STMICROELECTRONICS STTH1002CFP

STTH1002C
®
HIGH EFFICIENCY ULTRAFAST DIODE
MAIN PRODUCT CHARACTERISTICS
IF(AV)
Up to 2 x 8A
A1
VRRM
200 V
A2
Tj (max)
175 °C
VF (typ)
0.78 V
trr (typ)
20 ns
K
A2
■
■
■
■
■
■
A2
K
FEATURES AND BENEFITS
K
A1
A1
I2PAK
STTH1002CR
TO-220AB
STTH1002CT
Suited for SMPS
Low losses
Low forward and reverse recovery times
Insulated package: TO-220FPAB
High junction temperature
Low leakage current
K
K
A2
K
A1
D2PAK
STTH1002CG
TO-220FPAB
STTH1002CFP
DESCRIPTION
Dual center tap rectifier suited for Switch Mode
Power Supplies and High frequency DC to DC
converters.
Packaged in DPAK, D2PAK, TO-220AB,
TO220-FPAB and I2PAK, this device is intended
for use in low voltage, high frequency inverters,
free wheeling and polarity protection applications.
K
K
A2
A1
DPAK
STTH1002CB
ABSOLUTE RATINGS (limiting values, per diode)
Symbol
Parameter
VRRM
IF(RMS)
IF(AV)
Value
Unit
200
V
TO-220AB / TO-220FPAB / I PAK / D PAK /
20
A
DPAK
10
Repetitive peak reverse voltage
RMS forward current
Average forward
current δ =0.5
2
2
TO-220AB / I PAK
/ D2PAK / DPAK
TO-220FPAB
IFSM
Surge non repetitive forward current
Tstg
Storage temperature range
Tj
Maximum operating junction temperature
March 2004 - Ed: 4
A2
A1
2
Tc = 155°C
Per diode
5
Tc = 150°C
Per device
10
Tc = 135°C
Per diode
8
Tc = 125°C
Per device
16
Tc = 140°C
Per diode
5
Tc = 120°C
Per device
10
Tc = 110°C
Per diode
8
Tc = 75°C
Per device
16
tp = 10 ms Sinusoidal
A
50
A
- 65 + 175
°C
175
°C
1/8
STTH1002C
THERMAL PARAMETERS
Symbol
Parameter
Rth (j-c)
Junction to case
Coupling
Rth (j-c)
2
2
Maximum
Unit
°C/W
TO-220AB / I PAK / D PAK
/ DPAK
Per diode
4.0
Per device
2.5
TO-220FPAB
Per diode
6.5
Per device
5
2
2
TO-220AB / I PAK / D PAK / DPAK
1.0
TO-220FPAB
3.5
°C/W
When the diodes 1 and 2 are used simultaneously:
∆ Tj (diode1) = P(diode1) x Rth(j-c) (per diode) + P(diode2) x Rth(c)
STATIC ELECTRICAL CHARACTERISTICS (per diode)
Symbol
Parameter
IR*
Tests conditions
Reverse leakage
current
VF**
Tj = 25°C
Min.
VR = VRRM
3
Tj = 125°C
Forward voltage drop
Typ.
Max.
Unit
5
µA
40
Tj = 25°C
IF = 5 A
1.1
Tj = 25°C
IF = 10 A
1.25
Tj = 150°C
IF = 5 A
Tj = 150°C
IF = 10 A
0.78
V
0.89
1.05
Pulse test: * tp = 5ms, δ < 2%
** tp = 380µs, δ < 2%
To evaluate the maximum conduction losses use the following equation :
P = 0.73 x IF(AV) + 0.032 IF2(RMS)
DYNAMIC ELECTRICAL CHARACTERISTICS
Symbol
trr
IRM
tfr
VFP
2/8
Parameter
Tests conditions
Min.
Typ.
Max.
Unit
Reverse
recovery time
Tj = 25°C
IF = 1 A VR = 30V
dIF/dt = 100 A/µs
20
25
ns
Reverse
recovery current
Tj = 125°C
IF = 5 A VR = 160V
dIF/dt = 200 A/µs
5.9
7.6
A
Forward
recovery time
Tj = 25°C
IF = 5 A dIF/dt = 100 A/µs
VFR = 1.1 x VFmax
110
ns
Forward
recovery voltage
Tj = 25°C
IF = 5 A dIF/dt = 100 A/µs
2.4
V
STTH1002C
Fig. 1: Peak current versus duty cycle (per diode).
Fig. 2-1: Forward voltage drop versus forward
current (typical values, per diode).
IM(A)
IFM(A)
60
100
90
50
80
70
40
60
30
IM
P = 10W
50
T
Tj=150°C
40
20
P = 5W
δ=tp/T
30
tp
Tj=25°C
20
P = 2W
10
10
0
0.0
0.1
0.2
0.3
0.4
VFM(V)
0
δ
0.00
0.5
0.6
0.7
0.8
0.9
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
1.0
Fig. 2-2: Forward voltage drop versus forward
current (maximum values, per diode).
Fig. 3-1: Relative variation of thermal impedance
junction to case versus pulse duration (TO-220AB,
I2PAK, D2PAK, DPAK).
Zth(j-c)/Rth(j-c)
IFM(A)
1.0
100
90
80
70
60
Tj=150°C
50
Single pulse
40
30
Tj=25°C
20
10
VFM(V)
tp(s)
0
0.1
0.00
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
2.50
2.75
3.00
Fig. 3-2: Relative variation of thermal impedance
junction to case versus pulse duration
(TO-220FPAB).
1.E-03
1.E-02
1.E-01
1.E+00
Fig. 4: Junction capacitance versus reverse
voltage applied (typical values, per diode).
Zth(j-c)/Rth(j-c)
C(pF)
1.0
100
F=1MHz
VOSC=30mVRMS
Tj=25°C
Single pulse
tp(s)
VR(V)
10
0.1
1.E-03
1.E-02
1.E-01
1.E+00
0
50
100
150
200
3/8
STTH1002C
Fig. 5: Reverse recovery charges versus dIF/dt
(typical values, per diode).
Fig. 6: Reverse recovery time versus dIF/dt
(typical values, per diode).
trr(ns)
Qrr(nC)
240
80
IF=5A
VR=160V
220
IF=5A
VR=160V
70
200
180
60
160
Tj=125°C
50
140
120
40
Tj=125°C
100
30
80
60
20
Tj=25°C
40
Tj=25°C
20
10
dIF/dt(A/µs)
dIF/dt(A/µs)
0
10
0
100
1000
Fig. 7: Peak reverse recovery current versus dIF/dt
(typical values, per diode).
10
100
1000
Fig. 8: Dynamic parameters versus junction
temperature.
IRM(A)
Qrr;IRM[Tj]/Qrr;IRM[Tj=125°C]
13
1.4
IF=5A
VR=160V
12
IF=5A
VR=160V
1.2
11
10
1.0
9
8
IRM
0.8
7
Tj=125°C
Qrr
6
0.6
5
4
0.4
3
Tj=25°C
2
0.2
Tj(°C)
dIF/dt(A/µs)
1
0.0
0
10
100
25
1000
Fig. 9-1: Thermal resistance junction to ambient
versus copper surface under tab (Epoxy printed
circuit board FR4, eCU: 35µm) for D2PAK.
50
75
100
125
150
Fig. 9-2: Thermal resistance junction to ambient
versus copper surface under tab (Epoxy printed
circuit board FR4, eCU: 35µm) for DPAK.
Rth(j-a)(°C/W)
Rth(j-a)(°C/W)
100
80
90
70
80
60
70
50
60
50
40
40
30
30
20
20
10
10
S(Cu)(cm²)
0
S(Cu)(cm²)
0
0
4/8
2
4
6
8
10
12
14
16
18
20
0
2
4
6
8
10
12
14
16
18
20
STTH1002C
Ordering code
Marking
Package
Weight
Base qty
Delivery mode
STTH1002CB
STTH1002CB
DPAK
0.3 g
75
Tube
STTH1002CB-TR
STTH1002CB
DPAK
0.3 g
2500
Tape & reel
STTH1002CT
STTH1002CT
TO-220AB
STTH1002CG
STTH1002CG
STTH1002CG-TR
STTH1002CG
2.23 g
50
Tube
2
1.48 g
50
Tube
2
1.48g
1000
Tape & reel
2
D PAK
D PAK
STTH1002CR
STTH1002CR
I PAK
1.49 g
50
Tube
STTH1002CFP
STTH1002CFP
TO-220FPAB
1.70 g
50
Tube
PACKAGE MECHANICAL DATA
DPAK
DIMENSIONS
REF.
Millimeters
Inches
Min.
Max
Min.
Max.
A
2.20
2.40
0.086
0.094
A1
0.90
1.10
0.035
0.043
A2
0.03
0.23
0.001
0.009
B
0.64
0.90
0.025
0.035
B2
5.20
5.40
0.204
0.212
C
0.45
0.60
0.017
0.023
C2
0.48
0.60
0.018
0.023
D
6.00
6.20
0.236
0.244
E
6.40
6.60
0.251
0.259
G
4.40
4.60
0.173
0.181
H
9.35
10.10
0.368
0.397
L2
0.80 typ.
0.031 typ.
L4
0.60
1.00
0.023
0.039
V2
0°
8°
0°
8°
FOOTPRINT
6.7
6.7
3
3
1.6
1.6
2.3
2.3
5/8
STTH1002C
PACKAGE MECHANICAL DATA
D2PAK
DIMENSIONS
REF.
A
E
C2
L2
D
L
L3
A1
B2
R
C
B
G
A2
M
*
V2
* FLAT ZONE NO LESS THAN 2mm
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.70
0.93
0.027
0.037
B2
1.14
1.70
0.045
0.067
C
0.45
0.60
0.017
0.024
C2
1.23
1.36
0.048
0.054
D
8.95
9.35
0.352
0.368
E
10.00
10.40
0.393
0.409
G
4.88
5.28
0.192
0.208
L
15.00
15.85
0.590
0.624
L2
1.27
1.40
0.050
0.055
L3
1.40
1.75
0.055
0.069
M
2.40
3.20
0.094
0.126
V2
16.90
10.30
5.08
1.30
3.70
8.90
6/8
Inches
Min.
R
FOOTPRINT DIMENSIONS (in millimeters)
Millimeters
0.40 typ.
0°
8°
0.016 typ.
0°
8°
STTH1002C
PACKAGE MECHANICAL DATA
I2PAK
DIMENSIONS
REF.
A
E
c2
L2
D
L1
A1
b2
L
b1
b
Millimeters
Inches
Min.
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
A1
2.49
2.69
0.098
0.106
b
0.70
0.93
0.028
0.037
b1
1.14
1.17
0.044
0.046
b2
1.14
1.17
0.044
0.046
c
0.45
0.60
0.018
0.024
c2
1.23
1.36
0.048
0.054
D
8.95
9.35
0.352
0.368
e
2.40
2.70
0.094
0.106
E
10.0
10.4
0.394
0.409
L
13.1
13.6
0.516
0.535
L1
3.48
3.78
0.137
0.149
L2
1.27
1.40
0.050
0.055
c
e
PACKAGE MECHANICAL DATA
TO-220FPAB
REF.
A
B
H
Dia
L6
L2
L7
L3
L5
D
F1
L4
F2
F
G1
G
E
A
B
D
E
F
F1
F2
G
G1
H
L2
L3
L4
L5
L6
L7
Dia.
DIMENSIONS
Millimeters
Inches
Min.
Max.
Min.
Max.
4.4
4.6
0.173
0.181
2.5
2.7
0.098
0.106
2.5
2.75
0.098
0.108
0.45
0.70
0.018
0.027
0.75
1
0.030
0.039
1.15
1.70
0.045
0.067
1.15
1.70
0.045
0.067
4.95
5.20
0.195
0.205
2.4
2.7
0.094
0.106
10
10.4
0.393
0.409
16 Typ.
0.63 Typ.
28.6
30.6
1.126
1.205
9.8
10.6
0.386
0.417
2.9
3.6
0.114
0.142
15.9
16.4
0.626
0.646
9.00
9.30
0.354
0.366
3.00
3.20
0.118
0.126
7/8
STTH1002C
PACKAGE MECHANICAL DATA
TO-220AB
DIMENSIONS
REF.
Dia
Max.
Min.
Max.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.066
F2
1.14
1.70
0.044
0.066
G
4.95
5.15
0.194
0.202
G1
2.40
2.70
0.094
0.106
H2
10
10.40
0.393
0.409
C
L5
L7
L6
L2
F2
F1
D
L9
L4
L2
F
M
G1
E
G
■
■
■
■
0.645 typ.
13
14
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.20
6.60
0.244
0.259
L9
3.50
3.93
0.137
0.154
Diam.
■
16.4 typ.
L4
M
■
Inches
Min.
A
H2
Millimeters
2.6 typ.
3.75
3.85
0.102 typ.
0.147
0.151
Epoxy meets UL94,V0
Cooling method: by conduction (method C)
Recommended torque value (TO-220AB): 0.8 N.m.
Maximum torque value (TO-220AB): 1.0 N.m.
Recommended torque value (TO-220FPAB): 0.55 N.m.
Maximum torque value (TO-220FPAB): 0.7 N.m.
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of
use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to
change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners.
© 2004 STMicroelectronics - All rights reserved.
STMicroelectronics GROUP OF COMPANIES
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain Sweden - Switzerland - United Kingdom - United States
www.st.com
8/8