2SA1943 TOSHIBA Transistor Silicon PNP Triple Diffused Type 2SA1943 Power Amplifier Applications Unit: mm • High collector voltage: VCEO = −230 V (min) • Complementary to 2SC5200 • Recommended for 100-W high-fidelity audio frequency amplifier output stage. Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −230 V Collector-emitter voltage VCEO −230 V Emitter-base voltage VEBO −5 V Collector current IC −15 A Base current IB −1.5 A PC 150 W Tj 150 °C Tstg −55 to 150 °C Collector power dissipation (Tc = 25°C) Junction temperature Storage temperature range JEDEC ― JEITA ― TOSHIBA 2-21F1A Weight: 9.75 g (typ.) Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = −230 V, IE = 0 ― ― −5.0 µA Emitter cut-off current IEBO VEB = −5 V, IC = 0 ― ― −5.0 µA V (BR) CEO IC = −50 mA, IB = 0 −230 ― ― V VCE = −5 V, IC = −1 A 55 ― 160 hFE (2) VCE = −5 V, IC = −7 A 35 60 ― VCE (sat) IC = −8 A, IB = −0.8 A ― −1.5 −3.0 Base-emitter voltage VBE VCE = −5 V, IC = −7 A ― −1.0 −1.5 V Transition frequency fT VCE = −5 V, IC = −1 A ― 30 ― MHz VCB = −10 V, IE = 0, f = 1 MHz ― 360 ― pF Collector-emitter breakdown voltage hFE (1) DC current gain (Note) Collector-emitter saturation voltage Collector output capacitance Note: hFE (1) classification Cob V R: 55 to 110, O: 80 to 160 1 2004-07-07 2SA1943 Marking Part No. (or abbreviation code) TOSHIBA 2SA1943 Lot No. JAPAN A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2004-07-07 2SA1943 IC – VCE IC – VBE −20 −20 Common emitter VCE = −5 V −250 −12 IC (A) −800 −600 −400 −16 −200 Collector current Collector current IC (A) Common emitter Tc = 25°C −150 −100 −8 IB = −10 mA −50 −40 −30 −20 −4 −16 −12 −8 25 Tc = 100°C −4 −25 0 0 −2 −4 −6 Collector-emitter voltage −8 VCE 0 0 −10 −0.4 (V) −0.8 Base-emitter voltage hFE −3 DC current gain −1 −0.3 −25 −0.1 25 IC/IB = 10 −0.1 −1 −10 300 VBE −2.0 (V) Tc = 100°C 100 25 30 −25 10 Common emitter VCE = −5 V 3 −0.01 Common emitter −0.1 −1 −100 −10 Collector current IC (A) −100 Collector current IC (A) Safe Operating Area −50 −30 IC max (pulsed)* 1 ms* IC max (continuous) 10 ms* −10 IC (A) −0.001 −0.01 −1.6 hFE – IC Collector current Collector-emitter saturation voltage VCE (sat) (V) VCE (sat) – IC Tc = 100°C −1.2 100 ms* −5 −3 DC operation Tc = 25°C −1 −0.5 −0.3 *: Single nonrepetitive pulse Tc = 25°C −0.1 Curves must be derated linearly with increase in −0.05 temperature. −0.03 −2 −10 −30 VCEO max −100 Collector-emitter voltage 3 −300 VCE −1000 (V) 2004-07-07 2SA1943 rth – tw Transient thermal resistance rth (°C/W) 10 Infinite heat sink 1 0.1 Curves should be applied in thermal limited area. (single nonrepetitive pulse) 0.01 0.001 0.01 0.1 1 10 Pulse width 4 tw 100 1000 (s) 2004-07-07 2SA1943 RESTRICTIONS ON PRODUCT USE 030619EAA • The information contained herein is subject to change without notice. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 5 2004-07-07