BUS IC DC/DC CONVERTER MOTOR DRIVER IC RIPPLE COUNTER I/O IC DRIVER IC SENSOR IC SENSOR INTERFACE IC HALIOS® optical switch ÿ HALIOS® Micromouse Hall sensor interface 8 *, par. out Hall sensor interface 6 *, ser. out PIR controller Hall sensor interface 4 *, par. out tion to eliminate disturbances caused by housing reflections such ÿ Parameter adjustment and functional as scratches. 11 12 data read back via SPI ÿ Configureable inputs and outputs The infrared emitting diodes (IRED, signal diodes) and the photo- ÿ – 40°C to + 85°C operating temperature diode are placed on a PCB in a required formation. The ability to ÿ LQFP 48 package detect the motion of an object on the surface depends on chang- APPLICATION 10 13 24 SCL 23 Driver LED 1 SDA DIG_IO3 39 22 VDDI LEDGND1 Analog ground driver LED 1 DIG_IO4 40 21 NC DGND Digital ground NC 41 20 NC 19 LEDGND2 18 ILED2 ILED5 44 17 NC NC 45 16 NC NC 46 15 MISO NC 47 14 MOSI TEST 48 13 SCK DVDD CS SCK Digital supply SPI data in: slave mode: MOSI, master mode: MISO 15 MISO light intensity of LED pairs. SPI data out: slave mode: MISO, master mode: MOSI 18 ILED2 Driver LED2 19 LEDGND2 Analog ground driver LED2 computers and handheld devices With 4k of EEPROM the customer has enough memory space for 22 VDDI Digital supply for I2C - interface ÿ Switches, rotation-sliders, proximity-sensors even complex applications and an easy to use posibility to protect 23 SDA I C data in/out, open collector ÿ Compact 2-D input device his know how even in a ASSP. 24 SCL I2C clock input 25 INT I2C interrupt output For automotive, industrial and pc applications a version 909.03 28 TEST _ OUT Test output with integrated IR diodes and photodiode is available in an ASIC 29 VPP Supply voltage for E2 write procedures 30 ILED3 Driver LED3 31 LEDGND3 Analog ground driver LED3 32 DIG _ OUT2 Programable digital output 2 33 RESET Reset input 34-35 DIG _ IO5 Programable digital input/output 5-6 36 DIG _ OUT1 Programable digital output 1 37-40 DIG _ IO1 Programable digital input/output 1-4 42 ILED4 Driver LED4 43 LEDGND4 Analog ground driver LED4 44 ILED5 Driver LED5 48 TEST Test mode enable BLOCK DIAGRAM AVDD VDD DVDD DVDD CS Filter Demod TIN SCK SPI MOSI MISO DVDD LED1 µC control LED2 µC 1 2 3 4 5 6 7 8 9 10 11 12 AVAILABILITY 2 Samples Series available Q4/2005 (E909.02) Q2/2006 (E909.03) E909.03* *Available for automotive, industrial or pc applications. RAM MUX LED3 E909.02 LEDGND4 43 SPI clock: slave mode: input, master mode: output; es in the optical path of the reflected signal, changing the relative package. ILED4 42 SPI chip select: slave mode: input, master mode: output MOSI plus 27 26 25 DIG_IO2 38 14 Navigation key for mobile phones, laptop INT Low standby current 7 NC ÿ ILED1 31 30 29 28 CS suppressing ambient light and also has an inherent self calibra- 6 33 32 NC Operational up to 100klux ambient light Analog supply 34 DVDD ÿ AVDD 35 DIG_IO1 37 DGND ent Light Independent Optical System). HALIOS® is high efficient 5 36 VPP Optical working principle without mechanics Analog ground NC ÿ AGND ILED3 192 Byte RAM 4 NC ÿ The sensor measures the optical reflections of an object on a cover above the sensor using a system so called HALIOS® (High Ambi- Transimpedance amplifier input LEDGND3 4kByte EEPROM Analog test input TIN LEDGND1 ÿ TEST _ IN 3 DIG_OUT2 8-Bit microcontroller with 4MHz clockrate 1 ILED1 ÿ Description RESET the sensor-structure and the detection algorithms. Name AVDD different applications Pin DIG_IO5 tection of movements. The EEPROM allows a free configuration of AGND The IC is an optical sensor which provides a non-mechanical de- Programable detection algorithms for many DIG_IO6 Supply voltage range 3.0V to 5.5V ÿ TIN ÿ PACKAGE DIG_OUT1 PINNING NC DESCRIPTION TEST_IN FEATURES ÿ E909.02|03 coming soon TEST_OUT ÿ HALIOS® Micromouse ROM DVDD 2,8-9,16-17,20-21,26-27,41,45-47 Not connected DAC LED4 LEDC LEDGND 90 AGND DGND Note ELMOS Semiconductor AG (below ELMOS) reserves the right to make changes to the product contained in this publication without notice. ELMOS assumes no responsibility for the use of any circuits described herein, conveys no licence under any patent or other right, and makes no representation that the circuits are free of patent infringement. While the information in this publication has been checked, no responsibility, however, is assumed for inaccuracies. ELMOS does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of a life-support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications. Copyright © 2005 ELMOS Reproduction, in part or whole, without the prior written consent of ELMOS, is prohibited. www.elmos.de | [email protected] elmos product catalog june 2005 91