MVIH Series VCXO Hermetically Sealed Ceramic SMD Package +2.5VDC, +3.3VDC, or +5.0VDC Supply Voltage Tape and Reel Available RoHS Compliant Supply Voltage (Vdd) +2.5VDC ±10% Frequency Range Tristate ±10 ppm (See Part Number Guide for Options) (See Part Number Guide for Options) -40°C to +85°C 60mA max 60mA max 85mA max 15pF 30pF 30pF HCMOS 10% Vdd max 90% Vdd min 40%/60% 10nSec max 10mSec max 1.25 VDC ±1.00 VDC 1.65 VDC ±1.50 VDC 2.50 VDC ±2.00 VDC (See Part Number Guide for Options) (See Part Number Guide for Options) Logic “0” or Ground Osc Disabled High Impedance on Pin 4 Logic “1” (or no connect) Output Enabled Environmental & Mechanical Detail MIL-STD-883, Meth 2002, Cond B Solderability Vibration +5.0VDC ±10% 1.544MHZ TO 50.000MHZ 1.544MHZ TO 180.000MHZ Frequency Stability at +25°C Frequency Stability (Inclusive of Temp., Load, Voltage and Aging) Operating Temp.Range Storage Temp. Range Supply Current Load Output Logic “0” Logic “1” Symmetry (50% of waveform) Rise / Fall Time (10% to 90%) Start Time Control Voltage Linearity Pullability Shock +3.3DC ±10% MIL-STD-883, Meth 2003 MIL-STD-883, Meth 2007, Cond A Reflow Solderability 260°C for 10 seconds Gross Leak Test MIL-STD-883, Meth 1014, Cond C Fine Leak Test MIL-STD-883, Meth 1014, Cond A Marking Detail Line 1 = MXXXXX M = MMD XXXXX = Frequency in MHZ S = Internal Code YYWW = L = Line 2 = SYYWWL 4 Numerical Digit Date Code (Year / Week) Jan 27 2011=1105 Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Revisions only with customer approval 07/31/13 P Pg 1 of 2 Part Number Guide MVI Frequency H 5 x 7 Ceramic SM VCXO 6 Pads Supply Voltage Output H = HCMOS 2 = +2.5 VDC 3 = +3.3 VDC 5 = +5.0 VDC Frequency Stability 010 = ±10 ppm 025 = ±25 ppm 050 = ±50 ppm 100 = ±100 ppm Operating Temperature Blank = 0°C to +70°C 27 = -20°C to +70°C 48 = -40°C to +85°C Linearity Pullability D = ±50 ppm min P = ±80 ppm min C = ±100 ppm min Blank = ±20% max X = ±5% max Y = ±10% max Z = ±15% max Pin 2 & 5 Connection Blank = Pins 2 & 5 = N/C H = Pin 2-Tri-state, Pin 5-N/C R = Pin 2-N/C, Pin 5-Tri-state T = Pins 2 & 5 = Tri-state Packaging Blank = Bulk T = Tape and Reel Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details Tape & Reel Dimensions 4.00 PITCH 2.00 1.75 7.50 Tape Width B0 REEL DIA K0 A0 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 AO BO K0 PITCH TAPE WIDTH REEL DIA QTY PER REEL PIN 1 ORIENT. 1.85 [.073] 2.25 [.089] 0.95 [.037] 4.00 [.157] 12.00 [.471] 180 [7.0] 500 Q1 NOTES: UNLESS OTHERWISE SPECIFIED 1. Applicable Standards / Specifications ANSI Y14.5M, Dimensions and Tolerances EIA-481-B, 8 mm through 200mm Embossed Carrier Taping and 8 mm and 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling. 2. Dimensions are in millimeters [inch]. 3. Tolerances are ±0.1 [.004] mm unless otherwise specified. 4. Do not scale drawing. DIRECTION OF FEED MMD MONITOR/QUARTZEK – An ILSI Company, 5458 Louie Lane, Reno, NV 89511 Phone: (775) 851-8880, www.mmdcomp.com Revision: Revisions only with customer approval 07/31/13 P Pg 2 of 2