SHIELDED RADIAL INDUCTOR P11RS2875 SERIES • RoHS Compliant Product • Ferrite shielded inductor • Lp tested at 1KHz, 1.0VRMS • Inductance Tolerance: M = ±20% • IDC: 10% inductance drop typical from initial value • IRMS: ∆T ≤ 40°C Temp Rise at rated current • Operating Temperature: -40°C to +85°C ELECTRICAL SPECIFICATION @ 25°C PART NO P11RS2875100M 120M 150M 180M 220M 270M 330M 390M 470M 560M 680M 820M 101M 121M 151M 181M 221M 271M 331M 391M 471M 561M 681M 821M 102M 122M 152M 182M 222M 272M 332M 392M 472M 562M 682M 822M 103M Mechanical Lp ±20% (µH) DCR Max (W) RATED IDC (A) RATED IRMS (A) 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 0.047 0.055 0.068 0.083 0.097 0.130 0.140 0.170 0.210 0.230 0.280 0.400 0.450 0.50 0.63 0.68 0.91 1.00 1.20 1.30 1.70 2.10 2.30 3.10 3.90 4.30 5.80 7.10 7.9 11.0 12.0 16.1 18.1 25.4 28.8 41.8 46.8 3.60 3.20 2.96 2.72 2.48 2.08 2.00 1.68 1.60 1.44 1.36 1.28 1.12 1.04 0.96 0.88 0.75 0.70 0.65 0.56 0.53 0.42 0.41 0.38 0.35 0.33 0.27 0.26 0.24 0.20 0.18 0.17 0.16 0.14 0.13 0.12 0.11 2.95 2.70 2.25 2.10 2.00 1.75 1.70 1.50 1.32 1.11 1.00 0.92 0.84 0.80 0.72 0.70 0.53 0.51 0.44 0.42 0.37 0.33 0.31 0.28 0.24 0.22 0.18 0.17 0.16 0.14 0.13 0.12 0.11 0.10 0.09 0.08 0.07 DIM A B C E F Schematic Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.010 .XXX : ±0.003 mm: X,X : ± 0,254 X,XX : ±0,076 Product performance is limited to specified parameter. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 mm 8,3 Max 7,5 Max 5,0 ± 1,0 min 5,0 ± 0,5 0,60 Tel: (310) 325-1043 Fax: (310) 325-1044 P11RS2875-XXX 0709JW www.mpsind.com [email protected]