TECHNICAL DATA IN74LS86 Quad 2-Input Exclusive OR Gate This device contains four independent 2-input Exclusive-OR gates. It performs the Boolean functions Y=A ⊕ B=AB+AB in positive logic. ORDERING INFORMATION IN74LS86N Plastic IN74LS86D SOIC TA = 0° to 70° C for all packages PIN ASSIGNMENT LOGIC DIAGRAM FUNCTION TABLE Inputs PIN 14 =VCC PIN 7 = GND Output A B Y L L L L H H H L H H H L 1 IN74LS86 MAXIMUM RATINGS* Symbol Parameter Value Unit VCC Supply Voltage 7.0 V VIN Input Voltage 7.0 V VOUT Output Voltage 5.5 V Tstg Storage Temperature Range -65 to +150 °C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Max Unit 5.25 V VCC Supply Voltage 4.75 VIH High Level Input Voltage 2.0 VIL Low Level Input Voltage 0.8 V IOH High Level Output Current -0.4 mA IOL Low Level Output Current 8.0 mA TA Ambient Temperature Range +70 °C 0 V DC ELECTRICAL CHARACTERISTICS over full operating conditions Guaranteed Limit Symbol Parameter Test Conditions Min Max Uni t -1.5 V VIK Input Clamp Voltage VCC = min, IIN = -18 mA VOH High Level Output Voltage VCC = min, IOH = -0.4 mA VOL Low Level Output Voltage VCC = min, IOL = 4 mA 0.4 VCC = min, IOL = 8 mA 0.5 VCC = max, VIN = 2.7 V 40 µA VCC = max, VIN = 7.0 V 0.2 mA -0.8 mA -100 mA 10 mA IIH High Level Input Current IIL Low Level Input Current VCC = max, VIN = 0.4 V IO Output Short Circuit Current VCC = max, VO = 0 V (Note 1) ICC Supply Current VCC = max Total with outputs high Total with outputs low 2.7 -20 V V 15 Note 1: Not more than one output should be shorted at a time, and duration should not exceed one second. 2 IN74LS86 AC ELECTRICAL CHARACTERISTICS (TA=25°C, VCC = 5.0 V, CL = 15 pF, RL = 2 kΩ, tr =15 ns, tf = 6.0 ns) Symbol Parameter Min Max Unit tPLH Propagation Delay, Input A or B to Output Y (Other input low) 23 ns tPHL Propagation Delay, Input A or B to Output Y (Other input low) 17 ns tPLH Propagation Delay, Input A or B to Output Y (Other input high) 30 ns tPHL Propagation Delay, Input A or B to Output Y (Other input high) 22 ns Figure 1. Switching Waveforms Figure 2. Switching Waveforms NOTES A. CL includes probe and jig capacitance. B. All diodes are 1N916 or 1N3064. Figure 3. Test Circuit 3 IN74LS86 N SUFFIX PLASTIC DIP (MS - 001AA) A Dimension, mm 8 14 B 7 1 Symbol MIN MAX A 18.67 19.69 B 6.1 7.11 5.33 C F L C -T- SEATING PLANE N G M K J H D 0.25 (0.010) M T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. D 0.36 0.56 F 1.14 1.78 G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AB) Dimension, mm A 14 8 H B 1 G P 7 R x 45 C -TK D SEATING PLANE J 0.25 (0.010) M T C M NOTES: 1. Dimensions A and B do not include mold flash or protrusion. 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. F M Symbol MIN MAX A 8.55 8.75 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 G 1.27 H 5.27 J 0° 8° K 0.1 0.25 M 0.19 0.25 P 5.8 6.2 R 0.25 0.5 4