PX-701 Clock Oscillator Features Process Compatible Reflow Surface Mount Package AT-Cut Crystal SONET Minimum Clock Specification Low Phase Noise Tight Tolerances Typical Applications Base Stations Test Equipment Synthesizers Previous Vectron Model Numbers C1260 Frequency Range 1 MHz – 175 MHz Standard Frequencies 17.408; 24.705; 30.720; 32.768; 34.368; 50; 76.8 MHz 77.76; 100; 125; 150; 155.52; 156.25; 175 MHz Frequency stabilities1 [Standard] Parameter Min vs. operating temperature range (Referenced to +25°C) -10.0 Parameter Min Initial tolerance Max Units Operating temperature range +10.0 ppm -20 … +70°C Max. Units Condition -5.0 +5.0 ppm vs. supply voltage change -1.0 +1.0 ppm VS ± 5% vs. load change -1.0 +1.0 ppm Load ± 5% /1. Year -3.0 +3.0 ppm / year (followingYears) -1.0 +1.0 ppm vs. aging vs. aging Typ Typ htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 1/7 Frequency stabilities1 [SC Cut Crystal-Option-10 to 52 MHz] Parameter Min Typ Max Units Operating temperature range vs. operating temperature range -20 … +70°C Parameter Min overall tolerance -20.0 Typ Max. Units Condition +20.0 ppm ( 15 Years aging, temp, initial, supply, load ) Condition Supply Voltage (Vs) Parameter Min Typ Max Units Supply voltage (Vs) 4.75 5.0 5.25 VDC Current consumption 40 mA @ HCMOS Current consumption 90 mA @ PECL 3.465 VDC Current consumption 30 mA @ LVHCMOS Current consumption 80 mA @ LVPECL Current consumption 25 mA @ LVDS Units Condition Supply voltage (Vs) 3.135 3.3 Parameter RF Output Min Typ Signal Max HCMOS Load 15.0 pF Rise and Fall time Duty cycle 40 Signal 45 Signal 40 Jitter Ω Vs - 2V 1 ns 20 to 80 % 55 % 100 Rise and Fall time Phase Noise @ Vs/2 LVDS Load Parameter @ 15 pF 10 to 90 % % 50 Rise and Fall time Duty cycle ns PECL Load Duty cycle 5 60 Ω 1 ns 60 % 10 to 90 % Additional Parameters Min Typ Max Units Condition -85 dBc/Hz 10 Hz @49,408 MHz -120 dBc/Hz 100 Hz HCMOS -145 dBc/Hz 1 kHz 3,3V -155 dBc/Hz 10 kHz -160 dBc/Hz 100 0,2 ps RMS kHz @ 12 kHz to 20 MHz htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 2/7 Parameter Additional Parameters Min Phase Noise Typ Max Units Condition -80 dBc/Hz 10 Hz @89,6 MHz -108 dBc/Hz 100 Hz PECL -134 dBc/Hz 1 kHz 3,3V -140 dBc/Hz 10 kHz -141 dBc/Hz 100 kHz Jitter 0,6 ps RMS Phase Noise -80 dBc/Hz 10 Hz @125 MHz -115 dBc/Hz 100 Hz PECL -135 dBc/Hz 1 kHz 3,3V -141 dBc/Hz 10 kHz -141 dBc/Hz 100 kHz 0,6 ps RMS Jitter Weight 2 Processing & Packing @ 12 kHz to 20 MHz g handling&processing note Parameter @ 12 kHz to 20 MHz Absolute Maximum Ratings Min Supply voltage (Vs) Typ Max Units 7 V Operable temperature range -30 +80 °C Storage temperature range -40 +90 °C Condition htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 3/7 Enclosure Type G241 < 53 MHz Type G251 > 1 MHz Height “H” Height “H” 2,3 mm 2,3 mm Dimensions: mm Dimensions: mm Pin Connections Pin Connections 1 N/C 1 N/C 2 N/C / Enable (optional) 2 N/C / Enable (optional) 3 Ground 3 Ground 4 RF Output 4 RF Output 5 N/C 5 Complementary RF Output / (N/C: HCMOS only) 6 Supply Voltage Input (Vs) 6 Supply Voltage Input (Vs) true table HCMOS LVPECL + LVDS Pin 2 Pin 4 Pin 5 Pin 4 Pin 5 High Data N/C No Data No Data Open Data High Tristate N/C Data compl. Data N/C Data compl. Data Low Marking PX-701 Frequency ● AYYWW htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 4/7 Typical Phase Noise and Jitter 49,408 MHz; HCMOS output 89,6 MHz; PECL output Frequency range [Hz] Jitter [ps rms] Frequency range [Hz] Jitter [ps rms] 12kHz to 20MHz 0.188ps 12kHz to 20MHz 1.002ps 125 MHz; PECL output Typical frequency stability vs temperature Frequency range [Hz] Jitter [ps rms] 12kHz to 20MHz 0.608ps htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 5/7 Standard Shipping Methode Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W ≤ 24 mm nur untere Lochreihe ∗by W ≤ 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P G218B / G223B 24 83,3 850 12 Recommanded Reflow Profile Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Profile Feature Pb-Free Assembly/ Sn-Pb Assembly Average ramp-up rate (TL to Tp) 3°C/second max. Time 25°C to Peak Temperature 8 minutes max. 150°C 200°C 60-180 seconds Time maintainted above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Preheat -Temperature Min Tsmin -Temperature Min Tsmax -Time (min to max) (ts) TSmax to TL-Ramp-up Rate 3°C/second max Time maintainted above -Temperature (TL) -Time (tL) 217°C 60-150 seconds Time within 5°C of actual Peak Temperature (tP) 20-40 seconds Peak Temperature (TP) max 260°C Ramp-down Rate 6°C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. SMD oscillators must be on the top side of the PCB during the reflow pocess. htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 6/7 How to order this product: Use this worksheet to forward the following information to your factory representative : Model Height - Supply Voltage Code RF Output Code Temperature Range - PX-701 0 - D A J - Stability X - Frequency 105 X - 10MHz Height: 0: 2,3 mm Supply Voltage Code:RF Output Code: HCMOS E: 3,3 VA: C: PECL D: 5 V D: LVDS Temperature Range/ Stability Code: J-105: -20...+70°C ±10ppm J-205: -20...+70°C ±20ppm over all Notes: 1 Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 3 Phase noise degrades with increasing output frequency. 4 Subject to technical modification. 5 Contact factory for availability. htttp://www.vectron.com Vectron International•267 LowellRoad, Hudson, New Hampshire 03051•Tel:+1-88-VECTRON-1 Vectron International GmbH & Co. KG • Landstraße, 74924 Neckarbischofsheim, Germany • Tel: +49 7268 801 100 FX-701 page: 7/7