STTH8R06D/FP/G/R ® TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER MAIN PRODUCT CHARACTERISTICS K IF(AV) 8A VRRM 600 V IRM (typ.) 5.5A Tj (max) 175 °C VF (max) 1.8 V trr (max) 45 ns A A K K TO-220FPAC STTH8R06FP TO-220AC STTH8R06D FEATURES AND BENEFITS ■ ■ ■ ■ Ultrafast switching Low reverse recovery current Reduces switching losses Low thermal resistance K K A A NC DESCRIPTION The STTH8R06D/FP/G/R, which is using ST 600V technology, is specially suited as boost diode in continuous mode power factor corrections and hard switching conditions. The device is also intended for use as a free wheeling diode in power supplies and other power switching applications. D2PAK STTH8R06G K NC I2PAK STTH8R06R ABSOLUTE RATINGS (limiting values) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) RMS forward current 30 A TO-220AC Tc = 130°C D2PAK / I2PAK Tc = 130°C TO-220FPAC Tc = 85°C 8 A tp = 10 ms 80 A - 65 + 175 °C + 175 °C δ = 0.5 IF(AV) Average forward current IFSM Surge non repetitive forward current Tstg Storage temperature range Tj Maximum operating junction temperature January 2002 - Ed: 2C Sinusoidal 1/7 STTH8R06D/FP/G/R THERMAL RESISTANCES Symbol Rth (j-c) Parameter 2 Junction to case 2 TO-220AC / D PAK / I PAK TO-220FPAC Value Unit 2.2 4.6 °C/W STATIC ELECTRICAL CHARACTERISTICS Symbol IR VF Parameter Tests conditions Reverse leakage current VR = 600V Forward voltage drop IF = 8 A Min. Typ. Tj = 25°C Tj = 125°C 35 Tj = 25°C Max. Unit 30 µA 400 2.9 Tj = 125°C V 1.4 1.8 Typ. Max. Unit 25 ns To evaluate the maximum conduction losses use the following equation : P = 1.16 x IF(AV) + 0.08 IF2(RMS) DYNAMIC ELECTRICAL CHARACTERISTICS Symbol trr Tests conditions IF = 0.5 A Irr = 0.25 A IR = 1A Min. Tj = 25°C IF = 1 A dIF/dt = - 50 A/µs VR = 30V IRM VR = 400 V IF = 8A dIF/dt = - 200A/µs 45 Tj = 125°C 5.5 S factor 0.3 Qrr 150 tfr VFP 2/7 IF = 8 A dIF/dt = 64 A/µs VFR = 1.1 x VFmax Tj = 25°C 7.2 A nC 150 ns 5 V STTH8R06D/FP/G/R Fig. 1: Conduction losses versus average current. PF(av)(W) Fig. 2: Forward voltage drop versus forward current. 10 IFM(A) 100 90 Tj=125°C Maximum values 80 70 Tj=125°C 60 Typical values 50 40 Tj=25°C Maximum values 30 20 10 VFM(V) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Fig. 3-1: Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC, I2PAK, D2PAK). Fig. 3-2: Relative variation of thermal impedance junction to case versus pulse duration (TO-220FPAC). 22 20 18 16 14 12 10 8 6 4 2 0 δ = 0.05 δ = 0.1 δ = 0.2 δ = 0.5 δ=1 T IF(av) (A) 0 1 2 3 4 5 δ=tp/T 6 7 8 tp 9 Zth(j-c)/Rth(j-c) Zth(j-c)/Rth(j-c) 1.0 1.0 0.8 0.6 0.4 0.8 δ = 0.5 0.6 δ = 0.2 0.4 δ = 0.1 0.2 δ = 0.2 T tp(s) δ=tp/T 1E-2 1E-1 tp tp(s) Single pulse 1E+0 Fig. 4: Peak reverse recovery current versus dIF/dt (90% confidence). 0.0 1E-3 1E-2 δ=tp/T 1E-1 120 1E+1 trr(ns) VR=400V Tj=125°C 110 IF=2 x IF(av) tp 1E+0 Fig. 5: Reverse recovery time versus dIF/dt (90% confidence). IRM(A) 22 VR=400V Tj=125°C T δ = 0.1 0.2 Single pulse 0.0 1E-3 20 δ = 0.5 100 18 90 IF=0.5 x IF(av) 16 80 IF=IF(av) 14 70 12 60 10 IF=0.25 x IF(av) IF=IF(av) 50 IF=0.5 x IF(av) 8 40 6 IF=2 x IF(av) 30 4 20 2 10 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 0 200 400 600 800 1000 0 200 400 600 800 1000 3/7 STTH8R06D/FP/G/R Fig. 6: Reverse recovery charges versus dIF/dt (90% confidence). Fig. 7: Softness factor (tb/ta) versus dIF/dt (typical values). S factor Qrr(nC) 350 0.70 VR=400V Tj=125°C IF< 2 x IF(av) VR=400V Tj=125°C 0.65 IF=2 x IF(av) 300 0.60 250 0.55 IF=IF(av) 0.50 200 0.45 IF=0.5 x IF(av) 0.40 150 0.35 0.30 100 0.25 0.20 50 dIF/dt(A/µs) 0.15 0 0 200 400 600 800 1000 Fig. 8: Relative variation of dynamic parameters versus junction temperature (Reference: Tj=125°C). 0 400 600 800 1000 VFP(V) 2.0 S factor 1.5 1.0 IRM 0.5 QRR Tj(°C) 0.0 25 50 75 100 125 Fig. 10: Forward recovery time versus dIF/dt (90% confidence). 12 11 10 9 8 7 6 5 4 3 2 1 0 IF=IF(av) Tj=125°C dIF/dt(A/µs) 0 50 100 150 200 250 300 350 400 450 500 Fig. 11: Junction capacitance versus reverse voltage applied (typical values). tfr(ns) 200 180 160 140 120 100 80 60 40 20 0 200 Fig. 9: Transient peak forward voltage versus dIF/dt (90% confidence). 2.5 4/7 dIF/dt(A/µs) 0.10 C(pF) VFR=1.1 x VF max. IF=IF(av) Tj=125°C 100 F=1MHz Vosc=30mV Tj=25°C 50 20 dIF/dt(A/µs) 0 50 100 150 200 250 300 350 400 450 500 VR(V) 10 1 10 100 200 STTH8R06D/FP/G/R PACKAGE MECHANICAL DATA TO-220FPAC DIMENSIONS REF. Millimeters Inches A B D E F F1 G G1 H L2 L3 L4 L5 L6 L7 Dia. Min. Max. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20 Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126 REF. Millimeters A H B Dia L6 L2 L7 L3 L5 D F1 L4 F E G1 G PACKAGE MECHANICAL DATA TO-220AC DIMENSIONS A H2 C L5 L7 ØI L6 L2 D L9 F1 M F E G Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 L4 Inches 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/7 STTH8R06D/FP/G/R PACKAGE MECHANICAL DATA D2PAK DIMENSIONS REF. E C2 D L L3 A1 B2 R C B G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.40 3.20 0.094 0.126 R V2 FOOTPRINT (in millimeters) 16.90 10.30 5.08 1.30 3.70 8.90 6/7 Inches Max. A L2 Millimeters Min. 0.40 typ. 0° 8° 0.016 typ. 0° 8° STTH8R06D/FP/G/R PACKAGE MECHANICAL DATA I2PAK DIMENSIONS REF. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 b 0.70 0.93 0.028 0.037 b1 1.14 1.17 0.044 0.046 b2 1.14 1.17 0.044 0.046 c 0.45 0.60 0.018 0.024 c2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 b2 e 2.40 2.70 0.094 0.106 b1 E 10.0 10.4 0.394 0.409 L 13.1 13.6 0.516 0.535 L1 3.48 3.78 0.137 0.149 L2 1.27 1.40 0.050 0.055 E c2 L2 D L1 A1 L b c e Ordering code Marking Package Weight Base qty Delivery mode STTH8R06D STTH8R06D TO-220AC 1.9 g 50 Tube STTH8R06FP STTH8R06FP TO-220FPAC STTH8R06G STTH8R06R ■ ■ ■ Inches Min. A ■ Millimeters STTH8R06G STTH8R06R 1.7 g 50 Tube 2 1.5 g 50 Tube 2 1.5 g 50 Tube D PAK I PAK Cooling method: by conduction (C) Recommended torque value (TO-220AC): 0.55 Nm Maximum torque value (TO-220AC / TO-220FPAC): 0.7 Nm Epoxy meets UL 94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7