FMV-595 Duplex V /Duplex A & D Two-way Video with One Duplex Audio and One Duplex Data The FMV-595 is a duplex Video transmission system with one duplex Audio and one Data port, ideal for CCTV cameras and traffic surveillance. Status indicators on Video, Sync, Data, carrier detect, voltage, temperature, and optical levels are monitored via LEDs. Video Audio System Design All units come in a small module or Insert Card version. The cards can be inserted into our 18-slot, 19” rackmountable card cage (CC-18-80W), or one of our smaller Desk Top Card Racks (DTCR series). Data The Desk Top Card Racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. They can sit on a flat surface as a larger stand-alone unit, or can be surface mounted with the flanges provided. Each one of our card housings operates with an appropriate power supply. The regulated switching power supply has short circuit protection and an input operating voltage of 85-265 VAC. 865 1310 1550 1270-1610 Type Wavelength Mode Suffix Features • Multimode or singlemode operation over one fiber • 8 MHz video bandwidth • 10 Hz to 20 KHz audio bandwidth • True DC restoration • Flat frequency response • Complies with RS-170 and RS-170A EIA video standards • Compatible with NTSC, PAL and SECAM • No EMI or RFI and no ground loops • Stand Alone or Rack Mount • Ideal for CCTV cameras, video conferencing and ITS Fiber Type Output Power Receiver Sensitivity Optical Loss Budget Range* Conn Type (CWDM) • • • • • • • LED MM L0/L1 50/125µ 62.5/125µ -16 dBm -34 dBm 18 dB 3 km ST LED MM L2/L3 09/125µ -10 dBm -34 dBm 24 dB 25 km FC L4 09/125µ -3 dBm -36 dBm 33 dB 25-90 km FC Laser SM * Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. FM Video/Audio/Data Transmission Video Video in/out impedance Video in/out level Video bandwidth Differential gain Differential phase Linearity Tilt Compatibility Signal to noise ratio FM carrier frequency Connector type Audio Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type Data Data rate Bit error rate Data formats available Connector type General Dimensions & Weight Temperature Humidity Operating voltage Vibration/Shock Diagnostics Status monitoring Sample Configuration 75 Ω 1 volt peak to peak, 1.5 volts max 5 Hz to 7 MHz @ -3dB < 1.0 % typical < 1.0° typical ± 1.1 % typical ≤ 0.5 % typical NTSC, PAL, SECAM, RS-170, RS-170A >67 dB using RS-250C standards @ 1 km 70 MHz BNC 600 Ω or 10k Ω − balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz > 60 dB < 1.0 %, 1 KHz at maximum modulation Hi-density 15 pin DB9 (DE15) DC to 300 Kbps 10-9 Async RS-232, RS-422, RS-485/2W, Genlock, Manchester, 20 mA current loop, TTL, or six Contact Closures Hi-density 15 pin DB9 (DE15) Stand Alone (SA): 7.16” L x 5.21” W x .94” H 39 oz Insert Card (IC): 6.3” L x 0.8” W x 4.0” H 16 oz Operating: -20° C to +70° C; Storage; -30° C to +85° C 0 to 95% non-condensing 12 VDC (200 mA) or 9-24 VAC (6W) or 110/220 VAC Up to 5 g's/Up to 12 g's LED indicator Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA