGS(th) Variance (V) 200 - 0.1 ID = 1 mA - 0.7 0 25 50 75 100 8 9 10 125 80 0 0.001 150 0.01 0.1 1 Time (s) TJ - Temperature (°C) Single Pulse Power (Junction-to-Ambient) 100 Limited by RDS(on)* 100 µs 1 ms 10 I D - Drain Current (A) 7 120 Threshold Voltage 10 ms 100 ms 1 1s 10 s 0.1 100 s DC TA = 25 °C Single Pulse BVDSS Limited 0.01 0.1 1 10 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient 4 6 40 ID = 250 µA - 25 5 On-Resistance vs. Gate-to-Source Voltage 0.5 - 1.0 - 50 4 VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage - 0.4 3 100 10 D5-/ www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted I D - Drain Current (A) 80 60 Package Limited 40 20 0 25 0 50 75 100 125 150 TC - Case Temperature (°C) 60 2.5 48 2.0 Power (W) Power (W) Current Derating* 36 24 12 1.5 1.0 0.5 0 0.0 0 25 50 75 100 125 150 0 25 50 75 100 125 TC - Case Temperature (°C) TA - Ambient Temperature (°C) Power, Junction-to-Case Power, Junction-to-Ambient 150 * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. 5 D5-/ www.daysemi.jp TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 70 °C/W 3. TJM - TA = PDMZthJA(t) Single Pulse 0.01 10 -4 4. Surface Mounted 10 -3 10 -2 10 -1 1 Square Wave Pulse Duration (s) 100 10 1000 Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.1 0.05 0.02 Single Pulse 0.01 10 -4 10 -3 10 -2 10 -1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case 6 1 Package Information TOĆ251AA (DPAK) E A L2 b2 Dim A A1 b b1 b2 c c1 D E e L L1 L2 L3 D L3 L1 b1 L b MILLIMETERS c1 e c A1 INCHES Min Max Min Max 2.21 2.38 0.087 0.094 0.89 1.14 0.035 0.045 0.71 0.89 0.028 0.035 0.76 1.14 0.030 0.045 5.23 5.43 0.206 0.214 0.46 0.58 0.018 0.023 0.46 0.58 0.018 0.023 5.97 6.22 0.235 0.245 6.48 6.73 0.255 0.265 2.28 BSC 0.090 BSC 8.89 9.53 0.350 0.375 1.91 2.28 0.075 0.090 0.89 1.27 0.035 0.050 1.15 1.52 0.045 0.060 ECN: S-03946—Rev. E, 09-Jul-01 DWG: 5346 Note: Dimension L3 is for reference only. www.GD\VHPLMS 1 Legal Disclaimer Notice www.daysemi.jp Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Din-Tek Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Din-Tek”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Din-Tek makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Din-Tek disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Din-Tek’s knowledge of typical requirements that are often placed on Din-Tek products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Din-Tek’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Din-Tek products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Din-Tek product could result in personal injury or death. Customers using or selling Din-Tek products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Din-Tek personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Din-Tek. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Din-Tek documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Din-Tek Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Din-Tek documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. 1