ETC 36050005

Compression Fittings
36 Series Metric
4 mm – 28 mm O/D tube
● Wide range of types and sizes
● Rugged and durable
● Suitable for use under extreme conditions of
pressure and temperature
● Ideal for most general industrial applications
Technical Data
Medium:
Compressed air*.
Ordering Information
To order, quote appropriate product number
from the tables on the following pages.
*Consult our Technical Service for use with other fluids.
Operating Pressure:
The maximum working pressure is limited by the type of
tubing being used. Refer to Section 9.12 for details.
Operating Temperature:
The maximum working temperature is limited by the type of
tubing being used. Refer to Section 9.12 for details.
Tube Sizes:
4, 5, 6, 8, 10, 12, 15, 16, 18, 22, 28 mm O/D.
Tubing:
Nylon 11 or 12 and other plasticised or unplasticised tubing
which conforms to the tolerances specified in BS 5409:
Part 1 1976.
Copper, annealed and half-hard to BS 2871: Part 2.
Double wall brazed steel.
Materials
Brass to BS 2874: 1986 (CZ121) for tubing nut, sleeve and body
manufactured from bar. Brass to BS 2872: 1969 (CZ122) for
body manufactured from stamping. Banjo bolts have a bright
nickel plated finish.
06/97
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.01
Compression Fittings
Metric
Straight Connectors and Adaptors
STEM TAILPIECE
ADAPTOR
Tube stem to hose
36 0524
FEMALE TAILPIECE
ADAPTOR
Tube to hose
36 0522
STRAIGHT STEM
ADAPTOR
Tube stem to male
parallel BSP thread
STRAIGHT STEM
ADAPTOR
Tube stem to male
taper BSP thread
36 0521
NIPPLED STEM
CONNECTOR
Male tube to tube stem
36 0625
REDUCING CONNECTOR
Female tube to male tube
36 0517
BULKHEAD CONNECTOR
Female tube
36 0508
36 0531
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.07
Page 9.6.001.07
Page 9.6.001.07
Page 9.6.001.07
NIPPLED CONNECTOR
Male tube
MALE CONNECTOR
Male to male
UNEQUAL CONNECTOR
Female tube to male tube
STRAIGHT CONNECTOR
Female tube
BRACKETED STRAIGHT
CONNECTOR
Female tube
METRIC TO INCH
ADAPTOR
Male tube to female tube
NIPPLED ADAPTOR
Male tube to metric and
UNF female thread
36 0503
36 0552
36 0632
36 0562
36 0737
36 0562
36 0553
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.08
Page 9.6.001.09
Page 9.6.001.09
NIPPLED ADAPTOR
Male tube to male taper
BSP thread
NIPPLED ADAPTOR
Male tube to female
parallel BSP thread
STRAIGHT MALE
ADAPTOR
Female tube to male
taper BSP thread
36 0530
STRAIGHT MALE
ADAPTOR (NPTF)
Female tube to male
NPTF thread
36 0532
STRAIGHT MALE
ADAPTOR
Female tube to male
thread
36 0554
MALE ADAPTOR
STRAIGHT MALE
ADAPTOR
Female tube to male
parallel BSP thread
36 0504
Page 9.6.001.10
Page 9.6.001.10
Page 9.6.001.10
Page 9.6.001.10
Page 9.6.001.10
BRACKETED ELBOW
CONNECTOR
Female tube
36 0548
FEMALE ELBOW
ADAPTOR
Female tube to female
parallel BSP thread
36 0555
MALE ELBOW ADAPTOR
Female tube to male
taper BSP thread
MALE ELBOW ADAPTOR
Female tube to male
NPTF thread
36 0331
Page 9.6.001.12
Page 9.6.001.12
Page 9.6.001.13
Page 9.6.001.13
BRACKETED TEE
CONNECTOR
Female tube
MALE TEE ADAPTOR
Female tube to male
taper BSP thread
MALE SIDE TEE
ADAPTOR
Female tube to male
taper BSP thread
36 0628
36 0556
36 0557
Page 9.6.001.09
Page 9.6.001.09
STRAIGHT ADAPTOR
Female tube to female
parallel BSP thread
HOBBS STRAIGHT
CONNECTOR
Male parallel BSP thread
36 0505
Page 9.6.001.11
36 0738
36 0543
Page 9.6.001.17
Elbow Connectors and Adaptors
UNIVERSAL STEM ELBOW STEM ELBOW
Tube stem
CONNECTOR
Female tube to tube stem
36 0292
36 0551
ELBOW CONNECTOR
Female tube
36 0511
Page 9.6.001.11
Page 9.6.001.12
Page 9.6.001.11
36 0005
HOBBS ELBOW ADAPTOR
Female tube to male
parallel BSP thread
36 0541
Page 9.6.001.17
Tee, ‘Y’ and Four Way Connectors and Adaptors
STEM TEE CONNECTOR
Female tube to tube stem
90° STEM TEE
CONNECTOR
Female tube to tube stem
SIDE STEM TEE
CONNECTOR
Female tube to tube stem
36 0631
36 0511
36 0550
Page 9.6.001.14
‘Y’ CONNECTOR
Female tube
36 0558
Page 9.6.001.15
N/AL 9.6.001.02
Page 9.6.001.14
FOUR WAY CONNECTOR
Female tube
36 0514
Page 9.6.001.14
36 0627
36 0549
Page 9.6.001.14
Page 9.6.001.15
Page 9.6.001.15
Page 9.6.001.15
HOBBS TEE ADAPTOR
Female tube to male
parallel BSP thread
36 0516
Page 9.6.001.16
TEE CONNECTOR
Female tube
36 0542
Page 9.6.001.18
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Manifolds
SINGLE SIDED MANIFOLD
DOUBLE SIDED
MANIFOLD
36 0406
36 0304
Page 9.6.001.16
Page 9.6.001.16
Banjos
ELBOW BANJO ASSEMBLY
Non regulating BSPP bolt
Female tube to male
parallel BSP thread
36 0395
Page 9.6.001.20
ELBOW BANJO ASSEMBLY
Regulating BSPP bolt
Female tube to male
parallel BSP thread
36 0395
TEE BANJO ASSEMBLY
Non regulating BSPP bolt
Female tube to male
parallel BSP thread
ELBOW BANJO BODY
Tube
TEE BANJO BODY
Tube
36 0384
BANJO BOLTS
Regulating
36 0394
BANJO BOLTS
Non-regulating
36 0461
36 0451
36 0395
Page 9.6.001.20
Page 9.6.001.20
Page 9.6.001.21
Page 9.6.001.21
Page 9.6.001.21
Page 9.6.001.21
TAP
TUBING PLUG
Male tube thread
BULKHEAD LOCKNUT
HOBBS CONED LOCKNUT
Female parallel BSP
thread
36 0540
HOBBS SEAL
Female tube
SEALING WASHERS
For use with banjo fitting
Page 9.6.001.17
Accessories
FORM CUTTER
39 0500
36 0509
39 0501
36 0520
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.06
Page 9.6.001.08
Page 9.6.001.17
UNIVERSAL TUBING
SLEEVE
TUBING SLEEVE
TUBING NUT
FOLDED COPPER
WASHER
48 0213
‘O’ RING SEAL
Page 9.6.001.18
Page 9.6.001.18
36 0501
Page 9.6.001.18
06/97
36 0502
Page 9.6.001.18
36 0500
Page 9.6.001.18
34 0156
48 0314
Page 9.6.001.17
48 0261
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.03
Compression Fittings
Metric
Assembly Details
Tubing Nut
Tubing Sleeve
Body
Tube Stop
Method of Assembly
1. Ensure that the tube is cut
square and is free from
fraze.
2. Place the tubing nut and
sleeve on the tube and push
the tube into the fitting until
it bottoms on the tube stop.
3. Holding the tube firmly in
contact with the tube stop
screw the tubing nut down
finger tight and then tighten
a further 1-13/4 full turns.
Slacken off the assembly
and then pinch down again.
The method of preparation and assembly described will ensure leak-proof joints over a wide pressure range, depending upon the size and type of
tubing being used. Failure to follow this guide, or over-tightening at any joint, will only lead to damage of the fittings or an unsatisfactory seal.
Instructions For Machining
Where for some reason, such as saving overall space, it is desired to dispense with the male adaptor and fit a tube, complete with its associated nut
and sleeve, direct into a casting, this may be done as illustrated below, by machining the correct form and thread with the appropriate size of form
cutter and tap.
1. DRILL
It is difficult to recommend specific
drill sizes to suit our range of form
cutters and taps without having
detailed knowledge of the material
to be machined and details of the
particular installation.
As a general rule, however, when
preparing for an Enots
compression assembly, a drill size
of 1 mm less in diameter than the
tubing size should be used, up to
and including 8 mm tube. For larger
tubing, a drill of approximately 2
mm less in diameter is
recommended.
2. FORM
3. TAP
4. ASSEMBLY
The correct form cutter
should be selected from the
table overleaf for the outside
diameter tubing being used.
The correct size thread tap
should be selected from the
table overleaf for the outside
diameter tubing being used.
Owing to the fine pitch of the
threads used, only a plug tap
is required.
The tube, or stem fittings,
with appropriate tubing nut
and sleeve, can now be
assembled into the port.
We can advise on individual problems but we cannot be held responsible for failures due to non-observance of the dimensions and tolerances
which we lay down for these compression unions.
N/AL 9.6.001.04
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Torque Figures
Metric
Recommended torque using 36 0501 00 series sleeves
O.D.
tube
Half
hard
copper
4,5 Nm
6,8 Nm
9,0 Nm
11,3 Nm
21,5 Nm
24,9 Nm
34,0 Nm
46,0 Nm
52,0 Nm
79,0 Nm
76,0 Nm
4
5
6
8
10
12
15
16
18
22
28
Annealed
copper
Nylon
11 & 12
Double Wall
Brazed Steel
3,4 Nm
5,7 Nm
7,9 Nm
7,9 Nm
18,1 Nm
22,6 Nm
28,0 Nm
31,0 Nm
35,0 Nm
68,0 Nm
68,0 Nm
2,8 Nm
5,7 Nm
5,7 Nm
7,9 Nm
13,6 Nm
15,8 Nm
25,0 Nm
26,0 Nm
45,0 Nm
46,0 Nm
96,0 Nm
5,7 Nm
10,2 Nm
12,4 Nm
21,5 Nm
27,1 Nm
-
Conversion: Nm x 0,74 = lbf ft
Typical Dimensions
Hose stem to tube with reducing connector
W
F
O.D.
tube
V
A
F
W
4
5
6
8
10
12
15
16
18
22
28
A
thread
details
M8 x 1,0
M10 x 1,0
M11 x 1,0
M13 x 1,0
M15 x 1,0
M18 x 1,5
M22 x 1,5
M24 x 1,5
M26 x 1,5
M30 x 1,5
M38 x 1,5
F
V
W
10,5
12,0
12,0
15,0
16,5
17,0
18,5
19,0
20,0
24,5
30,0
8,3
9,5
9,4
11,7
12,7
13,4
16,0
16,2
17,0
20,5
25,8
6,0
6,5
7,0
8,0
8,0
9,0
10,0
10,5
10,5
11,0
12,5
A
= outside diameter tube size and thread details.*
F
= tube or stem length inside fitting.
V
= nippled connector length inside fitting.
W = projection of tubing nut from compression joint.
All these dimensions are common to a particular tubing outside diameter size. Refer to
later pages in this section for details of individual coupling dimensions. Dimensions V & W
will vary with the torque applied so these dimensions are guidance only.
*Note: The ‘O/D tube’ sizes in the following tables refer to the Enots compression
threads listed above.
06/97
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.05
Compression Fittings
Metric
Form Cutter
Tap
F
A
O/D
tube
4
5
6
8
10
12
16
22
28
39 0500 02
39 0500 03
39 0500 04
39 0500 05
39 0500 06
39 0500 07
39 0500 08
39 0500 10
39 0500 12
D
D
F
K
Product
number
48
48
48
48
48
48
48
48
48
10,5
12,0
12,0
15,0
16,5
17,0
19,0
24,5
30,0
12,7
12,7
12,7
12,7
12,7
12,7
20,0
20,0
20,0
39 0501 02
39 0501 03
39 0501 04
39 0501 05
39 0501 06
39 0501 07
39 0501 08
39 0501 10
39 0501 12
A
A
ØK
Product
number
Plug taps only available
Tubing Plug
Stem Tailpiece Adaptor
Male O/D tube thread
O/D tube stem to hose
D
E
A/F
8
10
13
13
17
19
22
24
27
30
41
C
15,3
17,0
17,0
19,5
21,0
23,5
26,5
27,0
29,0
33,5
41,5
Product
number
L
ØS
D
A
A
O/D
tube
4
5
6
8
10
12
15
16
18
22
28
36 0509 02
36 0509 03
36 0509 04
36 0509 05
36 0509 06
36 0509 07
36 0509 15
36 0509 08
36 0509 18
36 0509 10
36 0509 12
E
A
Product
number
For
O/D
tube
4
5
6
8
10
12
16
22
28
D
A
O/D
stem
4
5
6
8
10
12
16
22
28
36 0524 15
36 0524 16
36 0524 24
36 0524 25
36 0524 42
36 0524 43
36 0524 53
36 0524 67
36 0524 83
A
thread
M8 x 1,0
M10 x 1,0
M11 x 1,0
M13 x 1,0
M15 x 1,0
M18 x 1,5
M24 x 1,5
M30 x 1,5
M38 x 1,5
C
hose
bore
5,0
5,0
6,3
6,3
10,0
10,0
12,5
19,0
25,0
Female Tailpiece Adaptor
Straight Stem Adaptor
Tube to hose
O/D tube stem to male parallel BSP thread
L
S
36,5
38,5
40,5
43,5
47,0
49,0
54,8
64,7
76,0
17,5
17,0
17,5
17,5
19,0
19,0
20,0
22,7
24,0
1,9
2,8
4,3
4,3
7,3
7,3
9,7
15,8
21,5
D
L
G
ØM
B
ØS
A
E
C
A
ØS
T
E
D
D
Product
number
36 0522 25
36 0522 43
36 0522 53
A
O/D
tube
8
12
16
C
hose
bore
6,3
10,0
12,5
D
E
A/F
L
S
Product
number
37
41
45
17
22
27
20
22
23
5,5
8,5
10,5
36 0521 03
36 0521 05
36 0521 10
36 0521 11
36 0521 20
36 0521 21
36 0521 31
36 0521 47
36 0521 62
A
O/D
stem
5
8
6
8
10
12
16
22
28
B
BSPP
D
E
A/F
G
M
S
T
1
36
40
42
45
49
51
61
71
85
13
13
19
19
24
24
27
36
41
7,4
7,4
11,0
11,0
11,4
11,4
15,0
16,3
19,1
13
13
18
18
22
22
26
32
39
3
5
4
5
7
9
12
18
23
21
26
23
26
28
30
35
42
51
/8"
/8"
1
/4"
1
/4"
3
/8"
3
/8"
1
/2"
3
/4"
1"
1
Sealing washers should be ordered separately, see pages 9.6.001.42 – 43.
N/AL 9.6.001.06
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Straight Stem Adaptor
Nippled Stem Connector
O/D tube stem to male taper BSP thread
Male O/D tube to O/D tube stem
D
T
A1
ØS
B
ØS
A
E
E
G
A
T
D
36 0531 03
36 0531 04
36 0531 05
36 0531 10
36 0531 11
36 0531 12
36 0531 20
36 0531 21
A
O/D
stem
5
6
8
6
8
10
10
12
B
thread
BSPP
D
E
A/F
G
S
T
Product
number
1
35
37
40
42
45
47
49
51
13
13
13
14
14
14
19
19
9,5
9,5
9,5
11,1
11,0
11,1
12,7
12,7
3
4
5
4
5
7
7
9
21
23
26
23
26
28
28
30
36 O625 03
36 O625 04
36 O625 05
36 O625 06
36 O625 07
/8"
/8"
1
/8"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
1
A1
O/D
stem
5
6
8
10
12
A
O/D
tube
5
6
8
10
12
Female O/D tube
A1
A
E
D
06/97
36 0517 26
36 0517 27
36 0517 28
36 0517 37
36 0517 38
36 0517 39
36 0517 40
36 0517 41
36 0517 47
36 0517 48
36 0517 49
37 0517 57
36 0517 50
36 0517 56
36 0517 57
36 0517 58
36 0517 64
37 0517 61
36 0517 65
36 0517 71
36 0517 73
36 0517 75
36 0517 78
36 0517 80
36 0517 87
A1
O/D
tube
5
6
8
6
8
10
12
16
8
10
12
15
16
10
12
16
12
15
16
16
22
28
22
28
28
A
O/D
tube
4
4
4
5
5
5
5
5
6
6
6
6
6
8
8
8
10
10
10
12
12
12
16
16
22
D
E
A/F
S
20,0
16,0
19,5
22,0
19,5
21,0
23,5
27,0
25,0
21,0
23,5
26,5
27,0
27,5
23,5
27,0
31,0
27,0
27,0
27,0
33,5
41,5
33,5
41,5
41,5
10
13
13
13
13
17
19
24
13
17
19
22
24
17
19
24
19
22
24
24
30
41
30
41
41
2,8
2,8
2,8
3,4
3,4
3,4
3,4
3,4
4,0
4,0
4,0
6,0
4,0
6,0
6,0
6,0
7,6
6,0
7,6
9,6
9,6
9,6
13,6
13,6
19,0
A
ØS
Product
number
E
A/F
S
T
38,0
40,0
45,5
49,0
53,5
10,0
13,0
13,0
17,0
19,0
3,0
4,0
5,0
7,0
9,0
21,0
23,0
26,0
28,0
30,0
ØS
Bulkhead Connector
Female O/D tube to male O/D tube
E
Reducing Connector
D
P
Product
number
N
G
D
Product
number
36 0508 02
36 0508 03
36 0508 04
36 0508 05
36 0508 06
36 0508 07
36 0508 08
36 0508 10
36 0508 12
A
O/D
tube
4
5
6
8
10
12
16
22
28
D
E
A/F
G
23
26
26
32
35
36
41
53
64
17
19
19
22
24
30
36
46
55
18
20
20
26
29
30
35
44
54
N
max.
bulkhead
12
13
13
19
20
21
25
33
42
P
thread
S
Bulkhead
clearance
drilling
M12 x 1,0 2,8 13
M15 x 1,0 3,4 16
M15 x 1,0 4,0 16
M18 x 1,5 6,0 19
M20 x 1,5 7,6 21
M24 x 1,5 9,6 25
M30 x 1,5 13,6 32
M38 x 1,5 19,0 40
M48 x 1,5 25,0 50
Locknut
number
36052001
36052003
36052003
36052005
36052006
36052007
36052008
36052010
36052012
Minimum Bulkhead thickness 3,0.
Locknuts should be ordered separately, see next page.
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.07
Compression Fittings
Metric
Nippled Connector
Bulkhead Locknut
Male O/D tube
Product
number
P
thread
D
E
A/F
36 0520 01
36 0520 03
36 0520 05
36 0520 06
36 0520 07
36 0520 08
36 0520 10
36 0520 12
M12 x 1,0
M15 x 1,0
M18 x 1,5
M20 x 1,5
M24 x 1,5
M30 x 1,5
M38 x 1,5
M48 x 1,5
5
6
6
7
7
8
9
10
17
22
24
27
30
41
46
55
Product
number
E
36 0632 02
36 0632 03
36 0632 04
36 0632 05
36 0632 06
36 0632 07
A
E
ØS
D
P
D
Female O/D tube to male O/D tube
36 0737 01
M5 x 0,8 15
E
G
A/F
S
7
2
5
ØS
Sealing washers should be ordered separately,
quote: 48031400.
Product
number
A1
D
36 0562 26
36 0562 27
36 0562 28
36 0562 37
36 0562 38
36 0562 47
36 0562 48
36 0562 56
36 0562 57
36 0562 64
ØS
A
thread
A
Product
number
E
A
A
Unequal Connector
Male to male
E
Male Connector
G
D
D
Straight Connector
Bracketed Straight Connector
Female O/D tube
Female O/D tube
A
O/D
tube
4
5
6
8
10
12
A1
O/D
tube
4
4
4
5
5
6
6
8
8
10
D
E
A/F
S
28,0
31,4
31,4
36,0
39,0
43,5
8
10
13
13
17
19
2,2
3,0
4,0
5,4
7,0
9,0
A
O/D
tube
5
6
8
6
8
8
10
10
12
12
D
E
A/F
S
26
26
29
26
30
30
33
35
35
36
13
13
17
13
17
17
19
19
22
22
2,0
2,0
2,0
2,0
3,0
4,0
4,0
5,2
5,2
7,5
R
A
ØS
ØK
D1
ØS
A
E
ØQ
D
D
Product
number
36 0503 02
36 0503 03
36 0503 04
36 0503 05
36 0503 06
36 0503 07
36 0503 15
36 0503 08
36 0503 18
36 0503 10
36 0503 12
A
O/D
tube
4
5
6
8
10
12
15
16
18
22
28
N/AL 9.6.001.08
D
E
A/F
S
Product
number
22,0
26,0
26,0
32,0
35,0
36,0
40,0
41,0
43,5
53,0
64,0
10
13
13
17
19
22
27
27
32
36
46
2,8
3,4
4,0
6,0
7,6
9,6
12,6
13,6
15,3
19,0
25,0
36 0552 02
36 0552 03
36 0552 04
36 0552 05
36 0552 06
36 0552 07
A
O/D
tube
4
5
6
8
10
12
D
D1
K
Q
R
S
24,0
27,0
27,0
33,3
35,0
37,0
14,9
22,2
22,2
24,6
25,4
29,4
10,3
14,3
14,3
17,5
23,8
23,8
5,2 x 11,9
6,75 x 15,9
6,75 x 15,9
6,75 x 19,0
6,75 x 25,4
6,75 x 25,4
5,5
8,7
8,7
9,5
11,1
11,1
3,0
4,0
4,5
6,5
8,0
10,0
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Metric to Inch Adaptor
Nippled Adaptor
Inch O/D tube male to metric O/D tube female
Male tube to metric and UNF female thread
D
E
A/F
S
10
10
10
13
13
13
13
17
17
19
22
30
30
36
36
46
1,6
2,4
2,8
2,8
2,8
2,8
3,2
3,2
6,0
6,3
9,6
13,6
13,6
16,0
19,0
25,0
E
Y
AB
A1 D
O/D
tube
1
/8" 18,5
5
/32" 17,5
3
/16" 22,0
3
/16" 24,0
3
/16" 27,0
1
/4" 20,0
1
/4" 23,5
1
/4" 25,5
5
/16" 25,0
3
/8" 28,0
1
/2" 32,0
5
/8" 34,5
3
/4" 36,0
3
/4" 48,5
11/8" 45,0
19,0 54,0
A
A
O/D
tube
4
4
4
5
6
4
6
8
8
10
12
16
16
22
22
28
ØS
36 0562 02
36 0562 09
36 0562 15
36 0562 16
36 0562 17
36 0562 22
36 0562 24
36 0562 25
36 0562 32
36 0562 42
36 0562 52
36 0562 59
36 0562 65
36 0562 67
36 0562 73
36 0562 79
E
A
A1
ØS
Product
number
D
Product
number
36 0553 30
36 0553 43
36 0553 53
36 0643 53
A1
O/D
tube
6
6
6
4
AB
thread
D
E
A/F
S
V
M8 x 1,0
M10 x 1,0
M14 x 1,4
10 - 32 UNF
21,5
26,0
27,5
15,0
13,0
14,0
19,0
8,0
4,0
4,0
4,0
2,2
8,0
11,0
11,0
7,0
G
G
D
D
Product
number
36 0556 02
36 0556 03
36 0556 04
36 0556 05
36 0556 08
36 0556 09
36 0556 10
36 0556 11
36 0556 12
36 0556 19
36 0556 20
36 0556 21
36 0556 30
06/97
A
O/D
tube
4
5
6
8
4
5
6
8
10
8
10
12
12
B
thread
BSP
D
E
A/F
G
S
Product
number
1
26,0
27,5
27,5
30,0
28,5
30,0
30,0
32,0
33,5
37,0
38,0
40,0
44,0
13
13
13
14
14
14
14
14
17
19
19
19
22
9,5
9,5
9,5
9,5
11,1
11,1
11,1
11,1
11,1
12,7
12,7
12,7
15,9
2,2
3,0
4,0
5,0
2,2
3,0
4,0
5,4
6,4
5,4
7,0
9,0
9,0
36 0557 02
36 0557 03
36 0557 04
36 0557 05
36 0557 08
36 0557 09
36 0557 10
36 0557 11
36 0557 12
36 0557 19
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
1
/2"
1
B
A
B
A
ØS
Male O/D tube to female parallel BSP thread
E
Male O/D tube to male taper BSP thread
ØS
Nippled Adaptor
E
Nippled Adaptor
A
O/D
tube
4
5
6
6
8
10
8
8
12
12
B
thread
BSP
D
E
A/F
G
S
1
24,0
24,5
24,5
28,0
30,0
31,5
30,5
32,0
34,0
39,5
13
13
13
17
17
17
22
22
22
27
7,5
7,5
7,5
11,0
11,0
11,0
11,5
11,5
11,5
15,0
2,2
3,0
4,0
4,0
5,4
7,0
5,4
7,0
9,0
9,0
/8"
/8"
1
/8"
1
/4"
1
/4"
1
/4"
3
/8"
1
/4"
3
/8"
1
/2"
1
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.09
Compression Fittings
Metric
Straight Male Adaptor
Straight Male Adaptor (NPTF)
Female O/D tube to male taper BSP thread
Female O/D tube to male NPTF thread
G
D
B
D
E G
A/F
thread
S
Product
number
/8"
1
/8"
1
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
3
/4"
3
/4"
3
/4"
18,5
20,0
20,0
26,5
28,0
18,0
21,6
21,6
23,0
30,0
31,1
21,0
21,0
26,0
29,0
35,0
25,0
27,0
30,0
31,0
38,5
33,0
35,0
35,0
13
13
14
17
19
14
14
14
17
19
22
19
19
19
22
30
22
22
22
27
30
30
30
32
9,5 2,8
9,5 3,4
9,5 4,0
9,5 4,7
9,5 4,7
11,11 2,8
11,11 3,4
11,11 4,0
11,11 6,0
11,11 7,0
11,11 6,4
12,7 4,0
12,7 6,0
12,7 8,0
12,7 9,6
12,7 10,0
15,9 6,0
15,9 8,0
15,9 10,0
15,9 12,6
15,9 13,6
19,5 10,0
19,1 13,6
19,0 15,3
B
1
ØS
BSP
E
36 0530 02
36 0530 03
36 0530 04
36 0530 05
36 0530 06
36 0530 08
36 0530 09
36 0530 10
36 0530 11
36 0530 12
36 0530 13
36 0530 18
36 0530 19
36 0530 20
36 0530 21
36 0530 22
36 0530 28
36 0530 29
36 0530 30
37 0530 57
36 0530 31
36 0530 44
36 0530 45
37 0530 62
A
O/D
tube
4
5
6
8
10
4
5
6
8
10
12
6
8
10
12
16
8
10
12
15
16
12
16
18
A
B
E
A
ØS
Product
number
G
D
36 0532 03
36 0532 04
36 0532 05
36 0532 09
36 0532 10
36 0532 11
36 0532 12
36 0532 13
36 0532 19
36 0532 20
36 0532 21
36 0532 29
36 0532 30
36 0532 31
Straight Male Adaptor
Male Adaptor
Female O/D tube to metric male thread
Male metric to male taper BSP thread
36 0554 10
36 0554 20
36 0554 21
36 0554 31
36 0554 32
36 0554 42
36 0554 43
36 0554 54
36 0554 65
A1
O/D
tube
4
5
5
6
6
8
8
10
12
D
E G
A/F
S
19,0
20,0
26,5
22,0
22,5
26,0
33,0
34,0
23,0
27,0
31,0
26,0
31,0
40,0
13
14
17
14
14
17
19
22
19
19
22
24
24
30
3,4
4,0
4,7
3,4
4,0
6,0
7,6
8,0
6,0
7,6
9,6
7,6
9,6
12,0
thread
NPTF
1
/8"
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
/2"
1
9,5
9,5
9,5
14,3
14,3
14,3
14,3
14,3
14,3
14,3
14,3
19,0
19,0
19,0
G
E
B
ØS
A
AB
G
D
Product
number
B
ØM
ØS
A
E
G1
A
O/D
tube
5
6
8
5
6
8
10
12
8
10
12
10
12
16
D
AB
thread
D
E
A/F
G
M
S
Product
number
A1
thread
AB
BSPT
thread
D
E
G
G1
S
M8 x 1,0
M8 x 1,0
M10 x 1,0
M10 x 1,0
M12 x 1,0
M12 x 1,0
M12 X 1,5
M14 X 1,5
M16 X 1,5
19
21
20
20
20
25
26
28
28
13
13
14
17
17
17
17
19
22
8,1
8,0
8,0
8,1
8,1
8,1
10,0
10,1
10,1
12,0
12,0
13,5
14,0
16,5
16,5
16,5
18,5
21,0
2,8
3,0
3,4
4,0
4,0
5,0
5,5
6,0
7,6
36 0738 02
M5 x 0,8
1
20
10
9,5
5,0
2,0
N/AL 9.6.001.010
/8"
Sealing washers should be ordered separately, quote 48031400.
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
G
G
D
D
Product
number
36 0504 02
36 0504 03
36 0504 04
36 0504 05
36 0504 08
36 0504 09
36 0504 10
36 0504 11
36 0504 12
36 0504 13
36 0504 18
36 0504 19
36 0504 20
36 0504 21
36 0504 22
36 0504 28
36 0504 29
36 0504 30
36 0504 31
36 0504 33
36 0504 45
36 0504 47
36 0504 49
36 0504 60
36 0504 62
A
O/D
tube
4
5
6
8
4
5
6
8
10
12
6
8
10
12
16
8
10
12
16
22
16
22
28
22
28
B
ØS
A
E
B
A
ØM
Female O/D tube to female parallel BSP thread
ØS
Straight Adaptor
Female O/D tube to male parallel BSP thread
E
Straight Male Adaptor
B
thread
BSP
D
E
A/F
G
M
S
Product
number
1
15
18
21
25
18
20
21
25
30
30
22
23
24
29
34
25
25
27
36
44
32
43
53
42
52
13
13
17
17
19
19
19
19
19
22
22
24
24
24
27
27
27
27
27
36
36
36
46
41
46
7,4
7,4
7,4
7,4
11,0
11,0
11,0
11,0
11,0
11,0
11,4
11,4
11,4
11,4
11,4
15,0
15,0
15,0
15,0
15,0
16,3
16,3
16,3
19,1
19,1
13
13
14
14
18
18
18
18
18
18
21,5
22
22
22
22
26
26
26
26
26
32
32
32
39
39
2,8
3,4
4,0
5,0
2,8
3,4
4,0
6,0
7,0
7,0
4,0
6,0
7,6
9,6
10,0
6,0
7,6
9,6
13,6
13,6
13,6
19,0
19,0
19,0
25,0
36 0505 02
36 0505 03
36 0505 04
36 0505 05
36 0505 09
36 0505 10
36 0505 11
36 0505 12
36 0505 19
36 0505 20
36 0505 21
36 0505 30
36 0505 31
36 0505 47
36 0505 62
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
3
/4"
3
/4"
3
/4"
1"
1"
1
A
O/D
tube
4
5
6
8
5
6
8
10
8
10
12
12
16
22
28
B
thread
BSP
D
E
A/F
G
S
1
23
25
25
28
27
27
30
31
32
33
33,5
37
38
48
55
13
13
13
17
17
17
17
19
22
22
22
27
30
36
46
9,5
9,5
9,5
9,5
11,0
11,0
11,0
11,0
12,7
12,7
12,7
16,0
16,0
17,5
19,0
2,8
3,4
4,0
6,0
3,4
4,0
6,0
7,6
6,0
7,6
9,6
9,6
13,6
19,0
25,0
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
3
/4"
1"
1
Sealing washers should be ordered separately, see pages 9.6.001.42–43.
Universal Stem Elbow
Stem Elbow Connector
O/D tube stem
Female O/D tube to O/D tube stem
J
J
K
S
Product
number
J
A
A1 J
O/D O/D
J1
K
S
29,5
30,6
34,9
41,3
43,5
53,0
14,3
14,3
17,5
23,0
23,0
30,0
3
4
5
7
9
12
tube stem
11,1
5,0
ØK
31,8
J1
J
A
K
36 0292 05
A
O/D
stem
8
A
Product
number
36 0551 03
36 0551 04
36 0551 05
36 0551 06
36 0551 07
36 0551 08
5
6
8
10
12
16
5
6
8
10
12
16
17
19
23
23
24
30
ØS
ØS
A1
06/97
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.011
Compression Fittings
Metric
Elbow Connector
Bracketed Elbow Connector
Female O/D tube
Female O/D tube
J
J
J
R
A
ØS
ØK
ØS
A
ØK
J
ØQ
R
Product
number
36 0511 02
36 0511 03
36 0511 04
36 0511 05
36 0511 06
36 0511 07
36 0511 15
36 0511 08
36 0511 18
36 0511 10
36 0511 12
A
O/D
tube
4
5
6
8
10
12
15
16
18
22
28
D
E
A/F
S
Product
number
13,5
15,5
16,0
20,0
23,0
25,0
29,0
29,0
32,0
39,0
45,0
11,1
12,7
14,3
16,0
20,0
24,0
27,8
27,8
30,9
36,5
47,6
2,8
3,4
4,0
6,0
7,6
9,6
12,6
13,6
15,3
19,0
25,0
36 0548 02
36 0548 03
36 0548 04
36 0548 05
36 0548 06
36 0548 07
A
O/D
stem
4
5
6
8
10
12
J
K
Q
R
S
13,5
23,8
21,0
26,2
25,4
32,0
10,3
13,5
16,7
16,7
22,2
22,2
5,2 x 11,9
6,75 x 16,7
6,75 x 19,0
6,75 x 19,0
6,75 x 25,4
6,75 x 25,4
7,1
6,7
7,8
7,8
11,2
11,2
3,0
4,0
4,5
6,5
8,0
10,0
Female Elbow Adaptor
Female O/D tube to female parallel BSP thread
G
J1
A
ØK
J
ØS
B
Product
number
36 0555 02
36 0555 03
36 0555 10
36 0555 11
36 0555 12
36 0555 20
36 0555 21
36 0555 22
36 0555 30
36 0555 31
A
O/D
stem
4
5
6
8
10
10
12
16
12
16
B
thread
BSPP
G
J
A/F
J1
K
S
1
7,4
7,4
11,0
11,0
11,0
11,4
11,4
11,4
15,0
15,0
14,0
15,5
16,0
20,0
22,0
21,5
24,5
28,0
24,5
28,0
12,5
12,5
17,5
18,5
18,5
22,0
22,0
22,0
26,0
29,0
12,7
12,7
17,5
17,5
20,6
20,6
23,8
28,5
24,6
28,5
2,8
3,4
4,0
6,0
7,6
7,6
9,6
13,6
9,6
13,6
/8"
/8"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
N/AL 9.6.001.012
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Male Elbow Adaptor
Male Elbow Adaptor
Female O/D tube to male taper BSP thread
Female O/D tube to male NPTF thread
Product
number
36 0005 02
36 0005 03
36 0005 04
36 0005 05
36 0005 08
36 0005 09
36 0005 10
36 0005 11
36 0005 12
36 0005 13
36 0005 18
36 0005 19
36 0005 20
36 0005 21
36 0005 22
36 0005 28
36 0005 29
36 0005 30
37 0005 57
36 0005 31
36 0005 45
37 0005 62
06/97
A
O/D
tube
4
5
6
8
4
5
6
8
10
12
6
8
10
12
16
8
10
12
15
16
16
18
G
G
J1
J1
A
ØK
J
A
ØK
J
ØS
ØS
B
B
K
K
B
thread
BSP
G
J
J1
K
S
Product
number
1
9,5
9,5
9,5
9,5
11,11
11,11
11,11
11,11
11,11
11,11
12,7
12,7
12,7
12,7
12,7
15,9
15,9
15,9
15,9
15,9
19,0
19,1
14,9
16,5
16,5
20,0
15,7
16,5
17,2
20,6
21,0
22,2
18,2
21,8
22,0
24,5
25,8
23,4
24,9
25,4
27,0
28,0
29,0
31,0
15,5
17,0
18,2
20,0
19,8
19,8
19,0
21,0
23,0
25,0
24,0
24,0
24,0
26,0
28,0
28,5
28,5
33,0
32,0
32,0
34,5
37,5
11,1
12,7
14,3
15,9
14,3
14,3
14,3
15,9
20,6
23,8
17,4
17,4
20,6
23,8
28,6
23,8
23,8
28,6
28,6
28,6
28,6
31,8
4,7
4,7
4,7
4,7
6,3
6,3
6,3
6,3
6,3
6,3
9,6
9,6
9,6
9,6
9,6
12,7
12,7
12,6
12,7
12,7
17,5
17,5
36 0331 03
36 0331 04
36 0331 05
36 0331 09
36 0331 10
36 0331 11
36 0331 12
36 0331 13
36 0331 20
36 0331 21
36 0331 30
36 0331 31
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
3
/4"
3
/4"
1
A
O/D
tube
5
6
8
5
6
8
10
12
10
12
12
16
B
NPTF
thread
G
J
J1
K
S
1
9,5
9,5
9,5
14,3
14,3
14,3
14,3
14,3
14,3
14,3
19,1
19,1
16,5
16,5
20,0
17,2
17,2
20,6
22,0
23,0
23,5
24,5
26,0
27,0
17,4
18,2
20,0
24,6
24,6
24,6
27,0
28,6
27,0
28,6
35,0
35,0
12,7
14,3
15,9
15,9
25,9
15,9
20,6
24,5
20,6
24,5
28,6
28,6
4,7
4,7
4,7
6,3
6,3
6,3
6,3
6,3
9,6
9,6
12,7
12,7
/8"
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
1
/2"
1
/2"
1
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.013
Compression Fittings
Metric
Stem Tee Connector
90° Stem Tee Connector
Female O/D tube to O/D tube stem
Female O/D tube to O/D tube stem
J
90°
A
ØK
A
ØK
J
J
Product
number
36 0550 03
36 0550 04
36 0550 05
36 0550 06
36 0550 07
36 0550 08
36 0550 10
36 0550 12
A
O/D
tube
5
6
8
10
12
16
22
28
J1
J1
J
ØS
ØS
A1
A1
A1
O/D
stem
5
6
8
10
12
16
22
28
J
J1
K
S
Product
number
14,5
16,8
18,5
21,0
22,5
27,5
38,0
45,0
29,5
30,6
34,9
41,3
43,5
55,0
60,0
75,0
14,3
14,3
17,5
23,3
23,0
35,0
35,0
45,0
3
4
5
7
9
12
18
23
36 0631 03
36 0631 04
36 0631 05
36 0631 06
36 0631 07
A
O/D
tube
5
6
8
10
12
A1
O/D
stem
5
6
8
10
12
Side Stem Tee Connector
Tee Connector
Female O/D tube to O/D tube stem
Female O/D tube
J
J1
K
S
17
19
23
23
25
29,5
30,6
34,9
41,3
43,5
12,3
14,3
17,5
23,2
23,2
3
4
5
7
9
J
A
ØS
A
ØK
A1
J1
J1
J
ØS
J
J
A
A1
ØK
Product
number
36 0626 03
36 0626 04
36 0626 05
36 0626 06
36 0626 07
A
O/D
tube
5
6
8
10
12
N/AL 9.6.001.014
A1
O/D
stem
5
6
8
10
12
J
J1
K
S
Product
number
17
19
23
24
26
29,5
30,6
34,9
41,3
43,5
12,3
14,3
17,5
23,0
23,0
3
4
5
7
9
36 0514 02
36 0514 03
36 0514 04
36 0514 05
36 0514 06
36 0514 07
36 0514 15
36 0514 08
36 0514 18
36 0514 10
36 0514 12
A
O/D
tube
4
5
6
8
10
12
15
16
18
22
28
A1
O/D
stem
4
5
6
8
10
12
15
16
18
22
28
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
J
J1
K
S
12,5
15,5
16,0
20,0
23,0
25,0
28,0
28,0
32,0
39,0
45,0
12,5
15,5
16,0
20,0
23,0
25,0
28,0
28,0
32,0
39,0
45,0
10,3
12,7
14,3
16,0
20,0
24,0
28,6
28,6
31,0
36,5
47,6
2,8
3,4
4,0
6,0
7,6
9,6
12,6
13,6
17,5
19,0
25,0
06/97
Compression Fittings
Metric
Bracketed Tee Connector
Male Tee Adaptor
Female O/D tube
Female O/D tube to male taper BSP thread
J
J
J
J
A
J1
G
J
D
A
ØS
ØK
R
ØK
ØQ
ØS
B
Product
number
36 0549 02
36 0549 03
36 0549 04
36 0549 05
36 0549 06
36 0549 07
A1
O/D
tube
4
5
6
8
10
12
D
J
K
Q
R
S
Product
number
23,2
31,1
31,6
36,4
40,5
42,0
13,5
16,0
16,5
20,5
23,0
24,5
10,3
14,3
14,3
17,5
23,8
23,8
5,20 x 11,9
6,75 x 15,9
6,75 x 15,9
6,75 x 19,0
6,75 x 25,4
6,75 x 25,4
5,5
8,7
8,7
9,5
11,1
11,1
3,0
4,0
4,5
6,5
8,0
9,6
36 0627 03
36 0627 04
36 0627 11
36 0627 12
36 0627 21
A
O/D
tube
5
6
8
10
12
B
thread
BSP
G
J
J1
K
S
1
9,5
9,5
11,1
11,1
12,7
16,5
16,5
21,0
22,0
24,5
17,0
18,0
20,0
23,0
26,0
12,7
14,3
15,9
19,0
23,8
3,5
3,5
6,3
6,3
9,5
/8"
/8"
1
/4"
1
/4"
3
/8"
1
Male Side Tee Adaptor
‘Y’ Connector
Female O/D tube to male taper BSP thread
Female O/D tube
J
J1
45°
45°
B
ØS
J
J1
J2
A
ØK
G
ØS
Product
number
36 0628 03
36 0628 04
36 0628 11
36 0628 12
36 0628 21
06/97
A
O/D
tube
5
6
8
10
12
B
thread
BSP
G
1
9,5
9,5
11,1
11,1
12,7
/8"
/8"
1
/4"
1
/4"
3
/8"
1
J
J1
J2
K
S
A
ØK
15,5
16,0
20,0
23,0
25,0
17,0
18,5
22,0
23,0
27,0
15,5
16,0
20,0
23,0
25,0
12,7
14,3
15,9
19,0
23,8
3,5
4,0
6,0
6,4
9,6
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
Product
number
36 0558 02
36 0558 03
36 0558 04
36 0558 05
36 0558 06
36 0558 07
36 0558 08
36 0558 10
36 0558 12
A
O/D
tube
4
5
6
8
10
12
16
22
28
J
J1
K
S
14,0
15,0
16,0
18,5
20,5
22,0
25,0
32,0
40,0
14
16
17
20
22
24
29
37
45
11,1
12,7
14,3
17,5
23,8
23,8
31,8
35,7
44,5
2,8
3,4
4,0
6,0
7,6
9,6
13,6
19,0
25,0
N/AL 9.6.001.015
Compression Fittings
Metric
Four Way Connector
Connector Block
Female O/D tube
U
J
U
U
J1
J
D1
A
ØS
ØK
D2
J
J
A
ØQ
R
J
R1
D
Product
number
36 0516 02
36 0516 03
36 0516 04
36 0516 05
36 0516 06
36 0516 07
36 0516 08
36 0516 10
36 0516 12
A
O/D
tube
4
5
6
8
10
12
16
22
28
J
K
S
Product
number
13,0
15,5
16,0
20,0
23,0
25,0
28,0
37,0
45,0
14,3
14,3
14,3
17,5
24,0
24,0
30,0
35,0
44,0
2,8
3,4
4,0
6,0
7,6
9,6
13,6
19,0
25,0
36 0202 02
36 0202 03
36 0202 04
36 0202 05
36 0202 06
36 0202 07
D
D1
D2
J
J1
Q
R
R1
U
24
26
32
32
42
46
12
13
16
16
21
23
23
27
27
34
36
38
11,5
13,5
13,5
17,0
18,0
19,0
6,0
6,5
8,0
8,0
10,5
11,5
5,4
5,4
6,5
6,5
8,3
8,3
12
13
16
16
21
23
-
12
13
16
16
21
23
Double Sided Manifold
U
D1
A1
D1
R2
J
J
R2
D2
A
D2
A
U
A
O/D
tube
4
5
6
8
10
12
*Other number of outlets available to special order
Single Sided Manifold
U
No.*
of
outlets
2
2
2
2
2
2
A1
R
U
36 0304 28
36 0304 38
36 0304 49
36 0304 57
36 0304 65
36 0304 71
Inlet
A
O/D
tube
8
8
12
12
16
16
Outlet
A1
O/D
tube
4
5
6
8
10
12
No.
D
of
outlets
D1
D2
J
Q
R
R1
R2
U
Product
number
4
4
4
4
4
4
16
16
23
23
29
29
25
25
31
33
40
40
17
17
20
22
26
26
6,5
6,5
6,5
8,3
8,3
8,3
60
63
76
76
95
105
6
6
6
8
8
8
6
6
6
8
8
8
12
13
16
16
21
23
36 0406 28
36 0406 38
36 0406 49
36 0406 57
36 0406 65
36 0406 71
72
75
88
92
111
121
Manifolds up to 12 outlets can be provided subject to minimum economic production quantity.
N/AL 9.6.001.016
R1
D
D
Product
number
ØQ
R
ØQ
R1
U
Inlet
A
O/D
tube
8
8
12
12
16
16
Outlet
A1
O/D
tube
4
5
6
8
10
12
No.
D
of
outlets
D1
D2
J
Q
R
R1
R2
U
6
6
6
6
6
6
16
16
23
23
29
29
34
34
40
44
53
53
17
17
20
22
26,5
26,5
6,5
6,5
6,5
8,3
8,3
8,3
48
50
60
60
74
82
6
6
6
8
8
8
6
6
6
8
8
8
12
13
16
16
21
23
60
62
72
76
90
98
Manifolds up to 12 outlets can be provided subject to minimum economic production quantity.
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Hobbs Couplings
Hobbs Elbow Adaptor
The design of a Hobbs coupling allows the fittings to be screwed into a parallel BSP tapping
and accurately located for position in both height and direction before it is secured with the
special coned locknut and polyurethane seal. Wring locknut down metal to metal to create
an effective seal.
Female O/D tube to male parallel BSP thread
E
B
B1
ØS
ØM
G
J1
Male parallel BSP thread both ends.
A
ØK
Hobbs Straight Connector
J
ØS
B
G1
G
K
D
Product
number
B
thread
BSP
B1
thread
BSP
D
E
A/F
G
G1
M
S
Product
number
36 0543 01
36 0543 02
36 0543 03
36 0543 04
36 0543 06
36 0543 08
36 0543 11
36 0543 20
36 0543 28
36 0543 36
36 0543 47
1
1
1
1
27,0
35,5
40,0
48,0
52,5
64,0
31,5
39,0
44,0
51,0
61,0
13
19
24
27
36
41
17
19
24
27
36
14,0
17,5
20,0
23,0
25,4
31,8
17,5
20,0
23,0
25,4
31,8
14,0
17,5
20,0
23,0
25,4
31,8
17,5
20,0
23,0
25,4
31,8
13
18
22
26
32
39
14
18
22
26
32
5,0
7,0
10,0
13,6
19,0
25,0
5,0
7,0
10,0
13,6
19,0
36 0541 02
36 0541 03
36 0541 04
36 0541 05
36 0541 08
36 0541 09
36 0541 10
36 0541 11
36 0541 12
36 0541 13
36 0541 18
36 0541 19
36 0541 20
36 0541 21
36 0541 22
36 0541 28
36 0541 29
36 0541 30
36 0541 31
36 0541 33
36 0541 45
36 0541 47
36 0541 49
36 0541 60
36 0541 62
/8"
/4"
3
/8"
1
/2"
3
/4"
1"
1
/4"
3
/8"
1
/2"
3
/4"
1"
/8"
/4"
3
/8"
1
/2"
3
/4"
1"
1
/8"
1
/4"
3
/8"
1
/2"
3
/4"
Hobbs Coned Locknut
A
O/D
tube
4
5
6
8
4
5
6
8
10
12
6
8
10
12
16
8
10
12
16
22
16
22
28
22
28
B
thread
BSP
G
J
J1
K
S
1
14,0
14,0
14,0
14,0
17,5
17,5
17,5
17,5
17,5
17,5
20,0
20,0
20,0
20,0
20,0
23,0
23,0
23,0
23,0
23,0
25,4
25,4
25,4
32,0
32,0
14,9
16,5
16,5
19,4
15,7
17,2
17,2
20,6
21,7
22,2
18,2
21,8
23,3
24,5
25,8
23,4
24,9
25,4
28,0
32,9
29,8
36,5
40,8
38,5
45,0
22,0
22,0
22,0
23,8
25,4
25,4
25,4
27,0
30,1
30,1
30,2
30,2
33,0
33,0
35,0
36,5
36,5
36,5
38,0
42,0
43,7
45,2
49,0
50,8
56,5
11,3
14,3
14,3
15,8
14,3
14,3
14,3
15,8
23,8
23,8
17,4
17,4
20,0
23,8
28,6
23,8
23,8
23,8
28,6
36,5
31,8
36,5
44,5
36,5
44,5
4,7
4,7
4,7
4,7
6,3
6,3
6,3
6,3
6,3
6,3
9,6
9,6
9,6
9,6
9,6
12,7
12,7
12,7
12,7
12,7
17,5
17,5
17,5
24,0
24,0
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
3
/4"
3
/4"
3
/4"
1"
1"
1
Hobbs Seal
D
06/97
B
thread
BSP
D
E
A/F
36 0540 02
36 0540 03
36 0540 04
36 0540 05
36 0540 06
36 0540 07
1
7,0
8,4
9,6
10,9
10,9
13,3
17
19
24
27
32
41
/8"
/4"
3
/8"
1
/2"
3
/4"
1"
1
B
Product
number
ØK
B
E
Female parallel BSP thread
D
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
Product
number
B
thread
BSP
D
E
A/F
34 0156 02
34 0156 03
34 0156 04
34 0156 05
34 0156 06
34 0156 07
1
2
2,5
2,5
2,6
2,6
3,2
12,7
15,9
20,7
24,3
30,2
37,2
/8"
/4"
3
/8"
1
/2"
3
/4"
1"
1
N/AL 9.6.001.017
Compression Fittings
Metric
Hobbs Tee Adaptor
Female O/D tube to male parallel BSP thread
J
G
J1
A
ØK
J
ØS
B
Product
number
36 0542 02
36 0542 03
36 0542 04
36 0542 05
36 0542 08
36 0542 09
36 0542 10
36 0542 11
36 0542 12
36 0542 13
36 0542 18
36 0542 19
36 0542 20
36 0542 21
36 0542 22
36 0542 28
36 0542 29
36 0542 30
36 0542 31
36 0542 33
36 0542 45
36 0542 47
36 0542 49
36 0542 60
36 0542 62
A
O/D
tube
4
5
6
8
4
5
6
8
10
12
6
8
10
12
16
8
10
12
16
22
16
22
28
22
28
B
thread
BSP
G
J
J1
K
S
1
14,0
14,0
14,0
14,0
17,5
17,5
17,5
17,5
17,5
17,5
20,0
20,0
20,0
20,0
20,0
23,0
23,0
23,0
23,0
23,0
25,4
25,4
25,4
32,0
32,0
14,9
16,5
16,5
19,4
15,7
17,2
17,2
20,6
21,7
22,2
19,0
21,8
23,3
24,5
25,8
23,4
24,9
25,4
28,0
32,9
29,8
36,5
40,8
38,5
45,0
22,0
22,0
22,0
23,8
25,4
25,4
25,4
27,0
30,1
30,1
30,2
30,2
33,0
33,0
35,0
36,5
36,5
36,5
38,0
44,0
43,7
45,2
50,0
51,3
56,5
14,3
14,3
14,5
15,8
14,3
14,3
14,3
15,8
23,8
23,8
17,4
17,4
23,8
23,8
28,5
23,8
23,8
23,8
28,5
36,5
31,8
36,5
44,5
36,5
44,5
4,7
4,7
4,7
4,7
6,3
6,3
6,3
6,3
6,3
6,3
9,6
9,6
9,6
9,6
9,6
12,7
12,7
12,7
12,7
12,7
17,5
17,5
17,5
24,0
24,0
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
/2"
1
/2"
1
/2"
3
/4"
3
/4"
3
/4"
1"
1"
1
N/AL 9.6.001.018
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
A
thread
36 0500 02
36 0500 03
36 0500 04
36 0500 05
36 0500 06
36 0500 07
37 0500 15
36 0500 08
37 0500 18
36 0500 10
36 0500 12
M8 x 1,0
M10 x 1,0
M11 x 1,0
M13 x 1,0
M15 x 1,0
M18 x 1,5
M22 x 1,5
M24 x 1,5
M26 x 1,5
M30 x 1,5
M38 x 1,5
B
O/D
tube
4
5
6
8
10
12
15
16
18
22
28
D
E
A/F
H
9,5
10,0
10,5
12,1
13,3
15,7
17,0
17,1
19,5
21,5
24,5
8,0
7,0
8,0
9,0
9,5
10,0
10,0
11,0
12,0
15,0
18,0
8
10
13
13
17
19
22
24
27
30
41
B
B
A
E
H
D
Product
number
ØK
‘O’-Ring Seal
Tubing Nut
ØD
Product
number
A
for BSP
thread
D
K
48 0261 06
48 0261 06
48 0261 06
48 0261 06
48 0261 06
48 0261 06
1
2,1
2,1
2,1
2,5
2,5
2,5
16,0
20,6
23,8
28,6
31,7
34,9
/8"
/4"
3
/8"
1
/2"
5
/8"
3
/4"
1
The ‘O’-ring seals shown on this page are
suitable for use with our metric range of
parallel threaded adaptors.
For ‘A’ thread details refer to page 9.6.001.03.
Folded Copper Washer
Universal Tubing Sleeve
ØA
ØK
ØA
ØK
Suitable for nylon metallic tubing
D
D
Product
number
A
48 0213 01
48 0213 02
48 0213 03
48 0213 04
48 0213 05
48 0213 06
48 0213 07
48 0213 08
48 0213 09
48 0213 27
48 0213 28
48 0213 29
48 0213 30
48 0213 41
48 0213 42
48 0213 43
9,8
13,2
16,7
21,0
23,0
26,5
30,2
33,3
42,0
11,1
12,7
14,3
19,1
8,3
10,3
12,1
Suitable for
BSP
thread
1
/8"
/4"
3
/8"
1
/2"
5
/8"
3
/4"
7
/8"
1"
11/4"
1
-
or metric
thread
M16
M30
M33
M14
M8
M10
M12
D
K
Product
number
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
2,2
1,5
1,5
1,5
1,5
1,5
1,5
1,5
13,5
17,7
21
26,4
28,6
32,4
36,2
38,9
49,9
14,6
17,7
18,5
24,1
12
14
17
36 0501 02
36 0501 03
36 0501 04
36 0501 05
36 0501 06
36 0501 07
37 0501 15
36 0501 08
37 0501 18
36 0501 10
36 0501 12
or imperial
thread
3
/8" x 24TPI
7
/16" x 24TPI
/2" x 24TPI
9
/16" x 24TPI
3
/4" x 24TPI
1
-
Sealing Washers – for use with banjo fitting
A
O/D
tube
4
5
6
8
10
12
15
16
18
10
28
D
K
4,2
5,2
5,5
6,3
7,0
7,7
9,1
9,0
10,1
10,5
13,2
6,4
7,5
8,5
10,5
13,0
15,5
19,5
20,0
23,0
26,5
33,0
D
K
4,6
5,0
5,5
6,3
7,5
7,5
9,0
5,7
6,8
8,0
10,3
12,6
14,9
18,3
Tubing Sleeve
Suitable for metallic tubing only
Material
48 0314 00
48 0314 00
48 0314 00
48 0314 00
48 0314 00
M5
Nylon
Copper
Copper
Copper
Copper
Product
number
Nylon
1
/8"
1
/4"
3
/8"
1
/2"
ØA
Size
ØK
Product
number
D
36 0502 02
36 0502 03
36 0502 04
36 0502 05
36 0502 06
36 0502 07
37 0502 15
A
O/D
tube
4
5
6
8
10
12
15
Copper
06/97
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.019
Compression Fittings
Metric
Elbow Banjo Assembly
Elbow Banjo Assembly
Non Regulating BSPP Bolt
Female O/D tube to male parallel BSP thread
Regulating BSPP Bolt
Female O/D tube to male parallel BSP thread
D
D
E
BS
D1
D1
A
ØS
A
E
F
G
G
F
B
B
Product
number
36 0385 02K
36 0385 03K
36 0385 04K
36 0385 05K
36 0385 10K
36 0385 11K
36 0385 12K
36 0385 19K
36 0385 20K
36 0385 21K
36 0385 29K
36 0385 30K
A
O/D
tube
4
5
6
8
6
8
10
8
10
12
10
12
B
thread
BSPP
D*
1
32
35
35
39
38
42
44
48
49
50
54
56
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
D1
29
29
29
29
33
33
33
41
41
41
49
49
E
A/F
F
14
14
14
14
17
17
17
22
22
22
27
27
8
10
13
13
13
13
17
13
17
19
17
19
G
S
A/F
6,5
6,5
6,5
6,5
7,5
7,5
7,5
10,0
10,0
10,0
14,0
14,0
2,8
3,4
4,0
6,0
4,0
6,0
7,6
6,0
7,6
9,6
7,6
9,6
Product
number
A
O/D
tube
5
8
8
36 0386 03K
36 0386 05K
36 0386 11K
B
thread
BSPP
D*
1
35
39
42
/8"
/8"
1
/4"
1
D1
34
34
36,5
E
A/F
F
14
14
17
10
13
13
G
S
6,5
6,5
7,5
3,4
6,0
6,0
A/F
*This dimension will vary with torque applied and is for guidance only.
Arrow on bolt hexagon indicates free flow direction.
*This dimension will vary with torque applied and is for guidance only.
Tee Banjo Assembly
Elbow Banjo Body
Non Regulating BSPP Bolt
Female O/D tube to male parallel BSP thread
O/D tube
D
D
E
ØS
E
A
ØS
C
A
F
G
D1
A
B
F
B
Product
number
36 0395 03K
36 0395 04K
36 0395 10K
36 0395 11K
36 0395 12K
36 0395 19K
A
O/D
tube
5
6
6
8
10
8
B
thread
BSPP
D*
1
53
54
56
64
68
70
/8"
/8"
1
/4"
1
/4"
1
/4"
3
/8"
1
D1
29
29
33
33
33
41
E
A/F
F
14
14
17
17
17
22
10
13
13
13
17
13
G
S
6,5
6,5
7,5
7,5
7,5
10,0
3,4
4,0
4,0
6,0
7,6
6,0
A/F
*This dimension will vary with torque applied and is for guidance only.
Product
number
A
O/D
tube
36 0384 02K 4
36 0384 03K 5
36 0384 04K 6
36 0384 05K† 8
36 0384 10K 6
36 0384 11K 8
36 0384 12K† 10
36 0384 19K 8
36 0384 20K 10
36 0384 21K 12
36 0384 29K 10
36 0384 30K 12
B
for BSP
bolt
C
D*
E
F
S
1
14,0
14,0
14,0
16,0
16,0
16,0
18,5
20,5
20,5
21,5
22,0
22,0
32
35
35
39
38
42
44
48
49
50
54
56
11,5
13,0
14,0
16,0
14,0
16,0
18,5
17,0
18,5
21,5
18,5
21,5
8
10
13
13
13
13
17
13
17
19
17
19
2,8
3,4
4,0
6,0
4,0
6,0
7,6
6,0
7,6
9,6
7,6
9,6
/8"
/8"
1
/8"
1
/8"
1
/4"
1
/4"
1
/4"
3
/8"
3
/8"
3
/8"
1
/2"
1
/2"
1
*This dimension will vary with torque applied and is for guidance only.
† To double stack these bodies order longer bolts 36 0452 11K or
36 0452 12K, see below.
N/AL 9.6.001.020
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
06/97
Compression Fittings
Metric
Banjo Bolts – Regulating
Tee Banjo Body
O/D tube
Regulating Out
Male parallel BSP thread
D
A
A
C
F
Product
number
A
O/D
tube
36 0394 03K 5
36 0394 04K 6
36 0394 10K 6
36 0394 11K 8
36 0394 12K† 10
36 0394 19K 8
B
thread
BSP
D1
E
A/F
39 0461 01K
39 0461 02K
39 0461 03K
39 0461 04K
1
34
37
52
58
14
17
22
27
/8"
/4"
3
/8"
1
/2"
1
Regulating In
Male parallel BSP thread
B
for BSP
bolt
C
D*
E
F
S
1
14,0
14,0
16,0
16,0
18,5
20,5
53
54
56
64
68
70
13,0
14,0
14,0
16,0
18,5
17,0
10
13
13
13
17
13
3,4
4,0
4,0
6,0
7,6
6,0
/8"
1
/8"
1
/4"
1
/4"
1
/4"
3
/8"
Product
number
ØS
E
B
Product
number
B
thread
BSP
D1
E
A/F
39 0460 01K
39 0460 02K
39 0460 03K
39 0460 04K
1
34
37
52
58
14
17
22
27
/8"
/4"
3
/8"
1
/2"
1
Bi-Directional Flow
Male parallel BSP thread
* This dimension will vary with torque applied and is for guidance only.
† To double stack this body order longer bolt 36 0452 12K, see below.
Product
number
B
thread
BSP
D1
E
A/F
39 0459 01K
39 0459 01K
39 0459 01K
39 0459 01K
1
34
37
52
58
14
17
22
27
/8"
/4"
3
/8"
1
/2"
1
All banjo bolts supplied complete with sealing
washers. Arrow on bolt hexagon indicates
free flow direction.
Banjo Bolts - Non Regulating
Single stacking
Male parallel BSP thread
Double stacking
Male parallel BSP thread
D1
E
ØS
36 0451 01K
36 0451 02K
36 0451 03K
36 0451 04K
B
D1
thread
BSP
1
/8"
29
1
/4"
33
3
/8"
41
1
/2"
49
E
A/F
S
14
17
22
27
4,5
5,5
9,2
10,5
Product
number
E
D1
Product
number
All banjo bolts supplied complete with
sealing washers.
B
ØS
36 0452 01K
36 0452 02K
36 0452 03K
36 0452 04K
36 0452 11K*
36 0452 12K*
B
D1
thread
BSP
1
/8"
44,0
1
/4"
50,0
3
/8"
62,5
1
/2"
74,0
1
/8"
47,5
1
/4"
55,0
E
A/F
S
14
17
22
27
14
17
4,5
5,5
9,2
10,5
4,5
5,5
*To be used only with bodies marked †,
see tables above.
B
Warning
These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can
exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not
within published specifications, consult Norgren.
Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be
adequately provided.
System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products
where applicable.
06/97
Our policy is one of continuous research and development. We therefore reserve the right
to amend, without notice, the specifications given in this document.
N/AL 9.6.001.021