HITTITE HMC383LC4

HMC383LC4
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
11
Typical Applications
Features
The HMC383LC4 is ideal for:
Gain: 15 dB
• Point-to-Point Radios
Saturated Output Power: +18 dBm
• Point-to-Multi-Point Radios & VSAT
Output IP3: +25 dBm
• Test Equipment & Sensors
Single Positive Supply: +5V @ 100 mA
• LO Driver for HMC Mixers
50 Ohm Matched Input/Output
• Military & Space
RoHS Compliant 4x4 mm Package
Functional Diagram
General Description
The HMC383LC4 is a general purpose GaAs PHEMT
MMIC Driver Amplifier housed in a leadless RoHS
compliant SMT package. The amplifier provides 15 dB
of gain and +18 dBm of saturated power from a single
+5V supply. Consistent gain and output power across
the operating band make it possible to use a common driver/LO amplifier approach in multiple radio
bands. The RF I/Os are DC blocked and matched to
50 Ohms for ease of use. The HMC383LC4 is housed
in a RoHS compliant leadless 4x4 mm package allowing the use of surface mount manufacturing techniques.
Electrical Specifi cations, TA = +25° C, Vdd = +5V
Parameter
Min.
Frequency Range
Gain
12
Gain Variation Over Temperature
Max.
Min.
15
0.02
Typ.
Max.
Min.
16 -24
13
0.03
16
0.02
Typ.
Max.
Min.
24 - 28
12
0.03
15
0.02
Typ.
Max.
28 - 30
10
0.03
GHz
13
0.02
Units
dB
0.03
dB/ °C
Input Return Loss
14
14
11
13
dB
Output Return Loss
14
17
10
8
dB
15
dBm
17
16
dBm
dBm
Output Power for 1 dB Compression
(P1dB)
12
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Noise Figure
Supply Current (Idd)
11 - 16
Typ.
12 - 16
75
15
13.5
16.5
13
16
12
17
18
24
25
25
23
10.5
8
7.5
8
100
135
75
100
135
75
100
135
75
100
dB
135
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
mA
HMC383LC4
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
20
20
16
S21
S11
S22
0
-10
12
8
-40C
4
0
-20
8
12
16
20
24
28
12
32
14
16
Input Return Loss vs. Temperature
20
22
24
26
28
30
Output Return Loss vs. Temperature
0
0
+25C
+85C
-40C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
18
FREQUENCY (GHz)
FREQUENCY (GHz)
-10
-15
-20
+25C
+85C
-40C
-5
-10
-15
-20
12
14
16
18
20
22
24
26
28
30
12
14
16
FREQUENCY (GHz)
18
20
22
24
26
28
30
26
28
30
FREQUENCY (GHz)
P1dB vs. Temperature
Psat vs. Temperature
22
22
20
20
18
18
16
16
14
14
Psat (dBm)
P1dB (dBm)
11
+25C
+85C
12
10
8
+25C
+85C
-40C
6
4
LINEAR & POWER AMPLIFIERS - SMT
GAIN (dB)
RESPONSE (dB)
10
12
+25C
+85C
-40C
10
8
6
4
2
2
0
0
12
14
16
18
20
22
24
FREQUENCY (GHz)
26
28
30
12
14
16
18
20
22
24
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 17
HMC383LC4
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Power Compression @ 30 GHz
20
20
18
18
Pout (dBm), GAIN (dB), PAE (%)
11
Pout (dBm), GAIN (dB), PAE (%)
Power Compression @ 18 GHz
16
14
Pout (dBm)
Gain (dB)
PAE (%)
12
10
8
6
4
2
Pout (dBm)
Gain (dB)
PAE (%)
16
14
12
10
8
6
4
2
0
-16 -14 -12 -10
-8
-6
-4
-2
0
2
4
6
0
-14
8
-12
-10
INPUT POWER (dBm)
NOISE FIGURE (dB)
IP3 (dBm)
26
22
+25C
+85C
-40C
14
10
15
18
21
24
27
30
0
2
4
6
8
28
30
28
30
+25C
+85C
-40C
12
14
16
18
20
22
24
26
FREQUENCY (GHz)
Gain & Power vs. Supply Voltage @ 18 GHz
Reverse Isolation vs. Temperature
0
19
-10
18
ISOLATION (dB)
GAIN (dB), P1dB (dBm), Psat (dBm)
-2
13
12
11
10
9
8
7
6
5
4
3
2
1
0
FREQUENCY (GHz)
17
16
-20
+25C
+85C
-40C
-30
-40
-50
15
14
4.5
Gain
P1dB
Psat
-60
-70
5
Vdd Supply Voltage (Vdc)
11 - 18
-4
Noise Figure vs. Temperature
30
12
-6
INPUT POWER (dBm)
Output IP3 vs. Temperature
18
-8
5.5
12
14
16
18
20
22
24
26
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC383LC4
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Absolute Maximum Ratings
Typical Supply Current vs. Vdd
Drain Bias Voltage (Vdd)
+5.5 Vdc
Vdd (V)
Idd (mA)
RF Input Power (RFIN)(Vdd = +5Vdc)
+10 dBm
+4.5
99
Channel Temperature
175 °C
+5.0
100
+5.5
101
Continuous Pdiss (T= 85 °C)
(derate 10 mW/°C above 85 °C)
0.92 W
Thermal Resistance
(channel to ground paddle)
98 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
Note: Amplifi er will operate over full voltage ranges shown above
LINEAR & POWER AMPLIFIERS - SMT
11
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. ALL DIMENSIONS ARE IN INCHES [MM]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 19
HMC383LC4
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Pin Descriptions
Pin Number
Function
Description
1, 2, 4-15, 17,
18, 20-24
N/C
No connection required. These pins may be connected
to RF/DC ground without affecting performance if using
grounded coplanar wave guide transmission lines.
3
RFIN
This pad is AC coupled and
matched to 50 Ohms.
16
RFOUT
This pad is AC coupled and
matched to 50 Ohms.
19
Vdd
Power Supply Voltage for the amplifier. External bypass
capacitors of 100 pF, 1,000 pF and 2.2 μF are required.
GND
Package base has an exposed metal ground
that must be connected to RF/DC ground.
Vias under the device are required
11
Interface Schematic
Application Circuit
11 - 20
Component
Value
C1
100 pF
C2
1,000 pF
C3
2.2 μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC383LC4
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 12 - 30 GHz
Evaluation PCB
List of Materials for Evaluation PCB 122198 [1]
Item
J1, J2
Description
2.92 mm PCB mount K-connector
J3, J4
DC Pin
C1
100 pF capacitor, 0402 pkg.
C2
1,000 pF Capacitor, 0603 pkg.
C3
2.2μF Capacitor, Tantalum
U1
HMC383LC4 Amplifier
PCB [2]
108535 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 21