STP2NK90Z - STD2NK90Z STD2NK90Z-1 N-channel 900V - 5Ω - 2.1A - TO-220 /DPAK/IPAK Zener-Protected SuperMESH™ MOSFET General features Type VDSS RDS(on) (@Tjmax) ID PW STD2NK90Z 900V <6.5Ω 2.1A 70W STD2NK90Z-1 900V <6.5Ω 2.1A 70W STP2NK90Z 900V <6.5Ω 2.1A 70W ■ Extremely high dv/dt capability ■ Improved esd capability ■ 100% avalanche rated ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Very good manufacturing repeatibility 3 3 1 1 2 TO-220 DPAK 3 2 1 IPAK Internal schematic diagram Description The SuperMESH™ series is obtained through an extreme optimization of ST’s well established stripbased PowerMESH™ layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmesh™ products. Applications ■ Switching application Order codes Part number Marking Package Packaging STD2NK90ZT4 D2NK90Z DPAK Tape & reel STD2NK90Z-1 D2NK90Z IPAK Tube STP2NK90Z P2NK90Z TO-220 Tube July 2006 Rev 4 1/18 www.st.com 18 Contents STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 2 Protection features of gate-to-source zener diodes . . . . . . . . . . . . . . . . . . 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 Electrical characteristics (curves) ............................ 7 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value STD2NK90Z STP2NK90Z VDS Unit STD2NK90Z-1 Drain-source voltage (VGS = 0) 900 V Drain-gate voltage (RGS = 20 kΩ) 900 V Gate- source Voltage ± 30 V ID Drain current (continuous) at TC = 25°C 2.1 A ID Drain current (continuous) at TC = 100°C 1.3 A Drain current (pulsed) 8.4 A Total dissipation at TC = 25°C 70 W Derating factor 0.56 W/°C VESD(G-S) Gate source ESD(HBM-C=100pF, R=1.5KΩ) 2000 V dv/dt (2) Peak diode recovery voltage slope 4.5 V/ns -55 to 150 -55 to 150 °C °C VDGR VGS IDM (1) PTOT Tj Tstg Operating junction temperature Storage temperature 1. Pulse width limited by safe operating area 2. ISD ≤2.1A, di/dt ≤200A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX. Table 2. Symbol Thermal data Value Unit Rthj-case Thermal resistance junction-case max 1.78 °C/W Rthj-amb Thermal resistance junction-ambient max Tl Maximum lead temperature for soldering purpose 62.5 300 °C/W °C Value Unit Table 3. Symbol Parameter Avalanche characteristics Parameter IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 2.1 A EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 150 mJ 3/18 Electrical ratings Table 4. Symbol BVGSO 1.1 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Gate-source zener diode Parameter Gate-source breakdown voltage Test conditions Min. Igs=± 1mA (open drain) 30 Typ. Max. Unit V Protection features of gate-to-source zener diodes The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. 4/18 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 2 Electrical characteristics Electrical characteristics (TCASE=25°C unless otherwise specified) Table 5. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown Voltage Test condictions ID = 1 mA, VGS = 0 Zero gate voltage Drain current (VGS = 0) IGSS Gate-body Leakage current (VDS = 0) VGS = ± 20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 50 µA RDS(on Static drain-source on resistance VGS = 10 V, ID = 1.05 A Symbol gfs (1) Ciss Coss Crss Qg Qgd Max. Unit 900 V 1 50 µA µA ± 10 µA 3.75 4.5 V 5 6.5 Ω Typ. Max. Unit VDS = Max Rating, TC = 125°C 3 Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Coss eq(2). Equivalent output capacitance Qgs Typ. VDS = Max Rating IDSS Table 6. Min. Total gate charge Gate-source charge Gate-drain charge Test condictions Min. VDS = 15 V , ID = 1.05 A VDS = 25 V, f = 1 MHz, VGS = 0 VGS = 0 V, VDS = 0 to 720 V VDD = 720 V, ID = 2 A, 2.3 S 485 50 10 pF pF pF 24 pF 19.5 3.4 10.8 VGS = 10 V (see Figure 22) 27 nC nC nC 1. Pulsed: pulse duration=300µs, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS inceases from 0 to 80% VDSS Table 7. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test condictions VDD = 450 V, ID = 1 A, RG = 4.7 Ω, VGS = 10 V (see Figure 19) Min. Typ. 21 11 43 40 Max. Unit ns ns ns ns 5/18 Electrical characteristics Table 8. Symbol STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Source drain diode Max Unit Source-drain current 2.1 A ISDM(1) Source-drain current (pulsed) 8.4 A VSD(2) Forward on voltage ISD = 2.1 A, VGS = 0 1.6 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 2 A, di/dt = 100 A/µs VDD = 50V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 2 A, di/dt = 100 A/µs VDD = 50V, Tj = 150°C ISD trr Qrr IRRM trr Qrr IRRM Parameter Test condictions (see Figure 20) (see Figure 20) 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 6/18 Min Typ. 415 1.5 7.2 ns µC A 515 1.9 7.5 ns µC A STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220/ DPAK/ D²PAK Figure 2. Thermal impedance for TO-220/ DPAK/ D²PAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics 7/18 Electrical characteristics STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Figure 7. Transconductance Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature 8/18 Figure 8. Static drain-source on resistance Figure 12. Normalized on resistance vs temperature STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Figure 13. Source-drain diode forward characteristics Electrical characteristics Figure 14. Normalized BVDSS vs temperature Figure 15. Maximum avalanche energy vs temperature 9/18 Test circuit 3 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Test circuit Figure 16. Switching times test circuit for resistive load Figure 17. Gate charge test circuit Figure 18. Test circuit for inductive load Figure 19. Unclamped Inductive load test switching and diode recovery times circuit Figure 20. Test circuit for inductive load switching and diode recovery times 10/18 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/18 Package mechanical data STP2NK90Z - STD2NK90Z - STD2NK90Z-1 TO-220 MECHANICAL DATA DIM. mm. MIN. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 12/18 TYP 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Package mechanical data TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 0.85 B5 0.033 0.3 0.012 B6 0.95 C 0.45 C2 0.48 D 6 E 6.4 6.6 0.037 0.6 0.017 0.023 0.6 0.019 0.023 6.2 0.236 0.244 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 13/18 Package mechanical data STP2NK90Z - STD2NK90Z - STD2NK90Z-1 DPAK MECHANICAL DATA mm. inch DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 TYP 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 MAX. MIN. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 6.6 0.252 5.1 6.4 0.260 0.173 0.368 0.039 2.8 0.8 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.185 0.090 4.6 10.1 0.6 MAX. 0.200 4.7 2.28 4.4 9.35 1 TYP. 0.039 0.008 8° 0° 8° 0068772-F 14/18 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 5 Packing mechanical data Packing mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 * on sales type 15/18 Packing mechanical data STP2NK90Z - STD2NK90Z - STD2NK90Z-1 DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 16/18 inch 1.5 D1 1.5 E 1.65 MIN. MAX. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 0.059 F 7.4 7.6 0.291 0.299 K0 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 R 40 W 15.7 1.574 16.3 0.618 0.641 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 6 Revision history Revision history Table 9. Revision history Date Revision Changes 06-Oct-2004 1 First version 08-Sep-2005 2 Complete version 05-Mar-2006 3 Inserted Ecopack indication 27-Jul-2006 4 New template, no content change 17/18 STP2NK90Z - STD2NK90Z - STD2NK90Z-1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18