NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs General Description Features The NC7WZ17 is a dual buffer with Schmitt trigger inputs from Fairchild’s Ultra High Speed Series of TinyLogic® in the SC70 6-lead package. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. Schmitt trigger inputs typically achieve 1V hysteresis between the positive going and negative going input threshold voltage at 5V VCC. ■ Space saving SC70 6-lead package ■ Ultra small MicroPak™ Pb-Free leadless package ■ Ultra high speed: tPD 3.6ns Typ into 50pF at 5V VCC ■ High Output Drive: ±24mA at 3V VCC ■ Broad VCC operating range: 1.65V to 5.5V ■ Matches the performance of LCX when operated at 3.3V VCC ■ Power down high impedance inputs/outputs ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented Ordering Information Order Number Package Number Package Code Top Mark NC7WZ17P6X MAA06A Z17 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7WZ17P6X_NL(1) MAA06A Z17 Pb-Free 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3k Units on Tape and Reel NC7WZ17L6X MAC06A B5 Pb-Free 6-Lead MicroPak, 1.0mm Wide 5k Units on Tape and Reel Package Description Supplied As Pb-Free package per JEDEC J-STD-020B. Note: 1. “_NL” indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. Logic Symbol IEEE/IEC A1 1 A2 Y1 Y2 TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation NC7WZ17 Rev. 1.0.4 1 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs April 2006 Pin Descriptions Pin Assignment for SC70 A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 Pin Name Description A1, A2 Data Inputs Y1, Y2 Outputs Function Table Y=A (Top View) Pin One Orientation Diagram (Top View) Input Output A Y L L H H H = HIGH Logic Level AAA L = LOW Logic Level Pin One AAA represents Product Code Top Mark – see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak A1 1 6 Y1 GND 2 5 VCC A2 3 4 Y2 (Top Through View) 2 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Connection Diagrams Symbol Parameter Rating VCC Supply Voltage −0.5V to +7V VIN DC Input Voltage −0.5V to +7V VOUT DC Output Voltage −0.5V to +7V IIK DC Input Diode Current @ VIN < –0.5V IOK DC Output Diode Current @ VOUT < –0.5V −50mA IOUT DC Output Current ±50mA ICC/IGND DC VCC/GND Current ±100mA TSTG Storage Temperature −65°C to +150°C −50mA TJ Junction Temperature under Bias 150°C TL Junction Lead Temperature (Soldering, 10 seconds) 260°C PD Power Dissipation @ +85°C 180mW Recommended Operating Conditions(2) Symbol Parameter Rating VCC Supply Voltage Operating VCC Supply Voltage Data Retention 1.65V to 5.5V VIN Input Voltage 0V to 5.5V VOUT Output Voltage 0V to VCC TA Operating Temperature θJA Thermal Resistance 1.5V to 5.5V −40°C to +85°C 350°C/W Note: 2. Unused inputs must be held HIGH or LOW. They may not float. 3 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Absolute Maximum Ratings The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. TA = -40°C to +85°C +25°C Symbol VP VN VH VOH VOL Parameter Conditions VCC (V) Min Typ Max Min Max Units 1.65 0.6 1.0 1.4 0.6 1.4 V 1.8 0.7 1.07 1.5 0.7 1.5 2.3 1.0 1.38 1.8 1.0 1.8 3.0 1.3 1.74 2.2 1.3 2.2 4.5 1.9 2.43 3.1 1.9 3.1 5.5 2.2 2.88 3.6 2.2 3.6 1.65 0.2 0.5 0.8 0.2 0.8 1.8 0.25 0.56 0.9 0.25 0.9 2.3 0.40 0.75 1.15 0.40 1.15 3.0 0.6 0.98 1.5 0.6 1.5 4.5 1.0 1.42 2.0 1.0 2.0 5.5 1.2 1.68 2.3 1.2 2.3 1.65 0.1 0.48 0.9 0.1 0.9 1.8 0.15 0.51 1.0 0.15 1.0 2.3 0.25 0.62 1.1 0.25 1.1 3.0 0.4 0.76 1.2 0.4 1.2 4.5 0.6 1.01 1.5 0.6 1.5 5.5 0.7 1.20 1.7 0.7 1.7 1.65 1.55 1.65 1.55 1.8 1.7 1.8 1.7 2.3 2.2 2.3 2.2 3.0 2.9 3.0 2.9 4.5 4.4 4.5 4.4 IOH = -4mA 1.65 1.29 1.52 1.29 IOH = -8mA 2.3 1.9 2.14 1.9 IOH = -16mA 3.0 2.4 2.75 2.4 IOH = -24mA 3.0 2.3 2.62 2.3 IOH = -32mA 4.5 3.8 4.13 3.8 VIN = VIL IOL = 100µA 1.65 0.0 0.1 0.1 1.8 0.0 0.1 0.1 2.3 0.0 0.1 0.1 3.0 0.0 0.1 0.1 4.5 0.0 0.1 0.1 IOL = 4mA 1.65 0.08 0.24 0.24 IOL = 8mA 2.3 0.10 0.3 0.3 IOL = 16mA 3.0 0.16 0.4 0.4 IOL = 24mA 3.0 0.24 0.55 0.55 IOL = 32mA 4.5 0.25 0.55 0.55 Positive Threshold Voltage Netative Threshold Voltage Hystersis Voltage HIGH Level Output Voltage LOW Level Output Voltage VIN = VIH IOH = -100µA 4 NC7WZ17 Rev. 1.0.4 V V V V www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs DC Electrical Characteristics TA = -40°C to +85°C +25°C Symbol IIN Parameter Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current Conditions VCC (V) VIN = 5.5V, GND 0 to 5.5 VIN or VOUT = 5.5V VIN = 5.5V, GND Max Units ±0.1 ±1.0 µA 0.0 1 10 µA 1.65 to 5.5 1.0 10 µA 5 NC7WZ17 Rev. 1.0.4 Min Typ Max Min www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs DC Electrical Characteristics (Continued) TA = +25˚C Symbol Parameter Conditions tPLH, tPHL Propagation Delay CIN Input Capacitance CPD Power Dissipation Capacitance Min Typ Max Min Max 1.65 2.0 8.3 14.3 2.0 15.8 1.8 2.0 6.9 11.9 2.0 13.1 2.5 ± 0.2 1.5 4.8 8.2 1.5 9.0 3.3 ± 0.3 1.0 3.7 5.6 1.0 6.2 5.0 ± 0.5 0.8 3.0 4.7 0.8 5.2 3.3 ± 0.3 1.5 4.3 6.6 1.5 7.3 5.0 ± 0.5 1.0 3.6 5.6 1.0 6.2 CL = 15pF, RL = 1MΩ CL = 50pF, RL = 500Ω, –40°C to +85°C VCC (V) Note 3 Figure Units Number ns Figure 1 Figure 3 ns Figure 1 Figure 3 0 2.5 pF 3.3 10 pF 5.0 12 Figure 2 Notes: 3. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms VCC Input Output CL* RL tf = 3ns tr = 3ns *CL includes load and stray capacitance. Input PRR = 1.0MHz; tW = 500ns VCC 90% Input Figure 1. AC Test Circuit 90% 50% GND 10% 50% tW tPHL tPLH VCC 10% VOH A Output Input 50% 50% VOL Figure 3. AC Waveforms Input = AC Waveform; tr, tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 2. ICCD Test Circuit 6 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs AC Electrical Characteristics Tape Format for SC70 Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status P6X Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension inches (millimeters) Package Tape Size Dim A Dim B SC70-6 8mm 0.093 (2.35) 0.096 (2.45) Dim F 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 7 NC7WZ17 Rev. 1.0.4 Dim KO Dim P1 Dim W 0.157 (4) 0.315 ± 0.004 (8 ± 0.1) www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Tape and Reel Specification Reel Dimension for MicroPak inches (millimeters) Tape Size A B C D N W1 W2 W3 8 mm 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) 0.567 (14.40) W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Tape and Reel Specification (Continued) Tape Format for MicroPak Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status L6X Leader (Start End) 125 (typ) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension inches (millimeters) 9 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Tape and Reel Specification (Continued) NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A 10 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 11 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 12 NC7WZ17 Rev. 1.0.4 www.fairchildsemi.com NC7WZ17 TinyLogic® UHS Dual Buffer with Schmitt Trigger Inputs TRADEMARKS