D-Sub Right Angle DIP Termination 17LE Series 17LE-13150-2 □ -FA 17LE-23250-2 □ -FA 17LE-13370-2 □ -FA FEATURES ・17LE series are connected to a circuit by through hole DIP solder termination style mounting on PCB and fastened on the bracket by stud or jack socket. ・Number of contact : 9, 15, 25 and 37 ・Studs and hex nuts are available to fasten with mating half. This connection with PCB and metal shell is grounding and improving the resistance against EMI. ・The metal shell is in Nickel plating. The pin connectors of metal shell are beat-finished. ・4 types of ground tabs are mountable on the bracket for protection against EMI. SPECIFICATIONS Rated Voltage 300V AC (r.m.s.) Rated Current 5A / Contact Dielectric Withstanding Voltage 1000V AC (r.m.s.) / 1 minute Insulation Resistance 1000M Ω (min.) at 500V DC Contact Resistance 15m Ω (max.) Operating Temperature -25℃∼ 85℃ MATERIAL / FINISH RoHS Compliant Compliant Item Material / Finish Insulator Polyamide Resin (UL94V-0）/ Black Shell Steel / Ni Plating Contact Eyelet Copper Alloy / Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag Plating over Ni Plating Brass / Ni Plating ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 090703 http://www.ddknet.co.jp 17LE Series Unit：mm ○ Right Angle Socket Connectors 17LE-13250-27(D3AB)-FA FA: Lead Free Mating Style １: Socket Connector Deviation No Digit: Connector Only Shell Plating ３: Ni Plating （D3AB) Number of Contact 9, 15, 25, 37 Key Position 0: No Key Grounding Tab (Please refer to page 4.) No Digit: Less Grounding Tab B：with Ground Tab 17L-004B C：with Board Lock 17L-004C-FA D：with Ground Tab 17L-004D ※ Ground tab B and D can not be combined with stud. Thread Size A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC Contact Tail Style 2: Right Angle DIP Termination Contact Plating 6: Contact Area: Au(0.8 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating 8: Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating 2: with Stud Type1 (17L-002 □ ) 3: with Jack Socket Type 2 (17L-003 □ 1) 4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C ・Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. 17LE-13xx0-27(D3xx)-FA Socket Connector A B D (E) Ｊ (6.25) Thread Size （Refer to part number code） (6.25) 0.3 1 (n+1)/2 Contact No.1 Contact 0.1 2.28 Panel Mounting Dimensions(Rear Mounting) 12.6 E F 0.1 0.1 n-φ1.0 0.1 Through Hole 2-φ3.2 Fixed with adhesive part F M3 0.5 Thread 0.1 DDK 1 n+1 2 6.25 n Contact No. D 0.1 B 0.1 PCB Mounting Dimensions （Applicable PCB Thickness:ｔ＝１． ６ （View from mounting pattern side) Section Y−Y 3.2 n+3 2 2.84 0.1 M3 0.5 Thread 0.5 G 0.8 2.84 2.84 0.5 9.6 6.1 0.3 B 6.4 Y (Ｂ) 4-R2.5 R Y (9.6) X 10.0 0 7.8 12.5 n X +0.3 2.84 6.5 0.7 H 0.2 (n+3)/2 Contact +0.3 0 No.n Contact C Number of Contact A B C D E F G H J 9 30.80 24.99 16.80 10.98 1.37 2.74 8.22 18.50 31.00 15 39.10 33.32 25.12 19.20 1.37 2.74 16.44 26.80 39.30 25 53.04 47.04 38.84 33.12 1.38 2.76 30.36 40.70 53.20 37 69.32 63.50 55.30 49.68 1.38 2.76 46.92 57.00 69.50 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 2 0.19） 0.1 Through Hole 17LE Series Unit：mm ○ Right Angle Plug Connectors 17LE-23250-27(D3AB)-FA FA: Lead Free Connector Type 2: Plug Connector Deviation No Digit: Connector Only Shell Plating ３: Ni Plating （D3AB) Number of Contact 9, 15, 25, 37 Key Position 0: No Key Contact Tail Style 2: Right Angle DIP Termination Grounding Tab (Please refer to page 4.) No Digit: Less Grounding Tab B：with Ground Tab 17L-004B C：with Board Lock 17L-004C-FA D：with Ground Tab 17L-004D ※ Ground tab B and D can not be combined with stud. Thread Size A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC Contact Plating 6: Contact Area: Au(0.8 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating 7: Contact Area: Au(0.4 μ m) over Ni Plating Tail Area: Sn-Ag over Ni Plating 8: Contact Area: Au(Flash) over Ni Plating Tail Area: Sn-Ag over Ni Plating 2: with Stud Type1 (17L-002 □ ) 3: with Jack Socket Type 2 (17L-003 □ 1) 4: with Jack Socket Type 3 (17L-003 □ 3) ・□ : Thread Type A, B, C ・Regarding the combinations of grounding tab, stud and jack socket, please refer to the list on page 6. 17LE-23xx0-27(D3xx)-FA Plug Connector A B C +0.3 0 Ｊ Thread Size （Refer to part number code.） 0.7 (E) (6.25) H (6.25) 0.3 0.2 D 6.5 No.n Contact +0.3 4-R2.5 No.1 Contact R (n+1)/2 Contact B F n+3 2 0.1 Through Hole 2-φ3.2 0.1 2.28 F 0.1 6.25 １ SectionY−Y D 0.1 B 0.1 PCB Mounting Dimensions （Applicable PCB Thickness：ｔ＝１． ６ （View from mounting pattern side） 3.2 ｎ 0.5 Ｍ３ 0.5 Thread DDK n+1 2 E n-φ1.0 0.1 0.1 Through Hole 0.1 Fixed with adhesive part G 2.84 Ｍ３ 0.5 Thread Contact No. 2.84 0.8 (9.6) 5.9 Y (B) 0.1 Panel Mounting Dimensions(Rrear Mounting) 12.6 9.6 0.5 0.3 6.4 Y 2.84 X 10.0 0 8.25 n 1 X 12.5 2.84 (n+3)/2 Contact Number of Contact A B C D E F G H J 9 30.80 24.99 16.80 10.98 1.37 2.74 8.22 18.50 31.00 15 39.10 33.32 25.12 19.20 1.37 2.74 16.44 26.80 39.30 25 53.00 47.04 38.84 33.12 1.38 2.76 30.36 40.70 53.20 37 69.30 63.50 55.30 49.68 1.38 2.76 46.92 57.00 69.50 ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 3 0.19） 17LE Series Unit：mm ○ Ground Tab Ground Tab for 17LE Ground tab enables 17LE series to ground to PCB easily. Ground Tab with Tapping Hole Part Number : 17L-004B Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. Thread M3 0.5 Ground Tab with Board Lock Part Number : 17L-004C-FA Material / Finish: Copper Alloy / Sn-Ag Plating Thread M3 0.5 Ground Tab with Thrugh Hole Part Number : 17L-004D Material / Finish: Steel / Ni Plating ※ Combination of stud 17L-002 □ is not available. φ 3.2 Hole ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 4 17LE Series Unit：mm ○ Mounting on Panel and PCB Panel MountingDimensions （□ : Thread Size) K min. Stud Pan-head 13.0 min. Type 1 Panel Connector Screw 4-R1.0 Stud (17L-002 □ ) ※ Connector can not be fastened on the panel. Hex Nut M3 0.5 Thread 0.3 Connector 4-R2.5 R 6.5 Jack Socket +0.3 0 0.2 6.5 6.1 J +0.3 0 H 10.0 Type 2 B 0.1 ※ Connector can not be fastened Jack Socket (17L-003 □ 1) on the panel. Type 3 4.8 Hex Nut 2-φ3.2 4-R3.4 Connector Jack Socket 7.8 11.4 min. M3 0.5 Thread Applicable PCB Thickness 1.6 0.19 10 C min. B 0.1 ※ Connector can be fastened on the panel. （Panel Thickness：0.8 ∼ 1.3） Jack Socket (17L-003 □ 3) □: Ａ: Ｂ: Ｃ: 0.1 Number of Thread SIze M2.6 0.45 M3 0.5 #4-40UNC B C H J K 24.99 16.30 18.50 31.0 34.09 15 33.32 24.64 26.80 39.3 42.42 25 47.04 38.35 40.70 53.2 56.14 37 63.50 54.80 57.00 69.5 72.60 Contact 9 Ground Tab Ground Tab Ground Tab (Board Lock) Screw (not attached) G 0.1 0.1 n-φ1.0 0.1 Through Hole 2-φ3.2 0.1 Through Hole Number of B D E F G 0.1 F 9 24.99 10.98 1.37 2.74 8.22 2.84 E 15 33.32 19.20 1.37 2.74 16.44 25 47.04 33.12 1.38 2.76 30.36 37 63.50 49.68 1.38 2.76 46.92 Contact F 0.1 D 0.1 B 0.1 PCB Mounting Dimensions （Applicable PCB Thickness:ｔ＝１． ６ （View from mounting pattern side) 0.19） ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 5 17LE Series Unit：mm ○ 17LE Series Mounting Accessories Deviation ※ ASSEMBLED: The mounting accessories are assembled with connector. ATTACHED: The mounting accessories are attached separately. 17LE-13 □□ 0-27-FA 17LE-23 □□ 0-27-FA 17L-004B 17L-004D 17L-004C-FA 17L-004E-FA Ground Tab Part Number t=1.6 None t=1.6 M3 0.5 Panel Mounting t=1.6 M3 0.5 φ3.2 Hole t=0.8 M3 0.5 φ3.2 Hole Stud Jack Socket Operation Part Number Press in ground tab 17L-004E-FA None Type 1 17LE- □ 3 □□ 0-27(D41)-FA Stud 17L-002 □ and panhead screw(L=6) are ASSEMBLED. 17L-002 □ Connector can not be fastened on the panel. Ground tab 17L-004C-FA is fastened by stud 17L-002 □ and panhead screw (L=7). 17LE- □ 3 □□ 0-27(D2 □ )-FA 17LE-□3□□0-27(D2□C)-FA Type 2 Connector can not be fastened on the panel. To prevent loosening, screws are locked by adhesive. 17L-003 □ 1 Jack socket Press in ground tab Press in ground tab Ground tab 17L-003 □ 1 and 17L-004B and jack hex nut(M3) are socket 17L-003 □ 1 socket 17L-003 □ 1 fastened by jack ASSEMBLED. is ASSEMBLED. 17L-004D and jack is ASSEMBLED. 17L-004C-FA is socket 17L-003 □ 1 and hex nut(M3). 17LE- □ 3 □□ 0-27(D3 □ )-FA 17LE-□3□□0-27(D3□B)-FA 17LE-□3□□0-27(D3□D)-FA 6.1 Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 1 is ASSEMBLED. 17LE-□3□□0-27(D3□H)-FA Press in ground 17LE-□3□□0-27(D3□C)-FA tab 17L-004E-FA 6.5 and 17L-003 □ 1 is ATTCHED. M3 17LE-□3□□0-27(D3□K)-FA Type 3 Connector can be fastened on the panel. Panel thickness: 1.3 max. Jack socket 17L-003 □ 3 17L-003 □ 3 and hex nut(M3) are ASSEMBLED. 4.8 7.8 Press in ground tab Press in ground tab Ground tab 17L-004B and jack 17L-004D and jack 17L-004C-FA is socket 17L-003 □ 3 socket 17L-003 □ 3 fastened by jack socket 17L-003 □ 3 is ASSEMBLED. is ASSEMBLED. and hex nut(M3). 17LE- □ 3 □□ 0-27(D4 □ )-FA 17LE-□3□□0-27(D4□B)-FA 17LE- □ 3 □□ 0-27(D4 □□ )-FA 17LE-□3□□0-27(D4□C)-FA M3 Press in ground tab 17L-004E-FA and jack socket 17L-003 □ 3 is ASSEMBLED. 17LE-□3□□0-27(D4□H)-FA Press in ground tab17L-004E-FA and 17L-003 □ 3 is ATTACHED. 17LE-□3□□0-27(D4□K)-FA Not available Recommended □ : Thread Size (Stud) A：M2.6 0.45 B：M3 0.5 C：＃ 4-40UNC ※ Above list shows combinations of ground tab, stud and jack socket. The deviation is given in parentesis in each sections. Regarding the detail, please contact our sales. ◎ Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. http://www.ddknet.co.jp 6