ETC NUF2101W1T1-D

NUF2101W1T1
Advance Information
USB Filter with ESD
Protection
This device is designed for applications requiring Line
Termination, EMI Filtering and ESD Protection. It is intended for
use in downstream USB 1.1 ports, Cellular phones, Wireless
equipment and computer applications. This device offers an integrated
solution in a small package (SC-88, Case 419B) reducing PCB space
and cost.
Features:
• Provides USB Line Termination, Filtering and ESD Protection
• Single IC Offers Cost Savings by Replacing 4 Resistors,
•
•
•
2 Capacitors, and 5 TVs diodes
Bi-directional EMI Filtering Prevents Noise from Entering/Leaving
the System
IEC61000-4-2 ESD Protection for USB Port
ESD Ratings: Machine Model = C
ESD Ratings: Human Body Model = 3B
http://onsemi.com
SCHEMATIC
RS
D+OUT
D+IN
1
6
15 k
VBUS
2
5
15 k
D- IN
D- OUT
4
3
Benefits:
• SC-88 Package Minimizes PCB Space
• Integrated Circuit Increases System Reliability versus Discrete
•
Component Implementation
TVs Devices Provide ESD Protection That is Better than a Discrete
Implementation because the Small IC minimizes Parasitic
Inductances
D+OUT
PD
225
mW
GND
TJ(max)
125
°C
Operating Temperature Range
TJ
-55 to +125
°C
Storage Temperature Range
Tstg
-55 to +125
°C
Lead Solder Temperature
(10 second duration)
TL
260
°C
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
 Semiconductor Components Industries, LLC, 2003
1
2
3
D- OUT
TBD
d
TBD d
Unit
February, 2003 - Rev. 0
6
1
Value
Maximum Junction Temperature
3
PINOUT AND MARKING DIAGRAM
Symbol
Steady State Power
2
SC-88
CASE 419B
PLASTIC
MAXIMUM RATINGS (TA = 25°C)
Rating
4
1
Typical Applications:
• USB Hubs
• Computer Motherboards
5
6
5
4
D+IN
VBUS
D- IN
= Specific Device Code
= Date Code
ORDERING INFORMATION
Device
Package
Shipping
NUF2101W1T1
SC-88
3000/Tape & Reel
Publication Order Number:
NUF2101W1T1/D
NUF2101W1T1
ELECTRICAL CHARACTERISTICS (TA = 25°C)
Device
Device
Marking
VRWM
(Volts)
Min
Max
Max IR
@ VRWM
= 5.25 V
VBUS to
GND
(A)
NUF2101W1T1
TBD
5.25
6.0
8.0
5.0
VBR @
1 mA
(Volts)
Pull-down
Resistor
Rpd (k)
Max IR
@ VRWM
= 3.3 V
VBUS Pin
(A)
Typical Line
Capacitance
(pF)
(Notes 2, 3)
Min
Nom
Max
Min
Nom
Max
1.0
50
27
30
33
13.5
15
16.5
Series Resistor
RS () (Note 1)
1. For other RS values (i.e. RS = 30 ) contact your local ON Semiconductor sales representative.
2. Measured at 25°C, VR = 0 V, f = 1 MHz, Pins 2, 3, 4 or 5 to GND with Pin 1 also grounded.
3. For other capacitance values contact your local ON Semiconductor sales representative.
TYPICAL CHARACTERISTICS
10
50
0
40
-10
-20
30
P = -25 dBm
Vdc = 0 V
10
(dB)
(dB)
-30
-40
0
-50
-10
-60
-20
-70
-30
-80
-40
-90
P = -25 dBm
Vdc = 0 V
20
0.1
1
10
(MHz)
100
-50
1000
Figure 1. Analog Cross-talk (D+ to D-)
0.1
1
10
(MHz)
100
Figure 2. Insertion Loss Characteristics
http://onsemi.com
2
1000
NUF2101W1T1
OUTLINE DIMENSIONS
USB Filter with ESD Protection
SC-88
CASE 419B-02
ISSUE N
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419B-01 OBSOLETE, NEW STANDARD
419B-02.
A
G
6
5
4
1
2
3
DIM
A
B
C
D
G
H
J
K
N
S
-B-
S
D 6 PL
0.2 (0.008)
M
B
M
N
J
C
H
K
http://onsemi.com
3
INCHES
MIN
MAX
0.071 0.087
0.045 0.053
0.031 0.043
0.004 0.012
0.026 BSC
--0.004
0.004 0.010
0.004 0.012
0.008 REF
0.079 0.087
MILLIMETERS
MIN
MAX
1.80
2.20
1.15
1.35
0.80
1.10
0.10
0.30
0.65 BSC
--0.10
0.10
0.25
0.10
0.30
0.20 REF
2.00
2.20
NUF2101W1T1
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
JAPAN: ON Semiconductor, Japan Customer Focus Center
2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051
Phone: 81-3-5773-3850
Email: [email protected]
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800-282-9855 Toll Free USA/Canada
http://onsemi.com
4
NUF2101W1T1/D