1SS390 Diodes Band switching diode 1SS390 zApplication High frequency switching zDimensions (Unit : mm) zLead size figure (Unit : mm) 0.8 0.12±0.05 0.6 0.8±0.05 1.6±0.1 1.2±0.05 1.7 zFeatures 1) Ultra small mold type. (EMD2) 2) High reliability EMD2 zConstruction Silicon epitaxial planer zStructure 0.3±0.05 0.6±0.1 JEDEC :SOD-523 ROHM : EMD2 JEITA : SC-79 zTaping dimensions (Unit : mm) 0.2±0.05 φ1.5±0.05 2.0±0.05 φ0.5 0.95±0.06 0 空ポケット zAbsolute maximum ratings (Ta=25°C) Parameter Symbol IF Forward current VR Forward voltage Junction temperature Tj Storage temperature Tstg 8.0±0.15 0.2 2.0±0.05 4.0±0.1 Limits 100 35 125 -55 to +125 1.26±0.05 0 0.6 1.3±0.06 0 2.45±0.1 3.5±0.05 1.75±0.1 4.0±0.1 0.76±0.05 Unit mA V ℃ ℃ zElectrical characteristics (Ta=25°C) Parameter Forward voltage Reverse current Capacitance between terminals Forward operating resistance Symbol VF IR Ct Min. - Typ. - Max. 1.0 10 1.2 Unit V nA pF rf - - 0.9 Ω Conditions IF=10mA VR=25V VR=6V , f=1MHz IF=2mA , f=100MHz , RL=100Ω Rev.C 1/3 1SS390 Diodes zElectrical characteristic curves (Ta=25°C) Ta=125℃ Ta=75℃ 1 Ta=25℃ Ta=-25℃ 0.1 Ta=75℃ 1 0.1 Ta=25℃ 0.01 Ta=-25℃ 0.001 1 0.1 0.0001 0 1.1 1.2 5 10 15 20 25 30 0 35 0.2 REVERSE CURRENT:IR(nA) 840 830 AVE:840.2mV 820 0.16 0.9 0.14 0.12 0.1 0.08 AVE:0.0145nA 0.06 0.04 0.8 0.7 0.4 0.3 0.2 0.1 0 VF DISPERSION MAP AVE:0.849pF Ct DISPERSION MAP IR DISPERSION MAP 100 15 8.3ms 10 AVE:4.95A 5 0 100 PEAK SURGE FORWARD CURRENT:IFSM(A) PEAK SURGE FORWARD CURRENT:IFSM(A) 1cyc Ifsm 10 1 Ifsm 8.3ms 8.3ms 1cyc 0.1 1000 10 1 Ifsm 10 NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS 100 0.1 1 10 TIME:t(ms) IFSM-t CHARACTERISTICS IF=10mA 10 1ms Sin(θ＝180) D=1/2 AVERAGE RECTIFIDE FORWARD CURRENT:Io(A) Mounted on epoxy board IM=1mA FORWARD POWER DISSIPATION:Pf(W) Rth(j-c) DC 0.15 DC 0.1 D=1/2 0.1 Sin(θ＝180) 0A 0V 0.05 time 300us 1 0.001 0 0.01 0.1 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 1000 100 0.2 0.2 Rth(j-a) 100 t 0.1 1 IFSM DISPERSION MAP Ta=25℃ VR=6V f=1MHz n=10pcs 0.5 0 20 30 0.6 0.02 810 20 1 Ta=25℃ VR=25V n=30pcs 0.18 CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ta=25 IF=100mA n=30pcs 850 10 REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS REVERSE VOLTAGE：VR(V) VR-IR CHARACTERISTICS 860 PEAK SURGE FORWARD CURRENT:IFSM(A) CAPACITANCE BETWEEN TERMINALS:Ct(pF) 10 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 FORWARD VOLTAGE：VF(V) VF-IF CHARACTERISTICS TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) f=1MHz 10 REVERSE CURRENT:IR(nA) FORWARD CURRENT:IF(mA) Ta=125℃ 0.01 FORWARD VOLTAGE:VF(mV) 10 100 100 0 0.05 0.1 0.15 AVERAGE RECTIFIED FORWARD CURRENT：Io(A) Io-Pf CHARACTERISTICS 0.2 0 0 Io VR D=t/T VR=40V T Tj=125℃ 25 50 75 100 AMBIENT TEMPERATURE:Ta(℃) Derating Curve(Io-Ta) t Rev.C 125 2/3 1SS390 Diodes 10 0.2 ELECTROSTATIC DDISCHARGE TEST ESD(KV) AVERAGE RECTIFIDE FORWARD CURRENT:Io(A) DC 0.15 D=1/2 Sin(θ＝180) 0.1 0A 0V 0.05 Io t T 0 0 VR D=t/T VR=40V Tj=125℃ 25 50 75 100 CASE TEMPARATURE:Tc(℃) Derating Curveﾞ(Io-Tc) 8 4 AVE:0.96kV 2 0 125 AVE:5.45kV 6 C=200pF R=0Ω C=100pF R=1.5kΩ ESD DISPERSION MAP Rev.C 3/3 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog. Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System www.rohm.com Copyright © 2007 ROHM CO.,LTD. THE AMERICAS / EUPOPE / ASIA / JAPAN Contact us : webmaster@ rohm.co. jp 21, Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix1-Rev2.0