ADSL Magnetics Texas Instruments • • TM01386 Designed to comply with the requirements of GR1089, UL1950, EN60950, BABT and CSA950 to provide a supplementary insulation barrier with a working voltage of 250V • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias Minimum interwinding breakdown voltage of 2000 Vrms ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 mH ±5% Leakage Inductance µH max DCR Ω max Chip : Line Line Side Line Side Chip Side 1 : 1.95 1.5 15 0.55 Longitudinal Balance2 dB min Insertion Loss2 dB max Frequency Response2 dB max Harmonic Distortion2 dB max Line Side 1 MHz 300kHz 100kHz 1.1 MHz 15 Vpp 100 kHz 2.0 55 0.5 ±0.5 -80 Part Number S560-6600-AB 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measurements made with 100Ω line impedance SCHEMATIC S560-6600-AB 10 Chip 7 1 Line 4 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 09.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Texas Instruments TM01386 MECHANICAL 1 5 S560-6600-AB 0.741 [18.82] 0.060 [1.52] 6 10 0.100 [2.54] 0.087 [2.21] 0.028 [0.71] 0.100 [2.54] 0.585 [14.86] max 0.540 [13.72] max 0.500 [12.70] max 0.005 [0.13] 10 Edges 0.606 [15.39] 0.699 [17.75] max Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 32 mm wide by 24 mm pitch; 13 inch OD, 4 inch ID 200 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2001 Bel Fuse Inc. Specifications subject to change without notice. 09.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2