THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0723 P701 312.5 MHZ 3.3V 5 x 7mm SURFACE MOUNT HIGH FREQUENCY LVPECL CLOCK OSCILLATOR P701 ABSOLUTE MAXIMUM RATINGS PARAMETER TABLE 1.0 UNITS MINIMUM NOMINAL MAXIMUM UNITS -40 - 85 °C Storage Temperature Supply Voltage (Vcc) -0.5 - 4.6 Vdc Input Voltage (Vcc) -0.5 - Vcc+0.5 Vdc MINIMUM 250 -50 0 NOMINAL - MAXIMUM 800 50 70 UNITS MHz ppm °C Vdc OPERATING SPECIFICATIONS NOTE TABLE 2.0 PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range (Fo) NOTE 1 Supply Voltage (Vcc) 3.135 3.3 3.465 Supply Current (Icc) - 60 100 mA Jitter (BW=10Hz to 20MHz) - - 8 pS RMS Jitter (BW=12kHz to 20MHz) - - 2 pS RMS MINIMUM NOMINAL MAXIMUM UNITS NOTE 1.68 Vdc 2 - Vdc 2 INPUT CHARACTERISTICS TABLE 3.0 PARAMETER Disable Input Voltage (Low) (Vil) - Enable Input Voltage (High) (Vih) 2.275 - MINIMUM NOMINAL MAXIMUM UNITS NOTE 2.275 45 50 50 1.68 55 Ohms Vdc Vdc % 3 Rise / Fall Time 20% to 80% - - 0.5 ns 5 Rise / Fall Time 20% to 80% - - 0.4 ns 6 LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) (Voh) (Vol) Duty Cycle TABLE 4.0 DESCRIPTION The Connor Winfield P701 is a Fixed Frequency, Surface Mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a ±50ppm, 0 to 70°C overall stability, LVPECL Differential Outputs and Tri-state Enable / Disable function. The P701 is designed using a 2X or 4X PLL multiplication to achieve the high frequency output. FEATURES 250 to 800 MHz 3.3V OPERATION LOW JITTER <1pS RMS 4 OVERALL FREQUENCY TOLERANCE: +/-50 PPM TEMPERATURE RANGE: 0 to 70°C PACKAGE CHARACTERISTICS TABLE 5.0 Hermetically sealed ceramic package and metal cover. Package Pin 1 2 3 4 5 6 TABLE 6.0 Connection Enable / Disable N/C Ground Q Output Q Output Vcc Enable / Disable Function (Pad 1) High or Open Low TABLE 7.0 Output Enable Disable (High Impedance) DIFFERENTIAL LVPECL OUTPUTS ENABLE / DISABLE FUNCTION SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE Notes 1) Includes calibration @ 25°C, frequency stability vs. temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the outputs are at High Impedance. Output is enabled with no connection on pad 1. 3) Output must be terminated into 50 ohms to Vcc – 2V or Thevenin equivalent. 4) Duty Cycle measured at 50% of output swing. 5) Rise and fall times measured 20% to 80% of the total output voltage swing. 6) Rise and fall times measured 20% to 80% of the LVPECL levels 1.68V to 2.275V. ORDERING INFORMATION P701 LVPECL CLOCK SERIES - 312.5M CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Ec215 PAGE 1 OF 2 REV: 03 DATE: 10/11/07 aCopyright 2007 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D ATA SHEET CRYSTAL CONTROLLED OSCILLATORS SUGGESTED PAD LAYOUT PACKAGE LAYOUT 7 MAX 0 CW MAX 0722 P701 312.5 MHZ .070 MAX (1.8mm) SOLDER PROFILE OUTPUT WAVEFORM Temperature 260°C 260°C Duty Cycle 220°C Q 180°C 150°C 80% 50% 120°C 20% Q 0 tr 120 S Max. tf 10 S Time 60 S Max. 360 Sec. Max. TEST CIRCUIT 2 E/D N/C Vcc1 = Vcc2 = 3.3Vdc Specifications subject to change without notice. DATA SHEET #: Ec215 PAGE 2 OF 2 REV: 03 DATE: 10/11/07 aCopyright 2007 Connor-Winfield all rights reserved.