DC/DC Converter TEN 15 Series 15 Watt Features pending Wide 2 : 1 Input Range Highest Power Density Operating Temp. Range – 25°C to +71°C Indefinite Short-Circuit Protection I/O-Isolation 1500 VDC Input Filter meets EN 55022, Class A and FCC, Level A without external Components Industry Standard Pinout Shielded Metal Case with insulated Baseplate 2 Year Product Warranty The TEN 15 series of DC/DC converters , comprising 21 different models, has been designed for a wide range of applications including communications, industrial systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and a high efficiency. Models Ordercode TEN 15-1210 TEN 15-1211 TEN 15-1212 TEN 15-1213 TEN 15-1221 TEN 15-1222 TEN 15-1223 TEN 15-2410 TEN 15-2411 TEN 15-2412 TEN 15-2413 TEN 15-2421 TEN 15-2422 TEN 15-2423 TEN 15-4810 TEN 15-4811 TEN 15-4812 TEN 15-4813 TEN 15-4821 TEN 15-4822 TEN 15-4823 www.tracopower.com Input voltage range Output voltage Output current max. Efficiency typ. 9 – 18 VDC 3,3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 4’000 3‘000 1’250 1’000 ± 1‘500 ± 625 ± 500 mA mA mA mA mA mA mA 79 82 83 83 82 85 85 % % % % % % % 18 – 36 VDC 3,3VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 4’000 3‘000 1’250 1’000 ± 1‘500 ± 625 ± 500 mA mA mA mA mA mA mA 80 83 84 84 83 86 86 % % % % % % % 36 – 75 VDC 3,3VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 4’000 3‘000 1’250 1’000 ± 1‘500 ± 625 ± 500 mA mA mA mA mA mA mA 80 83 84 84 83 86 86 % % % % % % % Page 1 DC/DC Converter TEN 15 Series 15 Watt Input Specifications Input current no load /full load Input current (full load) 12 Vin models: 24 Vin models: 48 Vin models: 12 Vin; 12 Vin; 24 Vin; 24 Vin; 48 Vin; 48 Vin; Surge voltage (100 msec. max.) 3.3 Vout models: other output models: 3.3 Vout models: other output models: 3.3 Vout models: other output models: 12 Vin models: 24 Vin models: 48 Vin models: Conducted noise (input) 40 mA typ. 25 mA typ. 20 mA typ. 1580 mA typ. 1500 mA typ. 780 mA typ. 740 mA typ. 390 mA typ. 370 mA typ. 36 V max. 50 V max.. 100 V max. EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1% Regulation ± 1 % max. – Input variation Vin min. to Vin max. – Load variation 10 – 100 % – single output models – dual output models balanced load – dual output models unbalanced load Ripple and noise (20 MHz Bandwidth) single output models: dual output models: ± 0.5 % max. ± 1 % max. ± 3 % max. 50 mVpk-pk max. 75 mVpk-pk max Temperature coefficient ± 0.02 % / °C Output current limitation > 110% of Iout max., foldback Short circuit protection indefinite (automatic recovery)?? Capacitive load 3.3 Vout models: 5 Vout models / ± 5 Vout models: 12 Vout models / ±12 Vout models: 15 Vout models / ±15 Vout models: 10’200 µF max. 7’050 µF max. / ± 1’020 µF max. 1’035 µF max. / ± 495 µF max. 750 µF max. / ± 165 µF max. General Specifications Temperature ranges – 25 °C ... + 71 °C + 100 °C max. – 55 °C ... + 125 °C – Operating – Case temperature – Storage Derating 3.3 VDC output models: other output models: 2.5%/°C above 60°C no derating Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217 E) > 560’000 h @ + 25 °C Isolation voltage – Input/Output 1‘500 VDC Isolation capacity – Input/Output 680 pF typ Isolation resistance – Input/Output (500 VDC) > 1’000 MOhm Switching frequency (fixed) single output models: dual output models: 500 kHz typ. (Pulse width modulation PWM) 300 kHz typ. (Pulse width modulation PWM) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 DC/DC Converter TEN 15 Series 15 Watt General Specifications Safety standards UL 1950, EN 60950, IEC 60950 (Compliance up to 60 VDC input voltage(SELV limit) Savety approvals UL /cUL pending Physical Specifications Case material Copper nickel plated Baseplate Non conductive plastic Potting material Epoxy (flammability to UL 94V-0) Weight 31g (1.09oz) Soldering temperature max. 250 °C / 10 sec. Outline Dimensions mm (inches) 50.8 ±0.5 (1.0 ±0.02) 25.4 ±0.5 6.2 10.2 ±0.5 Pin-Out Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 +Vout +Vout 4 No pin Common 5 –Vout –Vout (0.24) (0.402 ±0.02) 2.5 ±0.5 ±0.02) (0.4 10.2 ±0.5 5 (0.8) 4 20.32 1 2 (0.4) 3 Bottom View (0.4) (0.8) (0.098 ±0.02) 20.32 (0.6 ±0.02) 10.16 10.16 15.2 ±0.5 (0.2) 5.08 (2.0 ±0.02) Insulated baseplate Pin diameter ø 1.0 ±0.05 (0.039 ±0.002) Specifications can be changed without notice Rev. 11/01 Jenatschstrasse 1 • CH-8002 Zurich • Switzerland Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: [email protected] • internet: http://www.tracopower.com Page 3