Solid State Relay OCMOS FET PS7141E-1A,PS7141EL-1A 6-PIN DIP, 400V BREAK DOWN VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7141E-1A and PS7141EL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7141EL-1A has a surface mount type lead. FEATURES • 1 channel type (1 a output) • Designed for AC/DC switching line changer • Small package (6-pin DIP) • Low offset voltage • PS7141EL-1A: Surface mount type • Ordering number of taping product: PS7141EL-1A-E3, E4 • Safety standards • UL approved: File No. E72422 • BSI approved: No. 8806/8807 APPLICATIONS • Exchange equipment • Measurement equipment • FA/OA equipment Document No. PN10439EJ01V0DS (1st edition) Date Published October 2003 CP(K) PS7141E-1A,PS7141EL-1A PACKAGE DIMENSIONS (in millimeters) PS7141E-1A 9.25±0.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 7.62 3.5±0.3 3.3±0.3 4.15±0.3 6.5±0.5 0.5±0.1 1.34±0.1 0.25 M 0 to 15˚ 2.54 PS7141EL-1A 9.25±0.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 3.5±0.3 0.10+0.10 –0.05 6.5±0.5 1.34±0.1 0.25 M 2 0.9±0.25 2.54 9.60±0.4 Data Sheet PN10439EJ01V0DS PS7141E-1A,PS7141EL-1A MARKING EXAMPLE No.1 pin mark PS7141E-1A Country Assembled Type Number Assembly lot Week assembled Year assembled (Last 1 Digit) In-house Code Rank Code Data Sheet PN10439EJ01V0DS 3 PS7141E-1A,PS7141EL-1A ORDERING INFORMATION (Solder Contains Lead) Part Number PS7141E-1A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7141EL-1A Application Part Number *1 PS7141E-1A PS7141EL-1A PS7141EL-1A-E3 Embossed Tape 1 000 pcs/reel PS7141EL-1A-E4 *1 For the application of the Safety Standard, following part number should be used. ORDERING INFORMATION (Pb-Free) Part Number PS7141E-1A-A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7141EL-1A-A PS7141EL-1A-E3-A Application Part Number PS7141E-1A PS7141EL-1A Embossed Tape 1 000 pcs/reel PS7141EL-1A-E4-A *1 For the application of the Safety Standard, following part number should be used. 4 Data Sheet PN10439EJ01V0DS *1 PS7141E-1A,PS7141EL-1A ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 400 V IL 120 mA Power Dissipation Peak Forward Current MOS FET *1 Break Down Voltage Continuous Load Current Connection A *2 Pulse Load Current Connection B 150 Connection C 250 *3 ILP 240 mA PD 560 mW BV 1 500 Vr.m.s. Total Power Dissipation PT 610 mW Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −40 to +100 °C (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 µs, Duty Cycle = 1% *2 Conditions: IF ≥ 5 mA. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) – 4 6 5 4 6 5 IL IL L L IL + IL 4 – + VL (DC) + VL (DC) – IL *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output Data Sheet PN10439EJ01V0DS 5 PS7141E-1A,PS7141EL-1A RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 5 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25°C) Parameter Diode MOS FET Symbol Conditions Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage ILoff VD = 400 V Output Capacitance Cout VD = 0 V, f = 1 MHz LED On-state Current IFon IL = 120 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 µA 1.0 µA 0.01 Current Coupled 36 pF 5.0 mA 36 50 Ω Ron2 IF = 10 mA, IL = 120 mA, t ≤ 10 ms 25 35 Turn-on Time *1, 2 ton IF = 10 mA, VO = 5 V, RL = 1.5 kΩ, 0.5 1.0 Turn-off Time *1, 2 toff PW ≥ 10 ms 0.07 0.2 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz 10 ms Ω 9 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton toff *2 The turn-on time and turn-off time are specified as input-pulse width ≥ 10 ms. Be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase. 6 Data Sheet PN10439EJ01V0DS PS7141E-1A,PS7141EL-1A TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 –25 0 25 75 85 50 200 120 100 0 –25 100 0 25 75 85 50 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 1.8 100 200 1.6 1.4 Output Capacitance Cout (pF) Forward Voltage VF (V) f = 1 MHz IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 1.2 1.0 0.8 –25 0 25 50 75 150 100 50 0 100 20 40 80 100 120 Ambient Temperature TA (˚C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10–6 200 IF = 10 mA TA = 85˚C 10–7 Load Current IL (mA) Off-state Leakage Current ILoff (A) 60 10–8 25˚C 10–9 10–10 0 100 200 300 400 100 –4.0 500 –2.0 0 2.0 4.0 –100 –200 Load Voltage VL (V) Applied Voltage VD (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10439EJ01V0DS 7 PS7141E-1A,PS7141EL-1A ON-STATE RESISTANCE DISTRIBUTION ON-STATE RESISTANCE DISTRIBUTION 30 30 n = 50 pcs, IF = 10 mA, IL = 10 mA 20 25 Number (pcs) Number (pcs) 25 15 10 n = 50 pcs, IF = 10 mA, IL = 120 mA 5 20 15 10 5 0 36 35 0 38 37 24 26 25 On-state Resistance Ron1 (Ω) On-state Resistance Ron2 (Ω) ON-STATE RESISTANCE vs. LOAD CURRENT ON-STATE RESISTANCE vs. FORWARD CURRENT 40 40 IF = 10 mA On-state Resistance Ron (Ω) On-state Resistance Ron (Ω) IL = 10 mA 35 30 25 20 0 20 40 60 80 100 120 35 30 120 mA 25 20 0 140 2 4 6 8 TURN-ON TIME DISTRIBUTION TURN-ON TIME vs. FORWARD CURRENT 12 30 n = 50 pcs, IF = 10 mA, VO = 5 V 10 25 8 20 Number (pcs) Turn-on Time ton (ms) VO = 5 V 6 4 15 10 5 2 5 10 15 20 25 30 0 0.4 0.5 Turn-on Time ton (ms) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 8 12 Forward Current IF (mA) Load Current IL (mA) 0 10 Data Sheet PN10439EJ01V0DS 0.6 PS7141E-1A,PS7141EL-1A TURN-OFF TIME vs. FORWARD CURRENT TURN-OFF TIME DISTRIBUTION 30 0.6 n = 50 pcs, IF = 10 mA, VO = 5 V 0.5 25 0.4 20 Number (pcs) Turn-off Time toff (ms) VO = 5 V 0.3 0.2 0.1 10 5 0 5 10 15 20 25 0 30 0.05 0.06 0.07 0.08 Forward Current IF (mA) Turn-off Time toff (ms) NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 6.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 100 75 Normalized Turn-off Time toff 3.0 Normalized Turn-on Time ton 15 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, VO = 5 V 5.0 4.0 3.0 2.0 1.0 0.0 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Ambient Temperature TA (˚C) ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE On-state Resistance Ron (Ω) 3.0 Normalized to 1.0 at TA = 25˚C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Remark The graphs indicate nominal characteristics. Data Sheet PN10439EJ01V0DS 9 PS7141E-1A,PS7141EL-1A TAPING SPECIFICATIONS (in millimeters) 4.5 MAX. 10.3±0.1 7.5±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.0±0.1 10.4±0.1 1.55±0.1 12.0±0.1 0.3 Tape Direction PS7141EL-1A-E3 PS7141EL-1A-E4 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 21.0±0.8 100±1.0 330±2.0 2.0±0.5 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 10 Data Sheet PN10439EJ01V0DS 15.9 to 19.4 Outer edge of flange PS7141E-1A,PS7141EL-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Data Sheet PN10439EJ01V0DS 11 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Concentration Limit per RoHS (values are not yet fixed) Concentration contained in CEL devices -A Not Detected Lead (Pb) < 1000 PPM Mercury < 1000 PPM Not Detected Cadmium < 100 PPM Not Detected Hexavalent Chromium < 1000 PPM Not Detected PBB < 1000 PPM Not Detected PBDE < 1000 PPM Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.