2SC3307 TOSHIBA Transistor Silicon NPN Triple Diffused Type 2SC3307 Industrial Applications High-Speed and High-Voltage Switching Applications Switching Regulator Applications High-Speed DC-DC Converter Applications • Excellent switching times: tr = 1.0 μs (max), tf = 1.0 μs (max) • High collector breakdown voltage: VCEO = 800 V Unit: mm (IC = 5 A) Absolute Maximum Ratings (Tc = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 900 V Collector-emitter voltage VCEO 800 V Emitter-base voltage VEBO 7 V DC IC 10 Pulse ICP 15 IB 3 A PC 150 W Tj 150 °C Tstg −55 to 150 °C Collector current Base current Collector power dissipation (Tc = 25°C) Junction temperature Storage temperature range A JEDEC ― JEITA ― TOSHIBA 2-21F1A Weight: 9.75 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 1 2006-11-09 2SC3307 Electrical Characteristics (Tc = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 800 V, IE = 0 ― ― 100 μA Emitter cut-off current IEBO VEB = 7 V, IC = 0 ― ― 1 mA Collector-base breakdown voltage V (BR) CEO IC = 1 mA, IE = 0 900 ― ― V Collector-emitter breakdown voltage V (BR) CEO V DC current gain IC = 10 mA, IB = 0 800 ― ― hFE (1) VCE = 5 V, IC = 10 mA 10 ― ― hFE (2) VCE = 5 V, IC = 5 A 10 ― ― Collector-emitter saturation voltage VCE (sat) IC = 5 A, IB = 1 A ― ― 1.0 V Base-emitter saturation voltage VBE (sat) IC = 5 A, IB = 1 A ― ― 1.5 V ― ― 1.0 ― ― 3.0 ― ― 1.0 tr Storage time tstg IB2 Switching time Input IB1 20 μs IB1 IB2 IC = 1 A Output 400 Ω Rise time μs VCC ≈ 400 V Fall time tf IB1 = −IB2 = 0.4 A, duty cycle ≤ 1% Marking Part No. (or abbreviation code) TOSHIBA 2SC3307 Lot No. JAPAN A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-09 2SC3307 IC – VCE hFE – IC 12 Common emitter 2 10 VCE = 5 V DC current gain hFE 1.4 1.2 1.0 0.8 8 0.6 6 0.4 4 100 50 Tc = 100°C 30 25 10 −55 5 3 0.2 IB = 0.1 A 1 2 0.003 0.01 2 4 6 8 Collector-emitter voltage 0.03 0.3 Tc = 100°C 0.1 0.01 −55 0.03 0.1 0.3 1 Collector current IC 3 10 Base-emitter saturation voltage VBE (sat) (V) 0.5 0.003 3 Tc = −55°C 1 0.5 0.3 100 25 0.1 0.05 0.03 (A) 0.003 0.01 IC – VBE 0.03 0.1 0.3 1 3 10 (A) Switching Characteristics 30 10 IC = 10IB1 Common emitter IB1 = −IB2 VCE = 5 V 10 8 Switching time (μs) (A) (A) Common emitter IC/IB = 5 5 Collector current IC Collector current IC 10 VBE (sat) – IC 10 Common emitter IC/IB = 5 1 0.02 3 1 10 VCE (sat) – IC 25 0.3 VCE (V) 3 0.05 0.1 Collector current IC 0 0 0 Collector-emitter saturation voltage VCE (sat) (V) Common emitter 300 Tc = 25°C 1.6 (A) Collector current IC 500 6 Ta = 100°C 4 25 2 Pulse width = 20 μs Duty cycle ≤ 1% 5 Tc = 100°C 3 tstg 25 1 tr 100 tf 0.5 0.3 −55 25 0 0 0.2 0.4 0.6 0.8 Base-emitter voltage 1.0 1.2 0.1 0 1.4 VBE (V) 2 4 6 Collector current IC 3 8 10 (A) 2006-11-09 2SC3307 rth – tw 100 Transient thermal resistance rth (°C/W) Curves should be applied to the thermally limited 30 (2) region. (single nonrepetitive pulse) (1) Infinite heat sink (2) No heat sink 10 3 (1) 1 0.3 0.1 0.03 0.001 0.01 0.1 1 Pulse width 10 tw 100 1000 (s) Safe Operating Area 30 IC max (pulsed)* 10 μs* 100 μs* 10 3 500 μs* 1 ms* Collector current IC (A) IC max 5 (continuous) 1 3 10 ms* 0.5 30 ms* 0.3 100 ms* 0.1 *: Single nonrepetitive pulse 0.05 0.03 Tc = 25°C Curves must be derated DC operation Tc = 25°C linearly with increase in temperature. 0.01 3 10 VCEO max 30 100 300 1000 Collector-emitter voltage VCE (V) 4 2006-11-09 2SC3307 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-09