TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 1-Ω DUAL SPDT ANALOG SWITCH 5-V/3.3-V 2-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER FEATURES APPLICATIONS • • • • • • • • • • • • • • • • • • • 1 Isolation in Power-Down Mode, V+ = 0 Specified Break-Before-Make Switching Low ON-State Resistance (1 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.5-V Single-Supply Operation Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C101) • Cell Phones PDAs Portable Instrumentation Audio and Video Signal Routing Low-Voltage Data-Acquisition Systems Communication Circuits Modems Hard Drives Computer Peripherals Wireless Terminals and Peripherals DGS PACKAGE (TOP VIEW) RSE PACKAGE (TOP VIEW) COM1 IN1 1 10 9 NC1 NO1 2 8 V+ GND 3 7 NC2 NO2 4 5 6 COM2 IN1 1 10 NO1 2 9 NC1 GND 3 8 V+ NO2 4 7 NC2 IN2 5 6 COM2 COM1 IN2 DESCRIPTION/ORDERING INFORMATION The TS5A23159 is a dual single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to 5.5 V. The device offers low ON-state resistance and excellent ON-state resistance matching with the break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to another. The device has an excellent total harmonic distortion (THD) performance and consumes very low power. These features make this device suitable for portable audio applications. ORDERING INFORMATION (1) PACKAGE (2) TA –40°C to 85°C (1) (2) ORDERABLE PART NUMBER TOP-SIDE MARKING VSSOP – DGS (MSOP) Tape and reel TS5A23159DGSR JER or JEO QFN – RSE Tape and reel TS5A23159RSER JEO For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site at www.ti.com. Package drawings, thermal data, and symbolization are available at www.ti.com/packaging. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2005–2009, Texas Instruments Incorporated TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com SUMMARY OF CHARACTERISTICS (1) Dual 2:1 Multiplexer/Demultiplexer (2 × SPDT) Configuration Number of channels 2 1.1 Ω ON-state resistance (ron) ON-state resistance match (Δron) 0.1 Ω ON-state resistance flatness (ron(flat)) 0.15 Ω Turn-on/turn-off time (tON/tOFF) 20 ns/15 ns Break-before-make time (tBBM) 12 ns Charge injection (QC) –7 pC Bandwidth (BW) 100 MHz OFF isolation (OISO) –65 dB at 1 MHz Crosstalk (XTALK) –66 dB at 1 MHz Total harmonic distortion (THD) 0.01% Leakage current (INO(OFF)/INC(OFF)) ±20 nA Power-supply current (I+) 50 nA Package options (1) 10-pin VSSOP and QFN V+ = 5 V, TA = 25°C FUNCTION TABLE NC TO COM, COM TO NC NO TO COM, COM TO NO L ON OFF H OFF ON IN 2 Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 Absolute Minimum and Maximum Ratings (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX V+ Supply voltage range (3) –0.5 6.5 V VNC VNO VCOM Analog voltage range (3) (4) (5) –0.5 V+ + 0.5 V IK Analog port diode current INC INO ICOM On-state switch current VI Digital input voltage range (3) (4) IIK Digital input clamp current I+ Continuous current through V+ IGND Continuous current through GND θJA Package thermal impedance (7) Tstg Storage temperature range (1) (2) (3) (4) (5) (6) (7) On-state peak switch current (6) VNC, VNO, VCOM < 0 VNC, VNO, VCOM = 0 to V+ VI < 0 –50 mA –200 200 –400 400 –0.5 6.5 –50 –100 mA V mA 100 mA 100 mA DGS package 165 RSE package TBD –65 UNIT 150 °C/W °C Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All voltages are with respect to ground, unless otherwise specified. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. This value is limited to 5.5 V maximum. Pulse at 1-ms duration < 10% duty cycle The package thermal impedance is calculated in accordance with JESD 51-7. Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 3 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range VCOM, VNO, VNC Peak ON resistance rpeak ON-state resistance ron ON-state resistance match between channels ON-state resistance flatness NC, NO OFF leakage current 0 ≤ (VNO or VNC) ≤ V+, ICOM = –100 mA, Switch ON, See Figure 14 25°C VNO or VNC = 2.5 V, ICOM = –100 mA, Switch ON, See Figure 14 25°C Full Full Δron ron(flat) INO(OFF), INC(OFF) NC, NO ON leakage current INO(ON), INC(ON) COM OFF leakage current ICOM(PWROFF) ICOM(ON) VNO or VNC = 2.5 V, ICOM = –100 mA, Switch ON, See Figure 14 0 ≤ (VNO or VNC) ≤ V+, ICOM = –100 mA, Switch ON, See Figure 14 VNO or VNC = 1 V, 1.5 V, 2.5 V, ICOM = –100 mA, Switch ON, See Figure 14 VNC or VNO = 1 V, VCOM = 1 V to 4.5 V, or VNC or VNO = 4.5 V, VCOM = 1 V to 4.5 V, Switch OFF, See Figure 15 VNC or VNO = 0 to 5.5 V, VCOM = 5.5 V to 0, Switch OFF, See Figure 15 VNC or VNO = 1 V, VCOM = Open, or VNC or VNO = 4.5 V, VCOM = Open, Switch ON, See Figure 16 VNC or VNO = 0 to 5.5 V, VCOM = 5.5 V to 0, Switch OFF, See Figure 15 VNC or VNO = Open, VCOM = 1 V, or VNC or VNO = Open, VCOM = 4.5 V, Switch ON, See Figure 16 Full 0.7 4.5 V 0.05 4.5 V Full 0.1 –20 5.5 V 0V 5.5 V 0.25 Ω Ω –1 5.5 V 0.2 1 20 2 –100 0.1 1 20 2 nA µA 20 100 –20 –20 20 100 –20 –1 0V 2 –100 –20 25°C Full Ω 0.25 25°C Full Ω 0.15 25°C Full V 0.1 0.1 4.5 V 25°C 25°C 0.9 1.1 Full Full 1.1 1.5 25°C 25°C V+ 0.8 4.5 V 25°C INC(PWROFF), INO(PWROFF) COM ON leakage current 0 nA µA 20 nA –100 100 2.4 5.5 V Full 0 0.8 V 25°C –2 2 –100 100 Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Input logic low VIL Input leakage current (1) (2) 4 IIH, IIL Full VI = 5.5 V or 0 Full 5.5 V nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 Electrical Characteristics for 5-V Supply (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 25°C 5V 1 8 13 Full 4.5 V to 5.5 V 1 25°C 5V 1 Full 4.5 V to 5.5 V 1 25°C 5V 1 Full 4.5 V to 5.5 V 1 UNIT Dynamic Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Turn-off time tOFF VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Break-beforemake time tBBM VNC = VNO = V+, RL = 50 Ω, CL = 35 pF, See Figure 19 Charge injection QC VGEN = 0, RGEN = 0, CL = 1 nF, See Figure 23 25°C 5V –7 pC 16.5 5 8 8 5.5 ns ns 13 14 ns NC, NO OFF capacitance CNC(OFF), CNO(OFF) VNC or VNO = V+ or GND, Switch OFF, See Figure 17 25°C 5V 18 pF NC, NO ON capacitance CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch ON, See Figure 17 25°C 5V 55 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 17 25°C 5V 54.5 pF Digital input capacitance CI VI = V+ or GND, See Figure 17 25°C 5V 2 pF Bandwidth BW RL = 50 Ω, Switch ON, See Figure 20 25°C 5V 100 MHz OFF isolation OISO RL = 50 Ω, f = 1 MHz, Switch OFF, See Figure 21 25°C 5V –64 dB Crosstalk XTALK RL = 50 Ω, f = 1 MHz, Switch ON, See Figure 22 25°C 5V –64 dB Total harmonic distortion THD RL = 600 Ω, CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 24 25°C 5V 0.004 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current 25°C I+ Full 10 5.5 V 50 750 Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 nA 5 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO, VNC Peak ON resistance rpeak ON-state resistance ron ON-state resistance match between channels ON-state resistance flatness NC, NO OFF leakage current Switch ON, See Figure 14 25°C VNO or VNC = 2 V, ICOM = –100 mA, Switch ON, See Figure 14 25°C Full Full 1.3 3V Δron ron(flat) INO(OFF), INC(OFF) NC, NO ON leakage current INO(ON), INC(ON) COM OFF leakage current ICOM(PWROFF) ICOM(ON) VNO or VNC = 2 V, 0.8 V, ICOM = –100 mA, Switch ON, See Figure 14 0 ≤ (VNO or VNC) ≤ V+, ICOM = –100 mA, Switch ON, See Figure 14 VNO or VNC = 2 V, 0.8 V, ICOM = –100 mA, Switch ON, See Figure 14 VNC or VNO = 1 V, VCOM = 1 V to 3 V, or VNC or VNO = 3 V, VCOM = 1 V to 3 V, Switch OFF, See Figure 15 VNC or VNO = 0 to 3.6 V, VCOM = 3.6 V to 0, Switch OFF, See Figure 15 VNC or VNO = 1 V, VCOM = Open, or VNC or VNO = 3 V, VCOM = Open, Switch ON, See Figure 16 VNC or VNO = 3.6 V to 0, VCOM = 0 to 3.6 V, Switch OFF, See Figure 15 VNC or VNO = Open, VCOM = 1 V, or VNC or VNO = Open, VCOM = 3 V, Switch ON, See Figure 16 Full 1.2 3V 1.5 1.7 0.1 3V Ω Ω 0.15 Ω 0.2 25°C 25°C 1.6 2 25°C INC(PWROFF), INO(PWROFF) COM ON leakage current 0 ≤ (VNO or VNC) ≤ V+, ICOM = –100 mA, V 0.15 Ω 3V Full 25°C Full 25°C Full –20 3.6 V 0V 25°C Full 25°C Full –1 3.6 V 0.2 1 15 2 –20 0.2 1 15 2 nA µA 10 20 –15 –10 20 50 –15 –1 0V 25°C Full –50 –10 3.6 V 2 nA µA 10 nA –20 20 2 5.5 V Full 0 0.8 V 25°C –2 2 –20 20 Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Input logic low VIL Input leakage current (1) (2) 6 IIH, IIL Full VI = 5.5 V or 0 Full 3.6 V nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 Electrical Characteristics for 3.3-V Supply (continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 3.3 V 5 Full 3 V to 3.6 V 3 25°C 3.3 V 1 Full 3 V to 3.6 V 1 25°C 3.3 V 1 Full 3 V to 3.6 V 1 TYP MAX UNIT Dynamic 11 19 Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Turn-off time tOFF VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Break-beforemake time tBBM VNC = VNO = V+, RL = 50 Ω, CL = 35 pF, See Figure 19 Charge injection QC VGEN = 0, RGEN = 0, CL = 1 nF, See Figure 23 25°C 3.3 V –4 pC 22 5 9 9 7 ns ns 17 20 ns NC, NO OFF capacitance CNC(OFF), CNO(OFF) VNC or VNO = V+ or GND, Switch OFF, See Figure 17 25°C 3.3 V 18 pF NC, NO ON capacitance CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch ON, See Figure 17 25°C 3.3 V 56 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 17 25°C 3.3 V 56 pF Digital input capacitance CI VI = V+ or GND, See Figure 17 25°C 3.3 V 2 pF Bandwidth BW RL = 50 Ω, Switch ON, See Figure 20 25°C 3.3 V 100 MHz OFF isolation OISO RL = 50 Ω, f = 1 MHz, Switch OFF, See Figure 21 25°C 3.3 V –64 dB Crosstalk XTALK RL = 50 Ω, f = 1 MHz, Switch ON, See Figure 22 25°C 3.3 V –64 dB Total harmonic distortion THD RL = 600 Ω, CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 24 25°C 3.3 V 0.01 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current I+ 25°C Full 3.6 V 25 150 Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 nA 7 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO, VNC Peak ON resistance rpeak ON-state resistance ron ON-state resistance match between channels ON-state resistance flatness NC, NO OFF leakage current Switch ON, See Figure 14 25°C VNO or VNC = 1.8 V, ICOM = –8 mA, Switch ON, See Figure 14 25°C Full Full 1.8 2.3 V Δron VNO or VNC = 1.8 V, 0.8 V, Switch ON, ICOM = –8 mA, See Figure 14 0 ≤ (VNO or VNC) ≤ V+, ICOM = –8 mA, ron(flat) INO(OFF), INC(OFF) NC, NO ON leakage current INO(ON), INC(ON) COM OFF leakage current ICOM(PWROFF) ICOM(ON) Switch ON, See Figure 14 Full 1.5 2.3 V 25°C VNC or VNO = 0.5 V, VCOM = 0.5 V to 2.3 V, or VNC or VNO = 2.2 V, VCOM = 0.5 V to 2.3 V, 25°C Switch OFF, See Figure 15 0.15 2.3 V VNC or VNO = 0 to 2.7 V, VCOM = 2.7 V to 0, Switch OFF, See Figure 15 VNC or VNO = 0.5 V, VCOM = Open, or VNC or VNO = 2.2 V, VCOM = Open, Switch ON, See Figure 16 VNC or VNO = 2.7 V to 0, VCOM = 0 to 2.7 V, Switch OFF, See Figure 15 VNC or VNO = Open, VCOM = 0.5 V, or VNC or VNO = Open, VCOM = 2.2 V, Switch ON, See Figure 16 25°C Full 0.6 –20 2.3 V 0V 2.7 V 1 Ω –1 2.7 V 0.1 1.0 10 2 –20 0.1 1 10 2 nA µA 10 20 –10 –10 20 50 –10 –1 0V 2 –50 –10 25°C Full Ω 1 25°C Full Ω 0.6 2.3 V 25°C Full Ω 0.2 0.2 Full Full 2 2.4 25°C VNO or VNC = 0.8 V, 1.8 V, Switch ON, ICOM = –8 mA, See Figure 14 2.5 2.7 25°C INC(PWROFF), INO(PWROFF) COM ON leakage current 0 ≤ (VNO or VNC) ≤ V+, ICOM = –8 mA, V nA µA 10 nA –20 20 1.8 5.5 V Full 0 0.6 V 25°C –2 2 –20 20 Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Input logic low VIL Input leakage current (1) (2) 8 IIH, IIL Full VI = 5.5 V or 0 Full 2.7 V nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 Electrical Characteristics for 2.5-V Supply (1) (Continued) V+ = 2.3 V to 2.7 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 2.5 V 5 Full 2.3 V to 2.7 V 5 25°C 2.5 V 2 Full 2.3 V to 2.7 V 2 25°C 2.5 V 1 Full 2.3 V to 2.7 V 1 TYP MAX UNIT Dynamic 15 28 Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Turn-off time tOFF VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Break-beforemake time tBBM VNC = VNO = V+, RL = 50 Ω, CL = 35 pF, See Figure 19 Charge injection QC VGEN = 0, RGEN = 0, CL = 1 nF, See Figure 23 25°C 2.5 V –3 pC 32 6 9 10 10 ns ns 27 30 ns NC, NO OFF capacitance CNC(OFF), CNO(OFF) VNC or VNO = V+ or GND, Switch OFF, See Figure 17 25°C 2.5 V 18.5 pF NC, NO ON capacitance CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch ON, See Figure 17 25°C 2.5 V 56.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 17 25°C 2.5 V 56.5 pF Digital input capacitance CI VI = V+ or GND, See Figure 17 25°C 2.5 V 2 pF Bandwidth BW RL = 50 Ω, Switch ON, See Figure 20 25°C 2.5 V 100 MHz OFF isolation OISO RL = 50 Ω, f = 1 MHz, Switch OFF, See Figure 21 25°C 2.5 V –64 dB Crosstalk XTALK RL = 50 Ω, f = 1 MHz, Switch ON, See Figure 22 25°C 2.5 V –64 dB Total harmonic distortion THD RL = 600 Ω, CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 24 25°C 2.5 V 0.02 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current (1) I+ 25°C Full 2.7 V 10 25 100 nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 9 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX 0 V+ UNIT Analog Switch Analog signal range VCOM, VNO, VNC Peak ON resistance rpeak ON-state resistance ron ON-state resistance match between channels ON-state resistance flatness 0 ≤ (VNO or VNC) ≤ V+, ICOM = –2 mA, Switch ON, See Figure 14 25°C VNO or VNC = 1.5 V, ICOM = –2 mA, Switch ON, See Figure 14 25°C Full Full Δron VNO or VNC = 0.6 V, 1.5 V, Switch ON, ICOM = –2 mA, See Figure 14 0 ≤ (VNO or VNC) ≤ V+, ICOM = –2 mA, ron(flat) Switch ON, See Figure 14 Full 2 1.65 V VNC or VNO = 0.3 V, VCOM = 0.3 V to 1.65 V, or VNC or VNO = 1.65 V, VCOM = 0.3 V to 1.65 V 25°C Switch OFF, See Figure 15 INC(PWROFF), INO(PWROFF) VNC or VNO = 0 to 1.95 V, VCOM = 1.95 V to 0, Switch OFF, See Figure 15 NC, NO ON leakage current INO(ON), INC(ON) VNC or VNO = 0.3 V, VCOM = Open, or VNC or VNO = 1.65 V, VCOM = Open, Switch ON, See Figure 16 COM OFF leakage current ICOM(PWROFF) VNC or VNO = 1.95 V to 0, VCOM = 0 to 1.95 V, Switch OFF, See Figure 15 VNC or VNO = Open, VCOM = 0.3 V, or VNC or VNO = Open, VCOM = 1.65 V, Switch ON, See Figure 16 INO(OFF), INC(OFF) ICOM(ON) 2.5 3.5 0.15 1.65 V Ω Ω 0.4 0.4 25°C 25°C COM ON leakage current 15 25°C VNO or VNC = 0.6 V, 1.5 V, Switch ON, ICOM = –2 mA, See Figure 14 NC, NO OFF leakage current 5 1.65 V V Ω 5 1.65 V Ω 4.5 Full Full –20 1.65 V 25°C Full 25°C Full 1.95 V 25°C Full 1 5 2 0.1 1 5 2 nA µA 5 20 –5 –10 1.95 V 0.1 –20 –1 0V 20 50 –5 –5 25°C Full –50 –1 0V 2 nA µA 10 nA –20 20 1.5 5.5 V Full 0 0.6 V 25°C –2 2 –20 20 Digital Control Inputs (IN1, IN2) (2) Input logic high VIH Input logic low VIL Input leakage current (1) (2) 10 IIH, IIL Full VI = 5.5 V or 0 Full 1.95 V nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum All unused digital inputs of the device must be held at V+ or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 Electrical Characteristics for 1.8-V Supply (1) (Continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 1.8 V 10 Full 1.65 V to 1.95 V 10 25°C 1.8 V 2 Full 1.65 V to 1.95 V 2 25°C 1.8 V 1 Full 1.65 V to 1.95 V 1 TYP MAX UNIT Dynamic 27.5 48.5 Turn-on time tON VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Turn-off time tOFF VCOM = V+, RL = 50 Ω, CL = 35 pF, See Figure 18 Break-beforemake time tBBM VNC = VNO = V+, RL = 50 Ω, CL = 35 pF, See Figure 19 Charge injection QC VGEN = 0, RGEN = 0, CL = 1 nF, See Figure 23 25°C 1.8 V 2 pC 55 6.5 11 12 18 ns ns 50 55 ns NC, NO OFF capacitance CNC(OFF), CNO(OFF) VNC or VNO = V+ or GND, Switch OFF, See Figure 17 25°C 1.8 V 18.5 pF NC, NO ON capacitance CNC(ON), CNO(ON) VNC or VNO = V+ or GND, Switch ON, See Figure 17 25°C 1.8 V 56.5 pF COM ON capacitance CCOM(ON) VCOM = V+ or GND, Switch ON, See Figure 17 25°C 1.8 V 56.5 pF Digital input capacitance CI VI = V+ or GND, See Figure 17 25°C 1.8 V 2 pF Bandwidth BW RL = 50 Ω, Switch ON, See Figure 20 25°C 1.8 V 105 MHz OFF isolation OISO RL = 50 Ω, f = 1 MHz, Switch OFF, See Figure 21 25°C 1.8 V –64 dB Crosstalk XTALK RL = 50 Ω, f = 1 MHz, Switch ON, See Figure 22 25°C 1.8 V –64 dB Total harmonic distortion THD RL = 600 Ω, CL = 50 pF, f = 20 Hz to 20 kHz, See Figure 24 25°C 1.8 V 0.06 % VI = V+ or GND, Switch ON or OFF Supply Positive supply current (1) I+ 25°C Full 1.95 V 10 25 50 nA The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 11 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com TYPICAL PERFORMANCE 3.5 1.3 2.5 1.1 V+ = 1.8 V 2 ron (Ω) ron (Ω) 3 V+ = 2.5 V 1.5 TA = 85°C TA = 25°C TA = −40°C 1.5 TA = 255C 0.9 0.7 0.5 V+ = 3 V 1 0.3 0.5 0.1 V+ = 4.5 V 0 1 2 VCOM (V) 0 0 1 2 3 VCOM (V) Figure 1. ron vs VCOM 4 3 4 Figure 2. ron vs VCOM (V+ = 3.3 V) 1.0 20 COM (on) 0.9 0.8 Leakage (nA) ron (Ω) 0.7 0.6 0.5 0.4 TA = 85°C TA = 25°C TA = −40°C 0.3 0.2 1 2 3 4 5 NO/NC (on) −20 NO/NC (off) 0.1 0 0 −40 −60 6 VCOM (V) COM (on) Charge Injection (pC) 3000 Leakage (nA) 2500 2000 1500 NO/NC (on) 1000 500 0 −500 −60 70 60 50 40 30 20 10 0 −10 −20 −30 −20 0 20 40 60 80 100 Temperature (°C) Figure 5. Leakage Current vs Temperature (V+ = 5 V) 12 0 20 40 60 80 100 V+ = 5 V V+ = 3 V 0 −40 −20 Temperature (°C) Figure 4. Leakage Current vs Temperature (V+ = 3.3 V) Figure 3. ron vs VCOM (V+ = 5 V) 3500 −40 Submit Documentation Feedback 1 2 3 4 5 6 Bias Voltage (V) Figure 6. Charge Injection (QC) vs VCOM Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 TYPICAL PERFORMANCE (continued) 35 10 tON 30 9 8 tON/tOFF (ns) tON/tOFF (ns) 25 20 15 10 tOFF tOFF 7 6 tON 5 4 3 2 5 1 0 0 1 2 3 4 5 0 6 −40°C 25°C TA (5C) V+ (V) Figure 7. tON and tOFF vs Supply Voltage 85°C Figure 8. tON and tOFF vs Temperature (5-V Supply) 2.5 0 VIN rising −2 2.0 Gain (dB) VIN (V) −4 VIN falling 1.5 1.0 −6 −8 −10 0.5 −12 0.0 0 1 2 3 4 5 −14 0.1 6 1 V+ (V) Figure 9. Logic-Level Threshold vs V+ 0.010 −10 0.009 −20 1000 V+ = 3.3 V 0.008 −30 THD (%) Attenuation (dB) 100 Figure 10. Bandwidth (V+ = 5 V) 0 −40 −50 −60 0.007 0.006 0.005 −70 0.004 −80 0.003 −90 0.1 10 Frequency (MHz) 1 10 Frequency (MHz) 100 1000 V+ = 5 V 0.002 0.001 0 10 Figure 11. OFF Isolation vs Frequency 100 1000 Frequency (Hz) 10000 100000 Figure 12. Total Harmonic Distortion vs Frequency Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 13 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com TYPICAL PERFORMANCE (continued) 250 200 I+ (nA) 150 100 50 0 -50 -40 °C 25°C 85°C TA (°C) Figure 13. Power-Supply Current vs Temperature (V+ = 5 V) PIN DESCRIPTION 14 PIN NO. NAME 1 IN1 Digital control to connect COM to NO or NC 2 NO1 Normally open 3 GND Digital ground 4 NO2 Normally open 5 IN2 Digital control to connect COM to NO or NC 6 COM2 7 NC2 8 V+ 9 NC1 10 COM1 DESCRIPTION Common Normally closed Power supply Normally closed Power supply Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 PARAMETER DESCRIPTION SYMBOL VCOM DESCRIPTION Voltage at COM VNC Voltage at NC VNO Voltage at NO ron Resistance between COM and NC or COM and NO ports when the channel is ON rpeak Peak on-state resistance over a specified voltage range Δron Difference of ron between channels in a specific device ron(flat) Difference between the maximum and minimum value of ron in a channel over the specified range of conditions INC(OFF) Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the OFF state under worst-case input and output conditions INC(PWROFF) INO(OFF) INO(PWROFF) Leakage current measured at the NC port during the power-down condition, V+ = 0 Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the OFF state under worst-case input and output conditions Leakage current measured at the NO port during the power-down condition, V+ = 0 INC(ON) Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the ON state and the output (COM) open INO(ON) Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the ON state and the output (COM) open ICOM(ON) ICOM(PWROFF) Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the ON state and the output (NC or NO) open Leakage current measured at the COM port during the power-down condition, V+ = 0 VIH Minimum input voltage for logic high for the control input (IN) VIL Maximum input voltage for logic low for the control input (IN) VI Voltage at the control input (IN) IIH, IIL Leakage current measured at the control input (IN) tON Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning ON. tOFF Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the propagation delay between the digital control (IN) signal and analog output (COM, NC, or NO) signal when the switch is turning OFF. tBBM Break-before-make time. This parameter is measured under the specified range of conditions and by the propagation delay between the output of two adjacent analog channels (NC and NO) when the control signal changes state. QC Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NO or COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of the control input. Charge injection, QC = CL × ΔVCOM. CL is the load capacitance and ΔVCOM is the change in analog output voltage. CNC(OFF) Capacitance at the NC port when the corresponding channel (NC to COM) is OFF CNO(OFF) Capacitance at the NO port when the corresponding channel (NO to COM) is OFF CNC(ON) Capacitance at the NC port when the corresponding channel (NC to COM) is ON CNO(ON) Capacitance at the NO port when the corresponding channel (NO to COM) is ON CCOM(ON) CI Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is ON Capacitance of control input (IN) OISO OFF isolation of the switch is a measurement of OFF-state switch impedance. This is measured in dB in a specific frequency, with the corresponding channel (NC to COM or NO to COM) in the OFF state. XTALK Crosstalk is a measurement of unwanted signal coupling from an ON channel to an OFF channel (NC to NO or NO to NC). This is measured in a specific frequency and in dB. BW Bandwidth of the switch. This is the frequency in which the gain of an ON channel is –3 dB below the DC gain. THD Total harmonic distortion is defined as the ratio of the root mean square (RMS) value of the second, third, and higher harmonics to the magnitude of fundamental harmonic. I+ Static power-supply current with the control (IN) pin at V+ or GND Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 15 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM VNO NO Channel ON r on + IN VI ICOM VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 14. ON-State Resistance (ron) V+ VNC NC COM + VCOM + VNO NO IN VI OFF-State Leakage Current Channel OFF VI = VIH or VIL + GND Figure 15. OFF-State Leakage Current (INC(OFF), INC(PWROFF), INO(OFF), INO(PWROFF), ICOM(OFF), ICOM(PWROFF)) V+ VNC NC COM + VNO NO VI VCOM ON-State Leakage Current Channel ON VI = VIH or VIL IN + GND Figure 16. ON-State Leakage Current (ICOM(ON), INC(ON), INO(ON)) 16 Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = V+ or GND VCOM COM VBIAS VI Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. IN GND Figure 17. Capacitance (CI, CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON)) V+ VCOM NC or NO VNC or VNO NC or NO CL(2) TEST RL CL VCOM tON 50 Ω 35 pF V+ tOFF 50 Ω 35 pF V+ COM RL IN VI Logic Input(1) CL(2) GND RL V+ Logic Input (VI) 50% 50% 0 tON Switch Output (VNC or VNO) (1) (2) tOFF 90% 90% All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 18. Turn-On (tON) and Turn-Off Time (tOFF) Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 17 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com V+ NC or NO V+ Logic Input (VI) VNC or VNO VCOM 50% 0 COM NC or NO CL(2) VI IN (2) 90% 90% tBBM Logic Input(1) (1) Switch Output (VCOM) RL VNC or VNO = V+ RL = 50 Ω CL = 35 pF GND All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 19. Break-Before-Make Time (tBBM) V+ Network Analyzer 50 W VNC NC Channel ON: NC to COM COM Source Signal VCOM VI = V+ or GND NO Network Analyzer Setup 50 W VI + IN Source Power = 0 dBm (632-mV P-P at 50-W load) GND DC Bias = 350 mV Figure 20. Bandwidth (BW) 18 Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 TS5A23159 www.ti.com ........................................................................................................................................................ SCDS201E – AUGUST 2005 – REVISED JULY 2009 V+ Network Analyzer Channel OFF: NC to COM 50 W VNC NC VI = V+ or GND COM Source Signal 50 W VCOM NO Network Analyzer Setup IN Source Power = 0 dBm (632-mV P-P at 50-W load) VI 50 W + GND DC Bias = 350 mV Figure 21. OFF Isolation (OISO) V+ Network Analyzer Channel ON: NC to COM 50 W VNC Channel OFF: NO to COM NC VCOM Source Signal VNO NO VI 50 W VI = V+ or GND + 50 W IN GND Network Analyzer Setup Source Power = 0 dBm (632-mV P-P at 50-W load) DC Bias = 350 mV Figure 22. Crosstalk (XTALK) Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 19 TS5A23159 SCDS201E – AUGUST 2005 – REVISED JULY 2009 ........................................................................................................................................................ www.ti.com V+ RGEN VGEN Logic Input (VI) OFF ON OFF V IL NC or NO COM + VIH VCOM ∆VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) (1) (2) RGEN = 0 CL = 1 nF QC = CL × ∆VCOM VI = VIH or VIL GND All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. CL includes probe and jig capacitance. Figure 23. Charge Injection (QC) Channel ON: COM to NO VSOURCE = V+ P-P VI = VIH or VIL RL = 600 Ω fSOURCE = 20 Hz to 20 kHz CL = 50 pF V+/2 V+ Audio Analyzer RL 10 mF Source Signal 10 mF NO COM 600 W 600 W CL(1) VI IN GND 600 W (1) CL includes probe and jig capacitance. Figure 24. Total Harmonic Distortion (THD) 20 Submit Documentation Feedback Copyright © 2005–2009, Texas Instruments Incorporated Product Folder Link(s): TS5A23159 PACKAGE OPTION ADDENDUM www.ti.com 8-Dec-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty TS5A23159DGSR ACTIVE MSOP DGS 10 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159DGSRE4 ACTIVE MSOP DGS 10 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159DGSRG4 ACTIVE MSOP DGS 10 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159DGST ACTIVE MSOP DGS 10 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159DGSTE4 ACTIVE MSOP DGS 10 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159DGSTG4 ACTIVE MSOP DGS 10 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159RSER ACTIVE UQFN RSE 10 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TS5A23159RSERG4 ACTIVE UQFN RSE 10 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 8-Dec-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A23159DGSR MSOP DGS 10 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 TS5A23159RSER UQFN RSE 10 3000 180.0 9.2 1.68 2.13 0.76 4.0 8.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 8-Dec-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A23159DGSR MSOP DGS 10 2500 358.0 335.0 35.0 TS5A23159RSER UQFN RSE 10 3000 202.0 201.0 28.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and Telecom www.ti.com/communications DSP dsp.ti.com Computers and Peripherals www.ti.com/computers Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & Defense www.ti.com/space-avionics-defense RF/IF and ZigBee® Solutions www.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated