ADSL Magnetics Lucent TM01335 • Designed for ADSL filter • Operating and storage temperature range: -40° to +85°C • Minimum interwinding breakdown voltage of 1000 Vrms • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS at 25°C Turns Ratio 2% Inductance1 mH 6% (1-4) : (2-3) (1-4) 1 : 01 2.6 Part Number S560-6100-85 Inductance1 mH min. at 90mA DC 2.4 Leakage Inductance2 µH max DCR Ω max (1-4) (1-4) (2-3) 5 10.5 10.5 1. Inductance measured at 10 kHz, 0.1 Vac 2. Leakage inductance measured at 100 kHz, 0.1 Vac SCHEMATIC S560-6100-85 1 4 1:1 2 3 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 05.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Lucent TM01335 MECHANICAL S560-6100-85 0.240 [6.10] 0.310 [7.87] max 0.040 [1.02] 0.095 [2.41] 0.390 [9.91] max 0.355 [9.02] Suggested PCB Pad Layout 0.440 [11.18] max 0.020 [0.51] 0.180 [4.57] 0.200 [5.08] 0.335 [8.51] max Dimensions are in inches (millimeters). Standard dimension tolerance is ±0.005 (0.13) unless otherwise noted. Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards - JEDEC SO Package User Feed Direction Orientation of Component Inside Pocket ©2001 Bel Fuse Inc. Specifications subject to change without notice. 05.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2