ADSL Magnetics TM02392 • Designed for use with Texas Instruments’ AC5 TNETD 5800 ADSL chipset • Approved by UL and BABT per the requirements of 60950 safety documents UL file number E169987 BABT certificate number NC/011450 • • • Operating and storage temperature range: -40° to +85° C • Meets IEC 695, 2-2 flammability requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias Minimum interwinding breakdown voltage of 1500 Vrms ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio ±2% Inductance1 µH ±5% Leakage Inductance µH max Interwinding Capacitance pF max Chip : Line Line Side Line Side Between 1&8 Chip Side 1 : 1.9 400 7 40 1.2 Part Number S560-6600-BR DCR Ω max Longitudinal Balance2 dB min Insertion Loss2 dB max Frequency Response2 dB max Harmonic Distortion2 dB max Line Side 30 kHz 1.1 MHz 300 kHz 30 kHz 1.1 MHz 15 Vpp 100 kHz 1.8 50 0.4 ±0.35 -80 All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured with line impedance of 100 Ω SCHEMATIC S560-6600-BR 1 8 3 6 2 7 4 5 Line Chip ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics TM02392 MECHANICAL 1 S560-6600-BR 0.061 [1.55] 4 0.324 [8.23] 8 5 0.098 [2.50] 0.048 [1.22] Suggested PCB Pad Layout 0.385 [9.78] max 0.339 [8.61] max 0.450 [11.43] max 0.098 [2.50] 0.024 [0.61] 0.227 [5.77] 0.299 [7.59] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2