HITTITE HMC441LC3B_08

HMC441LC3B
v04.1208
11
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
Typical Applications
Features
The HMC441LC3B is ideal for use as a medium power
amplifier for:
Gain: 14 dB
• Point-to-Point Radios
Single Positive Supply: +5V @ 90 mA
• Point-to-Multi-Point Radios & VSAT
50 Ohm Matched Input/Output
• LO Driver for HMC Mixers
12 Lead Ceramic 3x3mm SMT Package: 9mm2
Saturated Output Power: +21.5 dBm @ 27% PAE
• Military EW & ECM
Functional Diagram
General Description
The HMC441LC3B is an efficient GaAs PHEMT
MMIC Medium Power Amplifier housed in a leadless
RoHS compliant SMT package. Operating between
6 and 18 GHz, the amplifier provides 14 dB of gain,
+21.5 dBm of saturated power and 27% PAE from
a +5V supply. This 50 Ohm matched amplifier does
not require any external components and operates
from a single positive supply, making it an ideal
linear gain block or driver for HMC SMT mixers. The
HMC441LC3B is compatible with high volume surface
mount manufacturing techniques, and the I/Os are
DC blocked for further ease of integration.
Electrical Specifi cations, TA = +25° C, Vdd = +5V
Parameter
Min.
Frequency Range
Gain
10
Gain Variation Over Temperature
Max.
Min.
14
0.015
Typ.
Max.
Min.
8.5 - 12.5
13
0.02
17
0.015
Typ.
Max.
Min.
12.5 - 14.0
14
0.02
17
0.015
Typ.
Max.
14.0 - 18.0
10
0.02
GHz
14
0.015
Units
dB
0.02
dB/ °C
Input Return Loss
10
13
20
13
dB
Output Return Loss
12
15
17
14
dB
20
dBm
21.5
dBm
dBm
Output Power for 1 dB
Compression (P1dB)
Saturated Output Power (Psat)
11 - 78
Typ.
6.0 - 8.5
16
19
17
20
20
17
21.5
20
17
22.5
Output Third Order Intercept (IP3)
30
32
32
32
Noise Figure
4.5
4.5
4.5
4.5
Supply Current (Idd)
90
115
90
115
90
115
90
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
dB
115
mA
HMC441LC3B
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
Gain vs. Temperature
20
20
15
18
10
16
14
S21
S11
S22
0
-5
-10
12
10
+25C
+85C
-40C
8
11
6
-15
4
-20
2
-25
0
4
6
8
10
12
14
16
18
20
6
7
8
9
FREQUENCY (GHz)
10
11
12
13
14
15
16
17
18
FREQUENCY (GHz)
Input Return Loss vs. Temperature
Output Return Loss vs. Temperature
0
0
-2
+25C
+85C
-40C
-4
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
-10
-15
-20
-6
+25C
+85C
-40C
-8
-10
-12
-14
-16
-18
-25
-20
6
7
8
9
10
11
12
13
14
15
16
17
18
6
7
8
9
FREQUENCY (GHz)
11
12
13
14
15
16
17
18
16
17
18
FREQUENCY (GHz)
P1dB vs. Temperature
Psat vs. Temperature
25
25
24
24
23
23
22
22
Psat (dBm)
P1dB (dBm)
10
21
20
19
18
17
21
20
19
+25C
+85C
-40C
18
+25C
+85C
-40C
LINEAR & POWER AMPLIFIERS - SMT
5
GAIN (dB)
RESPONSE (dB)
Broadband Gain & Return Loss
17
16
16
15
15
6
7
8
9
10
11
12
13
14
FREQUENCY (GHz)
15
16
17
18
6
7
8
9
10
11
12
13
14
15
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 79
HMC441LC3B
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
Power Compression @ 11 GHz
Power Compression @ 15 GHz
30
Pout (dBm), GAIN (dB), PAE (%)
11
Pout (dBm), GAIN (dB), PAE (%)
30
Pout
Gain
PAE
25
20
15
10
5
0
-10
-8
-6
-4
-2
0
2
4
6
8
Pout
Gain
PAE
25
20
15
10
5
0
-10
10
-8
-6
-4
INPUT POWER (dBm)
-2
0
2
Output IP3 vs. Temperature
10
34
9
8
NOISE FIGURE (dB)
IP3 (dBm)
32
30
+25C
+85C
-40C
26
6
8
10
17
18
17
18
Noise Figure vs. Temperature
36
28
4
INPUT POWER (dBm)
24
+25C
+85C
-40C
7
6
5
4
3
2
22
1
20
0
6
7
8
9
10
11
12
13
14
15
16
17
18
6
7
8
9
FREQUENCY (GHz)
12
13
14
15
16
Reverse Isolation vs. Temperature
34
0
32
-10
30
Gain
P1dB
Psat
IP3
28
26
ISOLATION (dB)
GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
11
FREQUENCY (GHz)
Gain, Power & Output IP3
vs. Supply Voltage @ 11 GHz
24
22
20
18
+25C
+85C
-40C
-20
-30
-40
-50
16
14
4.5
-60
5
Vdd (V)
11 - 80
10
5.5
6
7
8
9
10
11
12
13
14
15
16
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC441LC3B
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
Absolute Maximum Ratings
Drain Bias Voltage (Vdd)
+6 Vdc
RF Input Power (RFIN)(Vdd = +5 Vdc)
+15 dBm
Channel Temperature
175 °C
Continuous Pdiss (T = 85 °C)
(derate 8.2 mW/°C above 85 °C)
0.74 W
Thermal Resistance
(channel to ground paddle)
122 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Typical Supply Current vs. Vdd
Vdd (V)
Idd (mA)
+5.5
92
+5.0
90
+4.5
88
Note: Amplifier will operate over full voltage range shown above
LINEAR & POWER AMPLIFIERS - SMT
11
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11 - 81
HMC441LC3B
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
Pin Descriptions
Pin Number
Function
Description
1, 3, 7, 9
GND
Package bottom must also be
connected to RF/DC ground
2
RFIN
This pin is AC coupled
and matched to 50 Ohms.
4-6
10, 12
N/C
This pin may be connected to RF/DC ground.
Performance will not be affected.
8
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
11
Vdd
Power Supply Voltage for the amplifier.
External bypass capacitors are required.
11
Interface Schematic
Application Circuit
11 - 82
Component
Value
C1
100 pF
C2
1,000 pF
C3
2.2 μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC441LC3B
v04.1208
GaAs PHEMT MMIC MEDIUM
POWER AMPLIFIER, 6 - 18 GHz
Evaluation PCB
List of Materials for Evaluation PCB 109712 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J4
DC Pin
C1
100 pF Capacitor, 0402 Pkg.
C2
1000 pF Capacitor, 0603 Pkg.
C3
2.2 μF Capacitor, Tantalum
U1
HMC441LC3B Amplifier
PCB [2]
109710 Evaluation PCB, 10 mils
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 83