Surface Mount Lensed High Performance Chip LEDs Technical Data SunPower Series HSMA-L640 HSMC-L640 HSML-L640 Features Description • High Brightness AlInGaP Material • Three Colors Available • Compatible with IR Solder Process • Narrow Viewing Angle • Small 3.0 x 1.5 mm Package • Available in 8 mm Tape on 7” (180 mm) Diameter Reels The HSMx-L640 is a Chip LED with an integrated lens. The lens concentrates the emitted light into a narrow viewing angle, which has the effect of doubling the on-axis intensity. These LEDs are optimum for light piping, backlighting buttons and switches, and applications, where as much flux as possible is required on axis. Applications These LEDs utilize aluminum indium gallium phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. • • • • Keypad Backlighting Light Piping LCD Backlighting Front Panel Indicator The available colors are 590 nm Amber, 605 nm Orange, and 626 nm Red. The 3.0 x 1.5 mm package closely matches industry standard sizes for chip capacitors which makes it compatible with automated pick and place equipment. This package is compatible with IR and convective reflow soldering processes. Device Selection Guide Amber 590 nm HSMA-L640 Orange 605 nm HSML-L640 Red 626 nm HSMC-L640 2 Package Dimensions 1.5 1.5 1.3 0.6 3 2 CATHODE MARK 1.8 1.6 TOLERANCES: ± 0.2 mm Notes: 1. Dimensions are in millimeters. 2. Tolerance, ± 0.2 mm Absolute Maximum Ratings at TA = 25°C Parameter DC Forward Current[3][4][5] Power Dissipation Reverse Current VR = 5 V Operating Temperature Range Storage Temperature Range[6] Value 30 Units mA 81 100 -30 to +85 -40 to +100 mW µA °C °C Notes: 3. Derate linearly as shown in Figure 4. 4. Drive currents between 1 mA and 30 mA are recommended for best long term performance. 5. Operating at currents below 1 mA is not recommended. Please contact your Agilent representative for further information. 6. Maximum temperature for tape and reel packaging is 60°C. Optical Characteristics at TA = 25°C Part Number HSMA-L640 HSML-L640 HSMC-L640 Color Amber Orange Red Luminous Intensity IV (mcd) @IF 20 mA[7] Min. Typ. 63 130 63 130 63 100 Peak Wavelength λpeak (nm) Typ. 592 609 635 Color, Dominant Wavelength λd[8] (nm) Typ. 590 605 626 Viewing Angle 2θ 1/2 Degrees[9] Typ. 70 70 70 Notes: 7. The luminous intensity, I V, is measured at the peak of the spatial radiation pattern. 8. The dominant wavelength, λd, is derived from the CIE Chromaticity diagram, and represents the perceived color of the device. 9. θ 1/2 is the off-axis angle where the luminous intensity is 1/ 2 the peak intensity. 3 Electrical Characteristics at TA = 25°C Part Number HSMA-L640 HSML-L640 HSMC-L640 Forward Voltage VF (Volts) @ I F = 20 mA Typ. Max. 2.02 2.4 1.98 2.4 1.90 2.4 Color Amber Orange Red Reverse Breakdown VR (Volts) @ IR = 100 µA Min. 5 5 5 Capacitance C (pF) VF = 0 f = 1 MHz Typ. 40 40 40 Thermal Resistance RθJ-PIN (°C/W) 500 500 500 1.0 ORANGE RELATIVE INTENSITY AMBER RED 0.5 0 550 600 650 700 WAVELENGTH – nm Figure 1. Relative Intensity vs. Wavelength. RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 5 mA) IF – FORWARD CURRENT – mA 5 100 50 20 10 5 2 1 0.5 4 3 2 1 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. 0 5 10 15 20 25 IF – FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. DC Forward Current. 4 IF – FORWARD CURRENT – mA 35 30 25 20 15 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 4. Maximum DC Current vs. Ambient Temperature. Light Intensity (Iv) Bin Limits[1] Bin ID A B C D E F G H J K L M Intensity Min. 0.11 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 (mcd) Max. 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 Bin ID N P Q R S T U V W X Y Intensity Min. 28.50 45.00 71.50 112.50 180.00 285.00 450.00 715.00 1125.00 1800.00 2850.00 (mcd) Max. 45.00 71.50 112.50 180.00 285.00 450.00 715.00 1125.00 1800.00 2850.00 4500.00 Tolerance: ± 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representative for information on currently available bins. 5 Color Bin Limits[1] Yellow/Amber Color Bins[1] Bin ID A B C D E F Tolerance: ± 0.5 nm Dom. Wavelength (nm) Min. Max. 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 594.5 594.5 597.0 Orange Color Bins[1] Bin ID A B C D E F Dom. Wavelength (nm) Min. Max. 597.0 600.0 600.0 603.0 603.0 606.0 606.0 609.0 609.0 612.0 612.0 615.0 Tolerance: ± 1 nm Note: 1. Bin categories are established for classification or products. Products may not be available in all bin categories. Pleae contact your Agilent representative for information of currently available bins. 6 20° 10° 0° 1.0 30° RELATIVE INTENSITY 0.8 40° 50° 0.6 60° 0.4 70° 0.2 80° 90° 1.0 0.8 0.6 0.4 0.2 0 10 20 30 40 50 60 70 80 90 100 RELATIVE INTENSITY DEGREES Figure 5. Intensity vs. Angle. 1.6 4.4 1.6 10 SEC. MAX. TEMPERATURE 240°C MAX. 4°C/SEC. MAX. 140-160°C 4°C/SEC. MAX. PWB CAMBER DIRECTION OVER 2 MIN. TIME TOLERANCES: ± 0.2 mm Figure 6. Recommended SMT Reflow Soldering Profile. USER FEED DIRECTION CATHODE SIDE PRINTED LABEL Figure 8. Reeling Orientation. Figure 7. Recommended Solder Patterns. 7 2 ± 0.5 Ø 21 ± 0.8 +1 Ø 60 – 0 Ø 13.0 ± 0.2 11.4 ± 1.0 +0 Ø 180 – 3 9 ± 0.3 Figure 9. Reel Dimensions. 1.7 ± 0.1 4 ± 0.1 ∅ 1.5 +0.1 0 CATHODE 0.2 ± 0.05 1.75 ± 0.1 3.5 ± 0.05 3.35 ± 0.1 8 ± 0.3 CENTER HOLE 1.8 USER DIRECTION OF FEED 2 ± 0.05 4 ± 0.1 Figure 10. Tape Dimensions. END THERE SHALL BE A MINIMUM OF 40 mm OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. START MOUNTED WITH COMPONENTS THERE SHALL BE A MINIMUM OF 40 mm OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE. Figure 11. Tape Leader and Trailer Dimensions. 150 mm-360 mm MAY CONSIST OF CARRIER AND/OR COVER TAPE. Storage Condition: 5 to 30˚ C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 +/– 5˚C for 20 hours. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-6272EN July 19, 2002 5988-7315EN