MES30B 16.5~30W AC-DC Single Output and Medical Type Desktop series Features : Universal AC input / Full range 2 pole AC inlet IEC320-C8 Class power ( without earth pin) Full output 3~48V safety approval Protections: Short circuit / Overload / Over voltage / Over temp. Fully enclosed plastic case Fix switching frequency and regulation Topology: Top switch circuit LED indicator for power on Approvals: UL / CUL / TUV / CB / CE 2 years warranty EN 60601-1 IEC 60601-1 SPECIFICATION ORDER NO. MES30B-0P1J MES30B-1P1J MES30B-1-1P1J MES30B-2P1J MES30B-3P1J MES30B-4P1J MES30B-5P1J MES30B-6P1J MES30B-8P1J SAFETY MODEL NO. DC VOLTAGE OUTPUT MES30B-0 Note.2 3.3V MES30B-1 MES30B-1-1 MES30B-2 MES30B-3 MES30B-4 MES30B-5 MES30B-6 MES30B-8 5V 7.5V 12V 15V 18V 24V 48V 0.62A 9V RATED CURRENT 5A 5A 3.33A 3.33A 2.5A 2.0A 1.66A 1.25A CURRENT RANGE 0 ~ 5A 0 ~ 5A 0 ~ 3.33A 0 ~3.33A 0 ~ 2.5A 0 ~ 2.0A 0 ~ 1.66A 0 ~ 1.25A 0 ~ 0.62A RATED POWER 16.5W 25W 25W 30W 30W 30W 30W 30W 30W 100mVp-p RIPPLE & NOISE (max.) Note.3 30mVp-p 30mVp-p 40mVp-p 50mVp-p 50mVp-p 60mVp-p 70mVp-p 80mVp-p Fixed VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.4 8.0% 5.0% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% LINE REGULATION Note.5 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION Note.6 8.0% 5.0% 4.0% 4.0% 3.0% 2.0% 2.0% 2.0% 2.0% SETUP, RISE, HOLD UP TIME 300ms, 50ms, 16ms at full load INPUT VOLTAGE RANGE 90 ~ 264VAC 135 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 65% AC CURRENT INRUSH CURRENT (max.) 0.8A / 100VAC LEAKAGE CURRENT (max.) OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC EMI CONDUCTION & RADIATION (Note. 7) HARMONIC CURRENT EMS IMMUNITY MTBF OTHERS CONNECTOR NOTE DIMENSION 70% 72% 74% 76% 78% 78% 80% 82% 35A / 230VAC 0.1mA / 240VAC 150~350% rated output power 112 ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 110 ~ 140% rated output voltage Protection type : Hiccup mode, recovers automatically after fault condition is removed Tj 135 typically (IC1) detect on main control IC Protection type : Shut down o/p voltage, recovers automatically after temperature goes down 0 ~ +65 (Refer to output load derating curve) 20% ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03% / ( 0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL2601-1, IEC601-1, EN60601-1 approved I/P-O/P: 5656VDC I/P-O/P: 100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55011(CISPR11) class B Compliance to EN61000-3-2,3 Compliance to EN60601-1-2 (EN61000-4-2,3,4,5,6,8,11), ENV50204, light industry level, criteria A 400Khrs min. MIL-HDBK-217F (25 ) 108*67*36mm (L*W*H) 0.3kg ; 54pcs/ 20kg / CARTON PACKING PLUG Standard type P1J: 2.1 CABLE SPT-2 16AWG 4FT for 3.3 ~ 7.5V ; UL1185 18AWG 6FT for 9 ~48V * 5.5 * 11mm, turning fork type, center positive for stock ; Other type available by customer requested 1.All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2.DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4.Tolerence: includes set up tolerance, line regulation, load regulation. 5.Line regulation is measured from low line to high line at rated load. 6.Load regulation is measured from 0% to 100% rated load. 7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. File Name:MES30B-SPEC 2008-05-08 M U SE PS -3202B5 sseerrii ee ss 16.5~30W AC-DC Single Output and Medical Type Desktop Mechanical Specification Unit:mm 36 SPT-2 16AWG 4ft for 3.3V,5V,7.5V UL 1185 18AWG 6ft for others 106 36 11 100 10mm 67 SWITCHING ADAPTOR C"+" POWER LED ID 2.1 x OD 5.5 108 69.9 Plug Assignment 18 33.5 Standard plug: P1J (option) 3 67 42 45 P1J R1 OUTPUT CENTER + RUBBER FOOTX4 NAME PLATE Static Characteristics Derating Curve 100 LOAD (%) 100 LOAD (%) P/N 50 0 15 30 40 45 Ta ( 60 ) 70 80 60 0 50 60 70 80 90 100 260 INPUT VOLTAGE File Name:MES30B-SPEC 2008-05-08