RoHS Power Chip Shielded Inductors Dimensions: Inches (mm) Inductance (µh) Tolerance (%) Test Freq. KHz,1V DCR (Ω) PCS125-3R3M-RC 3.3 20 1 .015 8.0 PCS125-4R7M-RC 4.7 20 1 .018 7.6 PCS125-100M-RC 10 20 1 .025 4.0 PCS125-120M-RC 12 20 1 .027 3.5 PCS125-150M-RC 15 20 1 .030 3.3 PCS125-180M-RC 18 20 1 .034 3.0 PCS125-220M-RC Allied Part Number IDC Current (A) 22 20 1 .036 2.8 PCS125-270M-RC 27 20 1 .051 2.3 PCS125-330M-RC 33 20 1 .057 2.1 PCS125-390M-RC 39 20 1 .068 2.0 PCS125-470M-RC 47 20 1 .075 1.8 PCS125-560M-RC 56 20 1 .110 1.7 PCS125-680M-RC 68 20 1 .120 1.5 PCS125-820M-RC 82 20 1 .140 1.4 PCS125-101M-RC 100 20 1 .160 1.3 PCS125-121M-RC 120 20 1 .170 1.1 150 20 20 1 .230 1.0 1 .290 0.9 1 .400 0.8 1 .460 .75 PCS125-151M-RC PCS125-181M-RC 180 PCS125-221M-RC 220 PCS125-271M-RC 270 20 20 PCS125-331M-RC 330 20 1 .510 .68 PCS125-391M-RC 390 20 1 .690 .65 PCS125-471M-RC 470 20 1 .770 .58 PCS125-561M-RC 560 20 1 .860 .54 PCS125-681M-RC 680 20 1 1.20 .48 PCS125-821M-RC 820 20 1 1.34 .43 1.53 0.4 PCS125-102M-RC 1000 20 1 PCS125 Features • Magnetically Shielded • Low DC Resistance • High Energy Storage • Low Energy Loss • Suitable for pick and place Electrical Inductance Range: 3.3µ to 1000µh Tolerance: 20% over entire range Available in tighter tolerances Test Frequency: 1KHz, 1V Operating Temp: -40ºC ~ 85ºC IDC: Inductance Drop 35% Typ. at rated IDC. Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Test Equipment (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502 (IDC): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A Physical Packaging: 600 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED15 5/28/09 www.alliedcomponents.com