STS11NF30L N-channel 30V - 0.0085Ω - 11A SO-8 Low gate charge STripFET™ II Power MOSFET General features Type VDSS RDS(on) ID STS11NF30L 30V <0.009Ω 11A ■ Optimal RDS(on) x Qg trade-off ■ Conduction losses reduced Description S0-8 This Power MOSFET is the latest development of STMicroelectronis unique "Single Feature Size™" strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STS11NF30L 11F30L- SO-8 Tape & reel January 2007 Rev 11 1/12 www.st.com 12 Contents STS11NF30L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 ................................................ 8 STS11NF30L 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit 30 V ± 18 V Drain current (continuous) at TC = 25°C 11 A VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage ID (1) ID Drain current (continuous) at TC = 100°C 7 A IDM(2) Drain current (pulsed) 44 A PTOT Total dissipation at TC = 25°C 2.5 W Derating factor 0.02 W/°C Peak diode recovery voltage slope 5.5 V/ns -55 to 150 150 °C Thermal resistance junction-ambient Max(1) 50 °C/W Maximum lead temperature for soldering purpose 150 °C dv/dt(3) TJ Tstg Operating junction temperature Storage temperature 1. Current limited by the package 2. Pulse width limited by safe operating area 3. ISD ≤11A, di/dt ≤370A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX Table 2. Rthj-a Tl Thermal data 1. When Mounted on 1 inch2 FR-4 board, 2 oz of Cu and t [ 10 sec 3/12 Electrical characteristics 2 STS11NF30L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage Test conditions ID = 250 µA, VGS = 0 Typ. Max. 30 Unit V VDS = Max rating 1 µA VDS=Max rating, TC=125°C 10 µA ±100 nA IDSS Zero gate voltage drain current (VGS = 0) IGSS Gate-body leakage current (VDS = 0) VGS = ± 18V VGS(th) Gate threshold voltage VDS = VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS = 10V, ID = 5.5A VGS = 5V, ID = 5.5A Table 4. Min. 1 V 0.0085 0.0105 0.0145 0.0190 Ω Ω Dynamic Symbol Parameter gfs (1) Forward transconductance Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Qg Total gate charge Qgs Gate-source charge Qgd Gate-drain charge Test conditions Min. VDS = 25V, ID=5.5A VDS = 25V, f = 1 MHz, VGS = 0 Typ. Unit 15 S 1440 pF 560 pF 135 pF 22.5 VDD = 15V, ID = 11A, VGS =5V Max. 30 nC 9 nC 12 nC 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 . Table 5. Symbol 4/12 Switching times Parameter td(on) tr Turn-on delay time Rise time td(off) tf Turn-off-delay time Fall time Test conditions VDD=15 V, ID=5.5A, RG=4.7Ω, VGS= 5V (see Figure 13) VDD = 15V, ID = 5.5A, RG = 4.7Ω, VGS = 5V (see Figure 13) Min. Typ. Max. Unit 22 39 ns ns 23 16 ns ns STS11NF30L Electrical characteristics Table 6. Symbol ISD Source drain diode Parameter Test conditions Min Typ. Max Unit Source-drain current 11 A ISDM (1) Source-drain current (pulsed) 44 A VSD (2) Forward on voltage ISD = 11A, VGS = 0 1.2 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 11A, VDD = 20V di/dt = 100A/µs, Tj = 150°C (see Figure 15) trr Qrr IRRM 42 52 2.5 ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % 5/12 Electrical characteristics STS11NF30L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/12 STS11NF30L Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Figure 11. Source-drain diode forward characteristics Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 12. Normalized Breakdown Voltage vs Temperature 7/12 Test circuit 3 STS11NF30L Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/12 Figure 18. Switching time waveform STS11NF30L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com 9/12 Package mechanical data STS11NF30L SO-8 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. TYP. 1.75 0.1 MAX. 0.068 0.25 a2 0.003 0.009 1.65 0.064 a3 0.65 0.85 0.025 0.033 b 0.35 0.48 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.25 0.5 0.010 0.019 D 4.8 5.0 0.188 0.196 E 5.8 6.2 0.228 c1 45 (typ.) 1.27 e e3 3.81 0.150 3.8 4.0 0.14 L 0.4 1.27 0.015 S 0.244 0.050 F M 10/12 MIN. 0.6 0.157 0.050 0.023 8 (max.) STS11NF30L 5 Revision history Revision history Table 7. Revision history Date Revision Changes 09-Sep-2004 9 Complete version 17-Aug-2006 10 The document has been reformatted 12-Jan-2007 11 Updates in Safe operating area 11/12 STS11NF30L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12