MPB80 SERIES The MPB80 combines high density power and other standard features usually found in premium power systems. The low-profile package neatly fits 1U height constraints in an industry-standard 3" X 5" footprint. This Power Factor Corrected (PFC), multiple output product line features overvoltage and overcurrent protection. In addition to UL, CSA, and TÜV, regulatory agency compliances include the CE Marking and harmonic compliance to EN61000-3-2. FEATURES • Power Factor Correction (PFC) Meets EN61000-3-2 • Low-Profile Height Fits 1U Constraints • High 3.3V and 5V Current Capabilities Available • CE Marked to Low Voltage Directive • Autoranging AC Input, 85-264 VAC • Overvoltage Protection on the Main Output SINGLE OUTPUT MODEL SELECTION CHART – UP TO 72W CONVECTION COOLED, UP TO 100W FORCED AIR COOLED (300 LFM) MODEL MPB80-1012 MPB80-1024 MPB80-1048 OUTPUT VOLTAGE ADJUSTMENT RANGE CONVECTION COOLED OUTPUT CURRENT FORCED AIR OUTPUT CURRENT LINE REGULATION LOAD REGULATION RIPPLE & NOISE %p-p (NOTE 1) INITIAL SETTING ACCURACY 12V 24V 48V 11V to 13V 22V to 26V 46V to 50V 6A 3A 1.5A 8.4A 4.2A 2.1A 0.5% 0.5% 0.5% 1% 1% 1% 1% 1% 1% 11.94V to 12.06V 23.88V to 24.12V 47.76V to 48.24V NOTES: 1) Maximum peak-to-peak noise, bandwidth limited to 20 MHz. DUAL AND TRIPLE OUTPUT MODEL SELECTION CHART – UP TO 63W CONVECTION COOLED, UP TO 80W FORCED AIR COOLED (300 LFM) MODEL MPB80-2000 MPB80-3000 MPB80-3300 (Note 2) OUTPUT VOLTAGE ADJUSTMENT RANGE CONVECTION COOLED CURRENT FORCED AIR CURRENT LINE REGULATION TOTAL REGULATION RIPPLE & NOISE mV (NOTE 1) INITIAL SETTING ACCURACY +5V +12V +5V +12V -12V +3.3V +5V +12V 4.7V to 5.8V Fixed 4.7V to 5.8V Fixed Fixed 3.0V to 3.9V 4.7V to 5.8V Fixed 11A/15A PK 0.5A/1A PK 7A/8.5A PK 2.5A/3A PK 0.3A/0.7A PK 7A/8.5A PK 3A/5A PK 0.4A/0.65A PK 15A 1A 8.5A 3A 0.7A 8.5A 5A 0.65A 0.8% 0.5% 0.5% 1.5% 0.5% 0.7% 0.5% 1.5% -4%, +2% ±5% -4%, +6% -7%, +13% ±4% ±2% ±2% -15%, +17% 1% 1% 1% 1% 1% 1% 1% 1% 4.9V to 5.1V 11.5V to 12.5V 4.9V to 5.1V 11.5V to 12.5V -11.5V to -12.5V 3.27V to 3.33V 4.95V to 5.05V 10.2V to 14.0V NOTES: 1) Maximum peak-to-peak noise, bandwidth limited to 20 MHz. 2) MPB80-3300 has overvoltage protection on +3.3V and +5V outputs. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. Rev. 10/2000 1 MPB80 SERIES INPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION MIN Input Voltage - AC Input Frequency Brown Out Protection Hold-Up Time Autoranging AC input automatically adjusts, no manual strapping required. AC input. Lowest AC input voltage that regulation is maintained with full rated loads. After last AC line peak. Full load @ 120 VAC Full load @ 220 VAC Single Output Models, 120 VAC Single Output Models, 230 VAC Dual and Triple Output Models, 120 VAC Dual and Triple Output Models, 230 VAC Non-user serviceable internally located AC input line fuse. Internally limited by thermistor. Vin = 230 VAC (one cycle). Switching frequency of main transformer. 85 47 85 16 20 Input Current Input Protection Inrush Surge Current Operating Frequency NOM MAX UNITS 264 63 VAC Hz VAC mS 60 1.5 0.75 1.1 0.55 ARMS 32 68 APK kHz MAX UNITS OUTPUT SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION Efficiency Minimum Loads Full rated load, 230 VAC. Varies with distribution of loads among outputs. Single Output Models Minimum load required on V1 for regulation of V2, V3. MPB80-2000 All other Multiple Output Models Full load, 20 MHz bandwidth Convection cooled, continuous output power. MPB80-10XX MPB80-2000 MPB80-3000 MPB80-3300 Forced air cooled, 300 LFM, or convection cooled, peak MPB80-10XX output power 10% duty cycle, 30 seconds maximum. MPB80-2000 MPB80-3000 MPB80-3300 Output voltage overshoot/undershoot at turn-on. Varies by output. Total regulation includes: line changes from 85-132 VAC or 170-264 VAC, changes in load starting at 20% load and changing to 100% load. Recovery time, to within 1% of initial set point due to a 50-100% load change, 5% max. deviation. Time required for initial output voltage stabilization. Time required for output voltage to rise from 10% to 90%. Ripple and Noise Output Power Overshoot / Undershoot Regulation Transient Response Turn-On Delay Turn-On Rise Time MIN NOM 73 % 0.0 1.5 0.7 See Model Selection Chart 72 61 63 43 100 80 80 61 2 Amps Watts Watts % See Model Selection Chart 500 µS 2 20 Sec mS INTERFACE SIGNALS AND INTERNAL PROTECTION PARAMETER CONDITIONS/DESCRIPTION Overvoltage Protection +3.3V 3.9 4.7 +5V, V1 & V2 5.8 6.8 12V 17.3 20.2 24V 32.2 37.8 48V 55.2 64.8 Fully protected against output overload and short circuit. Automatic recovery upon removal of overload condition. Overload Protection MIN 2 NOM MAX UNITS V MPB80 SERIES SAFETY, REGULATORY, AND EMI SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION AC Input Harmonic Distortion Agency Approvals In compliance per EN61000-3-2. UL1950. CSA 22.2 No. 234/950. EN60950 (TÜV). Input to output, 1 second. FCC CFR title 47 Part 15. EN55022 / CISPR 22 EN61000-4-5 class 3. Input to output. Per EN60950, 264 VAC. Dielectric Withstand Voltage Electromagnetic Interference, Conducted Input Transient Protection Insulation Resistance Leakage Current MIN NOM MAX UNITS Approved 2600 B B 2 10 VDC Class 1.0 kV M mA MAX UNITS 10k 30k ASL Ft. 50 70 85 95 20 6 °C ENVIRONMENTAL SPECIFICATIONS PARAMETER CONDITIONS/DESCRIPTION Altitude Operating. Non-Operating. See model selection table for individual convection/forced air rating. At 100% load. Derate linearly above 50°C by 2% per °C. Cooling Operating Temperature Storage Temperature Relative Humidity Shock Vibration MIN Non-condensing. Peak acceleration. Random vibration, 10 Hz to 2 kHz, 3 axis. 3 0 0 -40 NOM °C % GPK GRMS MPB80 SERIES OVERALL SIZE: 5.00" x 3.00" x 1.40" (127.0mm x 76.2mm x 35.6mm) COMPONENT HEIGHT: 1.26" (32.0mm) WEIGHT: 0.8 LBS (0.36 kg) 0.156" DIA THRU (3.96mm) 4 PLACES 4.550" 0.225" (5.7mm) (115 .6mm) J2 J1 PIN 1 L Input Output N 3.00" (76.2mm) 2.550" (64.8mm) J3: 0.250 FASTON SAFETY EARTH GROUND 5.00" (127.0mm) 0.225" (5.7mm) J2 MPB80-2000 MPB80-3000 MPB80-3300 PIN 1 V1 PIN 1 V2 PIN 1 2 V1 2 V1 2 3 V1 3 V1 4 RTN 4 5 RTN 6 RTN 7 V2 V2 MPB80-10XX PIN 1 V1 RTN 2 V1 3 RTN 3 V1 RTN 4 RTN 4 RTN 5 RTN 5 V1 5 RTN 6 V3 6 V1 6 RTN 7 V3 7 NC INPUT CONNECTIONS, J1: MOLEX 26-60-4030 OR EQUIVALENT HEADER MATES WITH MOLEX HOUSING 09-50-3031 OR EQUIVALENT AND PINS 08-50-0106 (18-20 AWG) OR 08-50-0108 (22-26 AWG) OR EQUIVALENT. OUTPUT CONNECTIONS SIX CONNECTOR J2: MOLEX 26-60-4060 HEADER MATES WITH MOLEX 09-50-3061 OR EQUIVALENT AND PINS 08-50-0106 (18-20 AWG) OR 08-50-0108 (22-26 AWG) OR EQUIVALENT. SEVEN CONNECTOR J2: MOLEX 26-60-4070 HEADER MATES WITH MOLEX 09-50-3071 OR EQUIVALENT AND PINS 08-50-0106 (18-20 AWG) OR 08-50-0108 (22-26 AWG) OR EQUIVALENT. CHASSIS: 0.090" (2.3mm) ALUMINUM ALLOY, WITH CLEAR FINISH. 4