NON−POLAR ALUMINUM ELECTROLYTIC NPR, NPA (Non−Polarized) SERIES SUBMINIATURE N0N−POLARIZED (NPR: Radial Leads, NPA: Axial Leads) MECHANICAL SPECIFICATIONS Lead Solderability: The NPR and NPA Series subminiature aluminum electrolytic capacitors are especially designed for use in circuits whose polarity is reversed or unknown or in crossover networks which do not require tough characteristic requirements. RATINGS Meets the requirements of MIL−STD 202, Method 208 Marking: Consists of series type, nominal capacitance, rated voltage, temperature range, anode and/or cathode identification, vendor identification. Recommended Cleaning Solvents: Capacitance Range: 0.47μf to 1000μf Tolerance: ±20% Voltage Range: 16V to 100V Methanol, isopropanol ethanol, isobutanol, petroleum ether, propanol and/or commercial detergents. Halogenated hydrocarbon cleaning agents such as Freon (MF, TF, or TC), trichloroethylene, trichloroethane, or methylchloride are not recommended as they may damage the capacitor. PERFORMANCE SPECIFICATIONS Operating Temperature Range: −40°C to +85°C (−40°F to +185°F) Leakage Current: I ≤ 0.002CV + 3μA (measured after 5 minutes of applied voltage) I = Leakage Current (μA) C = Nominal Capacitance (μf) V = Rated Voltage (V) CASE SIZES AND DIMENSIONS: NPR SERIES Capacitance Tolerance (M): ±20% measured at 20°C (68°F), 120Hz Dissipation Factor: measured at +20°C (+68°F),120HZ Rated Voltage 16 25 50 63 100 0.1μf to 1000μf 0.16 0.12 0.08 0.06 0.06 Impedance Ratio at Low Temperature: 120HZ Insulating Sleeve 18.0 Min 16 25 50 63 100 Z @ −25°C (−13°F)/ Z @ +20°C (+68°F) 2 1.5 1.5 2 2 Z @ −40°C (−40°F)/ Z @ +20°C (+68°F) 3 2 2 4 4 16 25 50 63 100 DØ L L’ D’ Ø = D Ø + 0.5 Max Comparison Z WV A ±0.5 dØ 5.0 Min D’ Ø L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0 NPA SERIES Surge Voltage: DC Rated Voltage Surge Voltage 20 32 63 79 125 L Insulating Sleeve dØ Load Life: 1000 ±12Hrs @ +85°C (+185°F), at rated voltage Leakage Current: Within values specified above Dissipation Factor: Within ±150% of specified value Capacitance Change Max: ±15% of initial value Rated Voltage Capacitance Change Max 160V to 450V Within 30% of the initial value Shelf Life: 1000 Hrs @ +85°C (+185°F), no voltage applied Leakage Current: Within values specified above Dissipation Factor: Within ±150% of specified value Capacitance Change Max: Within ±15% of initial value 2.3 Max DØ 35.0 Min D’ Ø = D Ø + 0.5 Max L’ 35.0 Min L’ = L + 1.0 Max at D Ø ≤ 8.0 D’ Ø L’ = L + 2.0 Max at D Ø ≥ 10.0 ORDERING INFORMATION NPR 47 M 50 Series Capacitance Tolerance Voltage NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com 7 NON−POLAR ALUMINUM ELECTROLYTIC NPR, NPA (Non−Polarized) SERIES NPR Series (Radial Type) Dimensions: Diameter (D Ø) x Length (L): mm Rated Voltage Cap (μf) (WV) 16 25 50 63 100 Surge Voltage (V) 20 32 63 79 125 0.47 5 x 11 1.0 5 x 11 5 x 11 5 x 11 2.2 5 x 11 5 x 11 6 x 11 3.3 5 x 11 6 x 11 8 x 11.5 4.7 5 x 11 5 x 11 6 x 11 6 x 11 10 5 x 11 5 x 11 8 x 11.5 8 x 11.5 8 x 11.5 22 6 x 11 6 x 11 10 x 12.5 10 x 12.5 10 x 20 33 6 x 11 47 8 x 11.5 100 10 x 12.5 8 x 11.5 10 x 16 10 x 16 13 x 20 10 x 12.5 10 x 20 10 x 20 13 x 25 10 x 12.5 10 x 16 13 x 25 13 x 25 16 x 25 220 10 x 20 13 x 25 16 x 25 16 x 30 330 13 x 20 13 x 25 16 x 30.5 470 13 x 25 16 x 25 1000 16 x 25 16 x 30.5 * These dimensions are for reference only, please consult the factory for actual size. NPR Series (Radial Type) Mechanical Specifications: mm Outside Diameter (D Ø) 5 6 8 10 13 16 Lead Spacing (A) 2 2.5 3.5 5 5 7.5 0.5 0.6 0.6 0.6 0.6 0.8 Lead Diameter (d Ø) * These dimensions are for reference only, please consult the factory for actual size. NPA Series (Axial Type) Dimensions: Diameter (D Ø) x Length (L): mm Rated Voltage Cap (μf) (WV) 16 25 50 63 100 Surge Voltage (V) 20 32 63 79 125 0.47 6 x 15 1.0 6 x 15 6 x 15 6 x 15 2.2 6 x 15 6 x 15 6 x 15 3.3 6 x 15 6 x 15 6 x 19 4.7 6 x 15 6 x 15 8 x 19 10 6 x 15 6 x 15 6 x 19 8 x 19 10 x 21 22 6 x 15 6 x 19 10 x 21 10 x 21 10 x 25 33 6 x 19 8 x 19 10 x 21 10 x 25 13 x 30 47 8 x 19 8 x 19 10 x 25 10 x 25 13 x 30 100 10 x 21 10 x 25 13 x 30 13 x 30 16 x 30 220 10 x 25 13 x 30 16 x 30 16 x 30 330 10 x 30 13 x 30 16 x 41 16 x 41 470 13 x 30 16 x 30 1000 16 x 30 * These dimensions are for reference only, please consult the factory for actual size. NPA Series (Axial Type) Mechanical Specifications: mm Outside Diameter (D Ø) Lead Diameter (d Ø) 6 8 10 13 16 0.6 0.6 0.6 0.8 0.8 * These dimensions are for reference only, please consult the factory for actual size. 8 NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com