3008 POWER INDUCTORS High Reliability Power Inductors ML369PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit. Weight 22 – 25 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.37 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤1.5 mm Isat (A)5 Irms (A)6 SRF (MHz)4 Inductance2 DCR max3 Part number1 ±20% (µH) (Ohms) min typ 10% drop 20% drop 30% drop 20°C rise 40°C rise ML369PJB561MLZ0.56 0.072 231 3301.82.02.1 1.1 1.6 ML369PJB801MLZ0.80 0.092 178 2551.61.71.8 0.88 1.3 ML369PJB102MLZ1.0 0.125 154 2201.31.41.5 0.72 1.0 ML369PJB152MLZ1.5 0.134 119 1701.11.31.3 0.70 0.96 ML369PJB222MLZ2.2 0.175 105 1501.01.11.1 0.68 0.88 ML369PJB332MLZ 3.3 0.28579.8 114 0.810.860.88 0.59 0.76 ML369PJB472MLZ 4.7 0.35060.9 87 0.680.730.74 0.54 0.64 ML369PJB562MLZ 5.6 0.45054.6 78 0.620.670.70 0.46 0.58 ML369PJB682MLZ 6.8 0.50052.5 75 0.580.610.63 0.40 0.54 ML369PJB822MLZ 8.2 0.60042.7 61 0.520.560.58 0.36 0.48 ML369PJB103MLZ10 0.65039.2 56 0.460.510.52 0.34 0.45 ML369PJB123MLZ12 0.79034.3 49 0.450.480.50 0.30 0.40 ML369PJB183MLZ18 1.25 26.6 38 0.350.380.40 0.26 0.35 ML369PJB223MLZ22 1.50 24.5 35 0.290.330.34 0.23 0.30 ML369PJB333MLZ33 2.30 16.1 23 0.270.300.31 0.20 0.26 ML369PJB473MLZ47 3.00 14.7 21 0.220.230.24 0.17 0.22 ML369PJB683MLZ68 4.75 12.6 18 0.180.190.20 0.14 0.18 ML369PJB104MLZ 100 6.85 9.8 14 0.150.160.16 0.13 0.17 ML369PJB124MLZ120 7.00 9.1 13 0.0840.0940.10 0.110.15 ML369PJB154MLZ150 8.00 7.7 11 0.0800.0880.092 0.100.14 ML369PJB184MLZ180 9.00 7.0 10 0.0700.0780.082 0.100.13 ML369PJB224MLZ220 11.50 6.39 0.0670.0730.076 0.080 0.12 ML369PJB334MLZ330 18.00 4.97 0.0590.0640.066 0.070 0.10 1. When ordering, please specify testing code: ML369PJB104MLZ Testing:Z =COTS H=Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A or equivalent. ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. Typical DC current at which the inductance drops the specified amount from its value without current. 6. Typical current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document ML438-1 Revised 08/11/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com 3008 POWER INDUCTORS ML369PJB Series (3008) Typical L vs Current Typical L vs Frequency 1000 1000 330 µH 100 100 µH Inductance (µH) Inductance (µH) 330 µH 33 µH 10 10 µH 3.3 µH 1 0.1 1 0.1 33 µH 10 µH 10 3.3 µH 1.0 µH 1 1.0 µH 0.01 100 µH 100 10 0.1 0.01 0.1 Current (A) 1 10 Frequency (MHz) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 Isat Irms 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document ML438-2 Revised 08/11/11 Phone 800-981-0363 Fax 847-639-1508 E-mail [email protected] Web www.coilcraft-cps.com