3.0X2.0mm SMD CHIP LED LAMP KPK-3020PBC BLUE Features Description !3.0mmX2.0mm SMT LED, 1.3mm THICKNESS. The Blue source color devices are made with InGaN on !LOW POWER CONSUMPTION. SiC Light Emitting Diode. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE:2000PCS/REEL Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is±0.2(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0362 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/25/2001 DRAWN:X.H. FU PAGE: 1 OF4 Selection Guide Par t No . Dic e KPK-3020PBC Iv (m c d ) @ 20 m A L en s Ty p e BLUE( InGaN) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 20 60 12 0 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Blue λD Dominate Wavelength ∆λ1/2 Ty p . Max . Un it s Tes t Co n d it io n s 468 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Halfwidth Blue 25 nm IF=20mA C Capacitance Blue 65 pF VF=0V;f=1MHz VF Forward Voltage Blue 3.65 4.2 V IF=20mA IR Reverse Current Blue 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C Par am et er B lu e Un it s Power dissipation 10 2 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA Reverse Voltage 5 V Operating Temperature -20°C To +80°C Storage Temperature -30°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: KDA0362 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/25/2001 DRAWN:X.H. FU PAGE: 2 OF4 Blue KPK-3020PBC SPEC NO: KDA0362 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/25/2001 DRAWN:X.H. FU PAGE: 3 OF4 KPK-3020PBC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0362 APPROVED: REV NO: V.1 CHECKED: DATE: SEP/25/2001 DRAWN:X.H. FU PAGE: 4 OF4