PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 8-A, 5-V INPUT NONISOLATED WIDE-OUTPUT ADJUST SIP MODULE FEATURES APPLICATIONS • • • • • • • • • • • • • • • • Up to 8-A Output Current 5-V Input Bus Wide-Output Voltage Adjust (0.8 V to 3.6 V) Efficiencies up to 95% On/Off Inhibit Prebias Start-Up Undervoltage Lockout Auto-Track™ Sequencing Output Overcurrent Protection (Nonlatching, Auto-Reset) Operating Temperature: –40°C to 85°C Safety Agency Approvals: UL/cUL 60950, EN60950 VDE (Pending) POLA™ Compatible Multivoltage Digital Systems High-Density Logic Circuits High-End Computers and Servers 5-V Intermediate Bus Architectures DESCRIPTION The PTV05010W is a ready-to-use nonisolated power module, and part of a new class of complete dc/dc switching regulators from Texas Instruments. These regulators combine high performance with double-sided, surface-mount construction, to give designers the flexibility to power the most complex multiprocessor digital systems using off-the-shelf catalog parts. The PTV05010W series is produced in a 8-pin, single in-line pin (SIP) package. The SIP footprint minimizes board space, and offers an alternate package option for space conscious applications. Operating from a 5-V input bus, the series provides step-down conversion to a wide range of output voltages, at up to 8 A of output current. The output voltage can be set to any value over the range, 0.8 V to 3.6 V, using a single external resistor. This series includes Auto-Track™. Auto-Track™ simplifies the task of supply-voltage sequencing in a power system by enabling the output voltage of multiple modules to accurately track each other, or any external voltage, during power up and power down. Other operating features include an on/off inhibit, and the ability to start up into an existing output voltage or prebias. A nonlatching overcurrent trip protects against load faults. Target applications include complex multivoltage, multiprocessor systems that incorporate the industry's high-speed microprocessors, bus drivers, and the TMS320™ DSP family. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. POLA, Auto-Track, TMS320 are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005, Texas Instruments Incorporated PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. STANDARD APPLICATION Track 5 Track VI 8 Inhibit GND GND 6 7 C1* 100 mF (Required) VO 2, 3 7 VO PTV05010 VI VO Adj 1 4 C2* 10 mF Ceramic (Required) C3* 100 mF (Optional) RSET# 1% 0.05 W (Required) Inhibit GND C4* 10 mF Ceramic (Optional) L O A D GND * See the Application Information for capacitor recommendations # RSET is required to adjust the output voltage higher than its lowest value. See the Application Information section for values. ORDERING INFORMATION PTV05010 (Basic Model) (1) Output Voltage Part Number DESCRIPTION Package (1) 0.8 V – 3.6 V (Adjustable) PTV05010WAH Vertical T/H EVA See the applicable package drawing for dimensions and PC board layout. ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range unless otherwise noted (1) UNIT V(Track) Track input voltage –0.3 V to VI +0.3 V TA Operating temperature range Over VI range Lead temperature 5 seconds –40°C to 85°C 260°C (2) Tstg Storage temperature –40°C to 125°C V(INH) Inhibit input voltage –0.3 V to 7 V (1) (2) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. This product is not compatible with surface-mount reflow solder processes. PACKAGE SPECIFICATIONS PTV05010W (Suffix AH) Weight 2.5 grams Flammability Meets UL 94 V-O Mechanical shock Per Mil-STD-883D, Method 2002.3, 1 ms, 1/2 sine, mounted 500 Gs Mechanical vibration Mil-STD-883D, Method 2007.2, 20 Hz - 2000 Hz 10 Gs (1) 2 Qualification limit. (1) (1) PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 ELECTRICAL CHARACTERISTICS operating at 25°C free-air temperature, VI = 5 V, VO = 3.3 V, C1 = 100 µF, C2 = 10 µF, C3 = 0 µF, C4 = 0 µF, and I O = IO max (unless otherwise noted) PARAMETER TEST CONDITIONS IO Output current Natural convection airflow VI Input voltage range Over IO load range MIN TYP 0 η 4.5 IO (trip) A 5.5 V ±2% –40°C < TA < 85°C Line regulation Over VI range ±5 Load regulation Over IO range ±5 Total output variation Includes set-point, line, load, –40°C ≤ TA≤ 85°C Adjust range Over VI range IO = IO max (2) ±0.5% Temperature variation Efficiency UNIT (1) 8 Set-point voltage tolerance VO MAX mV mV ±3 0.8 (2) 3.6 RSET = 698 Ω, VO = 3.3 V 95% RSET = 2.21 kΩ, VO = 2.5 V 93% RSET = 5.49 kΩ, VO = 1.8 V 90% RSET = 8.87 kΩ, VO = 1.5 V 89% RSET = 17.4 kΩ, VO = 1.2 V 87% RSET = 36.5 kΩ, VO = 1 V 85% %Vo V Output voltage ripple (pk-pk) 20-MHz bandwidth 15 mVPP Overcurrent threshold Reset, followed by auto-recovery 12 A 1-A/µs load step, 50 to 100% IO max, C3 = 100 µF Transient response Track control (pin 9) UVLO Undervoltage lockout 70 µs 100 mV IIL Input low current Pin to GND Control slew-rate limit C3 ≤ C3 (max) –0.13 1 VI increasing 4.3 VI decreasing VIH Input high voltage Inhibit control (pin 12) Recovery time Vo over/undershoot VIL Input low voltage IIL Input low current 3.1 VI – 0.5 Referenced to GND Open –0.2 Pin to GND –0.24 Input standby current Inhibit (pin 7) to GND, Track (pin 5) open 5 ƒS Switching frequency Over VI and IO ranges External output capacitance (C3) 550 Nonceramic (C1) Ceramic (C2) Capacitance value (1) (2) (3) (4) (5) (6) (7) Reliability (4) 10 (4) Nonceramic 0 Ceramic 0 Equivalent series resistance (nonceramic) MTBF 100 Per Telcordia SR-332, 50% stress, TA = 40°C, ground benign 4 600 V (3) 0.6 II (stby) External input capacitance 4.5 3.7 mA V/ms V mA mA 650 kHz µF 100 (5) 3300 (6) 300 (7) µF mΩ 5 106 Hr See thermal derating curves for safe operating area (SOA), or consult factory for appropriate derating. The set-point voltage tolerance is affected by the tolerance and stability of RSET. The stated limit is unconditionally met if RSET has a tolerance of 1%, with 100 ppm/°C or better temperature stability. This control pin is internally pulled up to the input voltage, VI. If this input is left open circuit, the module will operate when input power is applied. A small low-leakage (< 100 nA) MOSFET is recommended for control. For further information, see the related application note. A 10-µF high-frequency ceramic capacitor and 100-µF electrolytic input capacitor are required for proper operation. The electrolytic capacitor must be rated for 300 mArms minimum ripple current. See the Application Information for further guidance on capacitor selection. An external output capacitor is not required for basic operation. Adding 100 µF of distributed capacitance at the load improves the transient response. This is the calculated maximum. The minimum ESR limitation often results in a lower value. See the Application Information for further guidance. This is the typical ESR for all the electrolytic (nonceramic) output capacitance. Use 7 mΩ as the minimum when using maximum-ESR values to calculate. 3 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 TYPICAL CHARACTERISTICS (5-V INPUT) (8) (9) EFFICIENCY vs OUTPUT CURRENT OUTPUT VOLTAGE RIPPLE vs OUTPUT CURRENT 100 50 VO- Output Ripple Voltage - mVPP VO = 3.3 V Efficiency - % 90 80 VO = 2.5 V VO = 1.8 V 70 VO = 0.8 V VO = 1.2 V 60 50 2 1 3 4 5 6 7 10 VO = 0.8 V 0 1 2 3 4 5 6 7 IO - Output Current - A Figure 1. Figure 2. POWER DISSIPATION vs OUTPUT CURRENT TEMPERATURE DERATING vs OUTPUT CURRENT 8 90 80 Air Temperature - oC PD - Power Dissipation - W VO = 3.3 V IO - Output Current - A 2 1.5 1 VO = 3.3 V 400 LFM 70 200 LFM 100 LFM 60 Nat Conv 50 40 0.5 0 Air Flow 30 0 1 2 3 4 5 6 IO - Output Current - A Figure 3. 4 20 8 VO = 0.8 V (9) 30 0 0 2.5 (8) 40 7 8 20 1 2 3 4 5 6 7 8 IO - Output Current - A Figure 4. The electrical characteristic data has been developed from actual products tested at 25°C. This data is considered typical for the converter. Applies to Figure 1, Figure 2, and Figure 3. The temperature derating curves represent the conditions at which internal components are at or below the manufacturer's maximum operating temperatures. The airflow direction is parallel to the long axis of the module. Derating limits apply to modules soldered directly to a 100 mm x 100 mm, double-sided PCB with 2 oz. copper. Applies to Figure 4. PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 DEVICE INFORMATION TERMINAL FUNCTIONS TERMINAL NAME DESCRIPTION NO. VI 8 VO 2, 3 The regulated positive power output with respect to the GND node. GND 1, 6 This is the common ground connection for the VI and VO power connections. It is also the 0-Vdc reference for the control inputs. Both pins must be connected to common ground. Inhibit 7 The Inhibit pin is an open-collector/drain, active-low input that is referenced to GND. Applying a low-level ground signal to this input disables the module's output and turns off the output voltage. When the Inhibit control is active, the input current drawn by the regulator is significantly reduced. If the inhibit feature is not used, the control pin should be left open-circuit. The module then produces an output voltage whenever a valid input source is applied. Vo Adjust 4 The positive input voltage power node to the module, which is referenced to common GND. A 1% or 0.5% resistor must be connected directly between this pin and GND (pin 1 is recommended) to set the output voltage of the module higher than its lowest value. The temperature stability of the resistor should be 100 ppm/°C (or better). The set-point range is 0.8 V to 3.6 V. The resistor value can be calculated using a formula. If this input is left open-circuit, the output voltage defaults to its lowest value. For further information, consult the related application note. The specification table gives the standard resistor values for a number of common output voltages. Track 5 This is an analog control input that enables the output voltage to follow an external voltage. This pin becomes active typically 20 ms after the input voltage has been applied, and allows direct control of the output voltage from 0 V up to the nominal set-point voltage. Within this range, the output follows the voltage at the Track pin on a volt-for-volt basis. When the control voltage is raised above this range, the module regulates at its set-point voltage. The feature allows the output voltage to rise simultaneously with other modules powered from the same input bus. If unused, this input should be connected to VI. NOTE: Due to the undervoltage lockout feature, the output of the module cannot follow its own input voltage during power up. Consult the related Application Information for further guidance. Front View of Module PIN 1 Figure 5. Pin Terminal Locations 5 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 APPLICATION INFORMATION Capacitor Recommendations for the PTV05010W Power Module Input Capacitors The required input capacitors are a 10-µF ceramic and a minimum of 100-µF electrolytic type. The 100-µF capacitance must be rated for 300 mArms ripple current capability. See Table 1. The above ripple current requirements are conditional that the 10-µF ceramic capacitor is present. The 10-µF X5R/X7R ceramic capacitor is necessary to reduce both the magnitude of ripple current through the electroytic capacitor and the amount of ripple current reflected back to the input source. Ceramic capacitors should be located within 0.5 inch. (1,3 cm) of the module's input pins. Additional ceramic capacitors can be added to reduce the RMS ripple current requirement for the electrolytic capacitor. Ripple current (Arms) rating, less than 150-mΩ equivalent series resistance (ESR), and temperature are the major considerations when selecting input capacitors. Unlike polymer-tantalum capacitors, regular tantalum capacitors have a recommended minimum voltage rating of 2 × (max. dc voltage + ac ripple). This is standard practice to ensure reliability. Only a few tantalum capacitors were found to have sufficient voltage rating to meet this requirement. At temperatures below 0°C, the ESR of aluminum electrolytic capacitors increases. For these applications, Os-Con, polymer-tantalum, and polymer-aluminum types should be considered. Output Capacitor (Optional) For applications with load transients (sudden changes in load current), regulator response benefits from external output capacitance. The recommended output capacitance of 100 µF allows the module to meet its transient response specification. For most applications, a high-quality computer-grade aluminum electrolytic capacitor is adequate. These capacitors provide decoupling over the frequency range, 2 kHz to 150 kHz, and are suitable when ambient temperatures are above 0°C. For operation below 0°C, tantalum-, ceramic-, or Os-Con-type capacitors are recommended. When using one or more nonceramic capacitors, the calculated equivalent ESR should be no lower than 4 mΩ (7 mΩ using the manufacturer's maximum ESR for a single capacitor). A list of preferred low-ESR-type capacitors are identified in Table 1. Ceramic Capacitors Above 150 kHz, the performance of aluminum electrolytic capacitors is less effective. Multilayer ceramic capacitors have low ESR and a resonant frequency higher than the bandwidth of the regulator. They can be used to reduce the reflected ripple current at the input as well as improve the transient response of the output. When used on the output, their combined ESR is not critical as long as the total value of ceramic capacitance does not exceed approximately 300 µF. Also, to prevent the formation of local resonances, do not place more than five identical ceramic capacitors in parallel with values of 10 µF or greater. Tantalum Capacitors Tantalum-type capacitors can only be used on the output bus, and are recommended for applications where the ambient operating temperature can be less than 0°C. The AVX TPS, Sprague 593D/594/595 and Kemet T495/T510 capacitor series are suggested over many other tantalum types due to their higher rated surge, power dissipation, and ripple current capability. As a caution, many general-purpose tantalum capacitors have considerably higher ESR, reduced power dissipation, and lower ripple current capability. These capacitors are also less reliable as they have reduced power dissipation and surge current ratings. Tantalum capacitors that have no stated ESR or surge current rating are not recommended for power applications. When specifying Os-con and polymer tantalum capacitors for the output, the minimum ESR limit is encountered before the maximum capacitance value is reached. Capacitor Table Table 1 identifies the characteristics of capacitors from a number of vendors with acceptable ESR and ripple current (rms) ratings. The recommended number of capacitors required at both the input and output buses is identified for each capacitor type. 6 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 APPLICATION INFORMATION (continued) Note: This is not an extensive capacitor list. Capacitors from other vendors are available with comparable specifications. Those listed are for guidance. The RMS ripple current rating and ESR (at 100 kHz) are critical parameters necessary to ensure both optimum regulator performance and long capacitor life. Designing for Fast Load Transients The transient response of the dc/dc converter has been characterized using a load transient with a di/dt of 1 A/µs. The typical voltage deviation for this load transient is given in the data sheet specification table using the optional value of output capacitance. As the di/dt of a transient is increased, the response of a converter regulation circuit ultimately depends on its output capacitor decoupling network. This is an inherent limitation with any dc/dc converter once the speed of the transient exceeds its bandwidth capability. If the target application specifies a higher di/dt or lower voltage deviation, the requirement can only be met with additional output capacitor decoupling. In these cases, special attention must be paid to the type, value, and ESR of the capacitors selected. If the transient performance requirements exceed that specified in the data sheet, or the total amount of load capacitance is above 3000 µF, the selection of output capacitors becomes more important. Table 1. Input/Output Capacitors Capacitor Characteristics Working Voltage (V) Value (µF) Max ESR at 100 kHz (Ω) Panasonic, Aluminum 10 330 WA(SMD) 6.3 150 FK (SMD) 6.3 PSA,Poly- Aluminum (Radial) Quantity Max Ripple Current at 85°C (Irms) (mA) Physical Size (mm) Input Bus Optional Output Bus 0.117 555 8 × 11.5 1 1 EEUFC1A331 0.035 3050 8 × 6.9 1 1 EEFWA0J151P 470 0.16 600 8 × 10.2 1 1 EEVFK0J471P 6.3 220 0.02 3160 6.3 × 9.8 1 ≤3 LXZ, Aluminum (Radial) 10 470 0.12 555 8 × 125 1 1 LXZ10VB471M8X12LL MVZ, Auminum-(SMD) 16 680 0.09 670 10 × 10 1 1 MVZ16VC681MJ10TP PXA, Poly-Aluminum (SMD) 10 120 0.027 2800 8 × 6,7 1 ≤3 PXA10VC121MH70TP Nichicon, Aluminum 16 270 0.09 575 10 × 12,5 1 1 UPM1C271MHH6 HD (Radial) 10 470 0.072 760 8 × 11,5 1 1 UHD1A471MPR TP, Poscap 10 220 0.025 2400 7.3 L × 4.3 W ≤2 10TPE220M SP, Os-Con 6.3 120 0.035 >1900 6,3 × 6,8 1 ≤3 6SP120M SVP, Os-Con (SMD) 6.3 100 0.04 1810 6.3 × 6,0 1 ≤3 6SVP100M AVX, Tantalum, Series III 10 100 0.075 >1090 N/R ≤4 TPSC107M010R0075 TPS (SMD) 10 150 0.05 >1559 N/R ≤4 TPSD157M010R0050 T520, Poly-Tant 10 100 0.055 1500 ≤4 T520D107M010ASE055 10 330 0.01 >3800 4.3 W × 7.3 L × 4H 1 T530, Poly-Tant/Organic 1 ≤1 T530X337M010ASE010 Vishay-Sprague 94SVP,(Oscon) (SMD) 10 120 0.04 2120 8 ×7 1 ≤3 94SVP127X0010E7 595D, Tantalum (SMD) 10 220 0.14 1040 7.5 L × 4.3 W × 4.1 H 1 ≤4 595D227X0010D2T 94SA, Os-Con (Radial) 10 100 0.03 2670 10 × 10.5 ≤3 94SA107X0010EBP Kemet, Ceramic X5R (SMD) 16 10 0.002 — 3225 ≥1 (2) ≤5 C1210C106M4PAC 6.3 22 0.002 3225 ≥1 (2) ≤5 C1210C226K9PAC 3225 ≥1 (2) ≤5 C1210C476K9PAC Capacitor Vendor, Type/Series (Style) Vendor Part Number United Chemi-Con PSA6.3VB220MF11 Sanyo 7.3L × 5.7 W × 4.1 H (1) 1 Kemet (SMD) 6.3 (1) (2) 47 0.002 1 Total capacitance of 94 µF is acceptable based on the combined ripple current rating. Ceramic capacitors are required to complement electrolytic types at the input and to reduce high-frequency ripple current. 7 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 APPLICATION INFORMATION (continued) Table 1. Input/Output Capacitors (continued) Capacitor Characteristics Capacitor Vendor, Type/Series (Style) Murata, Ceramic X5R (SMD) TDK, Ceramic X5R (SMD) Quantity Working Voltage (V) Value (µF) Max ESR at 100 kHz (Ω) Max Ripple Current at 85°C (Irms) (mA) Physical Size (mm) Input Bus Optional Output Bus 6.3 100 0.002 — 3225 ≥1 (2) ≤3 GRM32ER60J107M 6.3 47 ≥1 (2) ≤5 GRM32ER60J476M 16 22 ≥1 (2) ≤5 GRM32ER61C226K 16 10 ≥1 (2) ≤5 GRM32DR61C106K 6.3 100 ≥1 (2) ≤3 C3225X5R0J107MT 6.3 47 ≥1 (2) ≤5 C3225X5R0J476MT 16 22 ≥1 (2) ≤5 C3225X5R1C226MT 16 10 ≥1 (2) ≤5 C3225X5R1C106MT 0.002 — 3225 Vendor Part Number Adjusting the Output Voltage The VO Adjust control (pin 4) sets the output voltage of the PTV05010W product to a value over the range, 0.8 V to 3.6 V. The adjustment method requires the addition of a single external resistor, RSET, that must be connected directly between the VO Adjust and the regulator's output GND (pin 1 is recommended). Without an adjust resistor, the output voltage is set to its lowest value. Table 2 gives the preferred value of the external resistor for a number of standard voltages, along with the actual output voltage that this resistance value provides. Figure 6 shows the placement of the required resistor. Table 2. Nearest Standard Values of RSET for Common Output Voltages VO (Required) RSET (Standard Value) VO (Actual) 3.3 V 698 Ω 3.309 V 2.5 V 2.21 kΩ 2.502 V 2V 4.12 kΩ 2.010 V 1.8 V 5.49 kΩ 1.803 V 1.5 V 8.87 kΩ 1.504 V 1.2 V 17.4 kΩ 1.202 V 1V 36.5 kΩ 1.005 V 0.8 V Open 0.800 V For other output voltages, the value of the required resistor can either be calculated or simply selected from the range of values given in Table 3. Equation 1 may be used for calculating the adjust resistor value. RSET = 10 kW x 8 0.8 V VO - 0.8 V = 2.49 kW (1) PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 VO VO PTV05010W GND GND VO Adj CO RSET, 1% GND Figure 6. VO Adjust Resistor Placement Table 3. Calculated Values of RSET for Other Output Voltages VO RSET VO RSET VO RSET 0.800 Open 1.450 9.82 kΩ 2.550 2.08 kΩ 0.825 318 kΩ 1.500 8.94 kΩ 2.600 1.95 kΩ 0.850 158 kΩ 1.550 8.18 kΩ 2.650 1.83 kΩ 0.875 104 kΩ 1.600 7.51 kΩ 2.700 1.72 kΩ 0.900 77.5 kΩ 1.650 6.92 kΩ 2.750 1.61 kΩ 0.925 61.5 kΩ 1.700 6.40 kΩ 2.800 1.51 kΩ 0.950 50.8 kΩ 1.750 5.93 kΩ 2.850 1.41 kΩ 0.975 43.2 kΩ 1.800 5.51 kΩ 2.900 1.32 kΩ 1.000 37.5 kΩ 1.850 5.13 kΩ 2.950 1.23 kΩ 1.025 33.1 kΩ 1.900 4.78 kΩ 3.000 1.15 kΩ 1.050 29.5 kΩ 1.950 4.47 kΩ 3.050 1.07 kΩ 1.075 26.6 kΩ 2.000 4.18 kΩ 3.100 998 Ω 1.100 24.2 kΩ 2.050 3.91 kΩ 3.150 914 Ω 1.125 22.1 kΩ 2.100 3.66 kΩ 3.200 843 Ω 1.150 20.4 kΩ 2.150 3.44 kΩ 3.250 775 Ω 1.175 18.8 kΩ 2.200 3.22 kΩ 3.300 710 Ω 1.200 17.5 kΩ 2.250 3.03 kΩ 3.350 647 Ω 1.225 16.3 kΩ 2.300 2.84 kΩ 3.400 587 Ω 1.250 15.3 kΩ 2.350 2.67 kΩ 3.450 529 Ω 1.300 13.5 kΩ 2.400 2.51 kΩ 3.500 473 Ω 1.350 12.1 kΩ 2.450 2.36 kΩ 3.550 419 Ω 1.400 10.8 kΩ 2.500 2.22 kΩ 3.600 367 Ω 9 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 Features of the PTH/PTV Family of Non-Isolated, Wide-Output Adjust Power Modules POLA™ Compatibility The PTH/PTV family of non-isolated, wide-output adjustable power modules from Texas Instruments are optimized for applications that require a flexible, high-performance module that is small in size. Each of these products are POLA™ compatible. POLA-compatible products are produced by a number of manufacturers, and offer customers advanced, non-isolated modules with the same footprint and form factor. POLA parts are also ensured to be interoperable, thereby providing customers with true second-source availability. Soft-Start Power Up The Auto-Track feature allows the power up of multiple PTH/PTV modules to be directly controlled from the Track pin. However, in a stand-alone configuration, or when the Auto-Track feature is not being used, the Track pin should be directly connected to the input voltage, VI (see Figure 7). 5 Track 8 GND 6 C1 100 mF GND 1 1.8 V VO 2, 3 PTV05010W VI Adjust 4 RSET C2 10 mF + 5V 5.49 kW 1%, 0.05 W + GND C3 100 mF L O A D GND Figure 7. Power-Up Application Circuit When the Track pin is connected to the input voltage, the Auto-Track function is permanently disengaged. This allows the module to power up entirely under the control of its internal soft-start circuitry. When power up is under soft-start control, the output voltage rises to the set-point at a quicker and more linear rate. VI (2 V/div) VO (1 V/div) II (2 A/div) t - Time = 5 ms/div Figure 8. Power-Up Waveform 10 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 From the moment a valid input voltage is applied, the soft-start control introduces a short time delay (typically 8 ms to 15 ms) before allowing the output voltage to rise. The output then progressively rises to the module set-point voltage. Figure 8 shows the soft-start power-up characteristic of the PTV05010W, operating from a 5-V input bus and configured for a 1.8-V output. The waveforms were measured with a 5-A resistive load and the Auto-Track feature disabled. The initial rise in input current when the input voltage first starts to rise is the charge current drawn by the input capacitors. Power up is complete within 25 ms. Overcurrent Protection (OCP) For protection against load faults, the modules incorporate output overcurrent protection. Applying a load that exceeds the overcurrent threshold causes the regulated output to shut down. Following shutdown, a module periodically attempts to recover by initiating a soft-start power up. This is described as a hiccup mode of operation, whereby the module continues in the cycle of successive shutdown and power up until the load fault is removed. During this period, the average current flowing into the fault is significantly reduced. Once the fault is removed, the module automatically recovers and returns to normal operation. Output On/Off Inhibit For applications requiring output voltage on/off control, the modules incorporate an output Inhibit control pin. The inhibit feature can be used wherever there is a requirement for the output voltage from the regulator to be turned off. The power modules function normally when the Inhibit input is left open-circuit, providing a regulated output whenever a valid source voltage is connected to VI with respect to GND. Figure 9 shows the typical application of the inhibit function. Note the discrete transistor (Q1). The Inhibit input has its own internal pullup (see footnotes to electrical characteristics table). The input is not compatible with TTL logic devices. An open-collector (or open-drain) discrete transistor is recommended for control. Track VI VI PTV05010W Inhibit GND C1 GND VO VO VOAdj C2 C3 Q1 BSS138 RSET L O A D 1 = Inhibit GND GND Figure 9. On/Off Inhibit Application Circuit Turning Q1 on applies a low voltage to the Inhibit control and disables the output of the module. If Q1 is then turned off, the module executes a soft-start power-up sequence. A regulated output voltage is produced within 25 ms. Figure 10 shows the typical rise in both the output voltage and input current, following the turnoff of Q1. The turnoff of Q1 corresponds to the rise in the waveform, Q1 VDS. The waveforms were measured with a 5-A constant current load. 11 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 VO (1 V/div) II (2 A/div) Q1 VDS (5 V/div) t - Time = 5 ms/div Figure 10. Inhibit Waveform Auto-Track™ Function The Auto-Track function is unique to the PTH/PTV family, and is available with all POLA products. Auto-Track was designed to simplify the amount of circuitry required to make the output voltage from each module power up and power down in sequence. The sequencing of two or more supply voltages during power up is a common requirement for complex mixed-signal applications that use dual-voltage VLSI ICs such as DSPs, microprocessors, and ASICs. How Auto-Track™ Works Auto-Track works by forcing the module output voltage to follow a voltage presented at the Track control pin (1). This control range is limited to between 0 V and the module set-point voltage. Once the track-pin voltage is raised above the set-point voltage, the module's output remains at its set-point (2). As an example, if the Track pin of a 2.5-V regulator is at 1 V, the regulated output is 1 V. But if the voltage at the Track pin rises to 3 V, the regulated output does not go higher than 2.5 V. When under Auto-Track control, the regulated output from the module follows the voltage at its Track pin on a volt-for-volt basis. By connecting the Track pin of a number of these modules together, the output voltages follow a common signal during power up and power down. The control signal can be an externally generated master ramp waveform, or the output voltage from another power supply circuit (3). For convenience, the Track input incorporates an internal RC-charge circuit. This operates off the module input voltage to produce a suitable rising waveform at power up. Typical Application The basic implementation of Auto-Track allows for simultaneous voltage sequencing of a number of Auto-Track compliant modules. Connecting the Track control pins of two or more modules forces the Track control of all modules to follow the same collective RC-ramp waveform, and allows them to be controlled through a single transistor or switch; see Q1 in Figure 11. To initiate a power-up sequence, it is recommended that the Track control first be pulled to ground potential. This is done at or before input power is applied to the modules, and then held for at least 10 ms thereafter. This brief period gives the modules time to complete their internal soft-start initialization. Applying a logic level high signal to the circuit On/Off Control turns Q1 on and applies a ground signal to the Track input of the modules. After completing their internal soft-start intialization, the output of all modules remains at zero volts while Q1 is on. Q1 may be turned off 10 ms after a valid input voltage has been applied to the modules. This allows the track control voltage to automatically rise to the module input voltage. During this period, the output voltage of each module rises in unison with other modules to its respective set-point voltage. 12 www.ti.com PTV05010W SLTS242 – FEBRUARY 2005 Figure 12 shows the output voltage waveforms from the circuit of Figure 11 after the On/Off Control is set from a high-level to a low-level voltage. The waveforms, VO1 and VO2 represent the output voltages from the two power modules, U1 (3.3 V) and U2 (1.8 V), respectively. VO1 and VO2 are shown rising together to produce the desired simultaneous power-up characteristic. The same circuit also provides a power-down sequence. Power down is the reverse of power up, and is accomplished by lowering the track control voltage back to zero volts. The important constraint is that a valid input voltage must be maintained until the power down is complete. It also requires that Q1 be turned off relatively slowly. This is so that the Track control voltage does not fall faster than Auto-Track slew rate capability, which is 1 V/ms. The components R1 and C1 in Figure 11 limit the rate at which Q1 pulls down the Track control voltage. The values of 100 kΩ and 0.1 µF correlate to a decay rate of about 0.17 V/ms. The power-down sequence is initiated with a low-to-high transition at the On/Off Control input to the circuit. Figure 13 shows the power-down waveforms. As the Track control voltage falls below the nominal set-point voltage of each power module, then its output voltage decays with all the other modules under Auto-Track control. Notes on Use of Auto-Track™ 1. The Track pin voltage must be allowed to rise above the module set-point voltage before the module can regulate at its adjusted set-point voltage. 2. The Auto-Track function tracks almost any voltage ramp during power up, and is compatible with ramp speeds of up to 1 V/ms. 3. The absloute maximum voltage that may be applied to the Track pin is the input voltage VI. 4. The module cannot follow a voltage at its Track control input until it has completed its soft-start initialization. This takes about 10 ms from the time that a valid voltage has been applied to its input. During this period, it is recommended that the Track pin be held at ground potential. 5. The module is capable of both sinking and sourcing current when following a voltage at its Track input. Therefore, start up into an output prebias cannot be supported when a module is under Auto-Track control. Note: A prebias holdoff is not necessary when all supply voltages rise simultaneously under the control of Auto-Track. 6. The Auto-Track function can be disabled by connecting the Track pin to the input voltage (VI). When Auto-Track is disabled, the output voltage rises at a quicker and more linear rate after input power has been applied. 13 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 U1 Track Sense Vo1 = 3.3 V VI 5 V VO PTV05020W Adjust GND GND + + CI CO R2 698 kW C1 0.1 mF U2 On/Off Control 1 = Power Down 0 = Power Up R1 100 kW Track Q1 BSS138 VI Inhibit GND VoAdj + + CI 0 V Vo2 = 1.8 V 7 V O PTV05010W CO R3 5.49 kW Figure 11. Sequenced Power Up and Power Down Using Auto-Track VO1 (1 V/Div) VO1 (1 V/Div) VO2 (1 V/Div) VO2 (1 V/Div) On/Off Input (5 V/Div) On/Off Input (5 V/Div) t = 10 ms/Div Figure 12. Simultaneous Power Up With Auto-Track Control t = 10 ms/Div Figure 13. Simultaneous Power Down With Auto-Track Control Prebias Start-Up Capability A prebias start-up condition occurs as a result of an external voltage being present at the output of a power module prior to its output becoming active. This often occurs in complex digital systems when current from another power source is backfed through a dual-supply logic component, such as an FPGA or ASIC. Another path might be via clamp diodes, sometimes used as part of a dual-supply power-up sequencing arrangement. A 14 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 prebias can cause problems with power modules that incorporate synchronous rectifiers. This is because under most operating conditions, such modules can sink as well as source output current. The PTH/PTV modules incorporate synchronous rectifiers but do not sink current during start-up, or whenever the Inhibit pin is held low. Start-up includes an initial delay (approximately 8–15 ms), followed by the rise of the output voltage under the control of the module internal soft-start mechanism; see Figure 14. Conditions for Prebias Holdoff In order for the module to allow an output prebias voltage to exist (and not sink current), certain conditions must be maintained. The module holds off a prebias voltage when the Inhibit pin is held low, and whenever the output is allowed to rise under soft-start control. Power up under soft-start control occurs on the removal of the ground signal to the Inhibit pin (with input voltage applied), or when input power is applied with Auto-Track disabled(1). The input voltage must also be greater than the applied prebias source(2). The soft-start period is complete when the output begins rising above the prebias voltage. The module then functions as normal, and sinks current if a voltage higher than its set-point value is applied to its output. Note: If a prebias condition is not present, the soft-start period is complete when the output voltage has risen to either the set-point voltage, or the voltage applied at the module Track control pin, whichever is lowest, to its output. Demonstration Circuit Figure 15 shows the start-up waveforms for the demonstration circuit shown in Figure 16. The initial rise in VO2 is the prebias voltage, which is passed from the VCCIO to the VCORE voltage rail through the ASIC. Note that the output current from the module (IO2) is negligible until its output voltage rises above the applied prebias. VI (2 V/div) VI (2 V/div) VO1 (1 V/div) VO 2 (1 V/div) IO 2 (5 A/div) VO (1 V/div) Start-up period t = 10 ms/div Figure 14. PTV05010W Start-Up t = 10 ms/div Figure 15. Prebias Start-Up Waveforms NOTES: 1. The prebias start-up feature is not compatible with Auto-Track. If the rise in the output is limited by the voltage applied to the Track control pin, the output sinks current during the period that the track control voltage is below that of the back-feeding source. For this reason, Auto-Track should be disabled when not being used. This is accomplished by connecting the Track pin to the input voltage, VI. This raises the Track pin well above the set-point voltage prior to start-up, thereby defeating the Auto-Track feature. 2. To further ensure that the regulator output does not sink current when power is first applied (even with a ground signal applied to the Inhibit control input), the input voltage must always be greater than the applied prebias source. This condition must exist throughout the power-up sequence of the power system. 15 PTV05010W www.ti.com SLTS242 – FEBRUARY 2005 U1 9 7 Track VI = 5 V 5, 6 Sense 3, 4 V7 PTV05020W VI VO1 = 3.3 V O Inhibit GND GND VO Adj 10, 11 1, 2 12 + C1 8 R1 698 W C2 U2 C3 5 Track 8 VI Inhibit GND 7 U3 TPS3808G33 + 6 VCC 5 SENSE 3 4 MR RESET 1 C4 C5 VO PTV05010W 6 VO2 = 1.8 V 2, 3 + GND VOAdj 1 IO2 4 R2 5.49 kW + VCORE ASIC CT GND 2 C7 0.1µF Figure 16. Application Circuit Demonstrating Prebias Start-Up 16 VCCIO C6 PACKAGE OPTION ADDENDUM www.ti.com 19-Aug-2005 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing PTV05010WAH ACTIVE SIP MOD ULE EVA Pins Package Eco Plan (2) Qty 8 70 TBD Lead/Ball Finish Call TI MSL Peak Temp (3) Level-1-235C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated