High Efficiency Red KPSA03-101 SPEC NO: DSAB5533 REV NO: V.6 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU PAGE: 3 OF 4 KPSA03-101 SMT Reflow Soldering Instructions Number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB5533 REV NO: V.6 DATE: MAR/22/2005 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU D PAGE: 4 OF 4