µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 FEATURES 3-Terminal Regulators Output Current up to 500 mA No External Components Internal Thermal-Overload Protection COMMON KC (TO-220) PACKAGE (TOP VIEW) OUTPUT COMMON INPUT • • • High Power-Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation KTP (PowerFLEX/TO-252*) PACKAGE (TOP VIEW) COMMON • • • • OUTPUT COMMON INPUT * Complies with JEDEC TO-252, variation AC OUTPUT COMMON INPUT DCY (SOT-223) PACKAGE (TOP VIEW) OUTPUT COMMON COMMON KCS (TO-220) PACKAGE (TOP VIEW) COMMON INPUT DESCRIPTION/ORDERING INFORMATION This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. Each of these regulators can deliver up to 500 mA of output current. The internal current-limiting and thermal-shutdown features of these regulators essentially make them immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents and also as the power-pass element in precision regulators. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PowerFLEX, PowerPAD are trademarks of Texas Instruments. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 1976–2005, Texas Instruments Incorporated µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 ORDERING INFORMATION TA VO(NOM) (V) 5 0°C to 125°C 6 8 µA78M33CKTPR Tube of 80 µA78M33CDCY Reel of 2500 µA78M33CDCYR TO-220 – KC Tube of 50 µA78M33CKC UA78M33C PowerFLEX/TO-252 (2) – KTP Reel of 3000 µA78M05CKTPR UA78M05C Tube of 80 µA78M05CDCY Reel of 2500 µA78M05CDCYR TO-220 – KC Tube of 50 µA78M05CKC TO-220, short shoulder – KCS Tube of 20 µA78M05CKCS PowerFLEX/TO-252 (2) – KTP Reel of 3000 µA78M06CKTPR UA78M06C PowerFLEX/TO-252 (2) Reel of 3000 µA78M08CKTPR UA78M08C Tube of 80 µA78M08CDCY Reel of 2500 µA78M08CDCYR (1) (2) 2 SOT-223 – DCY SOT-223 – DCY – KTP SOT-223 – DCY UA78M33C C3 C5 UA78M05C C8 TO-220 – KC Tube of 50 µA78M08CKC UA78M08C 9 PowerFLEX/TO-252 (2) – KTP Reel of 3000 µA78M09CKTPR UA78M09C 10 PowerFLEX/TO-252 (2) – KTP Reel of 3000 µA78M10CKTPR UA78M10C PowerFLEX/TO-252 (2) 12 –40°C to 125°C TOP-SIDE MARKING Reel of 3000 PowerFLEX™/TO-252 (2) – KTP 3.3 ORDERABLE PART NUMBER PACKAGE (1) 5 Reel of 3000 µA78M12CKTPR UA78M12C TO-220 – KC Tube of 50 µA78M12CKC UA78M12C PowerFLEX/TO-252 (2) – KTP Reel of 3000 µA78M05IKTPR UA78M05I Tube of 80 µA78M05IDCY Reel of 2500 µA78M05IDCYR TO-220 – KC Tube of 50 µA78M05IKC TO-220, short shoulder – KCS Tube of 20 µA78M05IKCS – KTP SOT-223 – DCY J5 UA78M05I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Complies with JEDEC TO-252, variation AC µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 SCHEMATIC INPUT 140 kΩ 96 Ω 0.6 Ω OUTPUT 0 to 20 kΩ 5.4 kΩ COMMON Resistor values shown are nominal. 3 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 Absolute Maximum Ratings (1) over virtual junction temperature range (unless otherwise noted) MIN VI Input voltage TJ Operating virtual junction temperature Tstg Storage temperature range (1) MAX –65 UNIT 35 V 150 °C 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. Package Thermal Data (1) PACKAGE BOARD θJP (2) θJC θJA PowerFLEX/TO-252 – KTP High K, JESD 51-5 1.4°C/W 19°C/W 28°C/W SOT-223 – DCY High K, JESD 51-7 30.6°C/W 53°C/W TO-220 – KC/KCS High K, JESD 51-5 17°C/W 19°C/W (1) (2) 3°C/W Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. For packages with exposed thermal pads, such as QFN, PowerPAD™, or PowerFLEX, θJP is defined as the thermal resistance between the die junction and the bottom of the exposed pad. Recommended Operating Conditions VI IO TJ 4 Input voltage MIN MAX µA78M33 5.3 25 µA78M05 7 25 µA78M06 8 25 µA78M08 10.5 25 µA78M09 11.5 26 µA78M10 12.5 28 µA78M12 14.5 30 µA78M15 17.5 Output current Operating virtual junction temperature µA78MxxI V 30 500 µA78MxxC UNIT 0 125 –40 125 mA °C µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 Electrical Characteristics at specified virtual junction temperature, VI = 8 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS (1) PARAMETER µA78M33C MIN TYP MAX 3.2 3.3 3.4 3.1 3.3 3.5 VI = 5.3 V to 25 V 9 100 VI = 8 V to 25 V 3 50 Output voltage (2) IO = 5 mA to 350 mA, VI = 8 V to 20 V Input voltage regulation IO = 200 mA Ripple rejection VI = 8 V to 18 V, f = 120 Hz IO = 100 mA, TJ = 0°C to 125°C 62 IO = 300 mA 62 Output voltage regulation VI = 8 V, IO = 5 mA to 500 mA 20 Temperature coefficient of output voltage IO = 5 mA, TJ = 0°C to 125°C –1 Output noise voltage f = 10 Hz to 100 kHz TJ = 0°C to 125°C Short-circuit output current (2) dB 100 mV mV/°C µV 200 4.5 V 6 IO = 200 mA, VI = 8 V to 25 V, TJ = 0°C to 125°C 0.8 IO = 5 mA to 350 mA, 0.5 TJ = 0°C to 125°C VI = 35 V Peak output current (1) mV 2 Bias current Bias current change V 80 40 Dropout voltage UNIT mA mA 300 mA 700 mA All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. This specification applies only for dc power dissipation permitted by absolute maximum ratings Electrical Characteristics at specified virtual junction temperature, VI = 10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS (1) PARAMETER Output voltage IO = 5 mA to 350 mA, VI = 7 V to 20 V Input voltage regulation IO = 200 mA Ripple rejection VI = 8 V to 18 V, f = 120 Hz Output voltage regulation TJ = 0°C to 125°C 5.2 3 100 VI = 8 V to 25 V 1 50 IO = 100 mA, TJ = 0°C to 125°C 62 IO = 300 mA 62 mV dB 100 50 f = 10 Hz to 100 kHz V 80 10 TJ = 0°C to 125°C UNIT 5.25 VI = 7 V to 25 V –1 40 Dropout voltage mV mV/°C µV 200 2 Bias current (1) 5 20 Output noise voltage Peak output current 4.8 4.75 MAX IO = 5 mA to 200 mA IO = 5 mA, Short-circuit output current TYP IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change µA78M05C MIN 4.5 V 6 IO = 200 mA, VI = 8 V to 25 V, TJ = 0°C to 125°C 0.8 IO = 5 mA to 350 mA, 0.5 VI = 35 V TJ = 0°C to 125°C mA mA 300 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 5 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 Electrical Characteristics at specified virtual junction temperature, VI = 10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage IO = 5 mA to 350 mA, VI = 7 V to 20 V Input voltage regulation IO = 200 mA Ripple rejection VI = 8 V to 18 V, f = 120 Hz Output voltage regulation µA78M05I TEST CONDITIONS (1) PARAMETER TJ = –40°C to 125°C MIN TYP MAX 4.8 5 5.2 4.75 3 100 VI = 8 V to 25 V 1 50 62 IO = 300 mA 62 100 IO = 5 mA to 200 mA 10 50 Output noise voltage f = 10 Hz to 100 kHz TJ = –40°C to 125°C 200 µV 6 mA 2 V 4.5 IO = 200 mA, VI = 8 V to 25 V, TJ = –40°C to 125°C 0.8 IO = 5 mA to 350 mA, 0.5 TJ = –40°C to 125°C VI = 35 V Peak output current (1) mV/°C 40 Bias current Short-circuit output current mV –1 Dropout voltage Bias current change dB 20 IO = 5 mA, mV 80 IO = 5 mA to 500 mA Temperature coefficient of output voltage V 5.25 VI = 7 V to 25 V IO = 100 mA, TJ = –40°C to 125°C UNIT mA 300 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. Electrical Characteristics at specified virtual junction temperature, VI = 11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage IO = 5 mA to 350 mA, Input voltage regulation IO = 200 mA Ripple rejection VI = 8 V to 18 V, Output voltage regulation µA78M06C TEST CONDITIONS (1) PARAMETER VI = 8 V to 21 V MIN 5.75 TJ = 0°C to 125°C 5 100 VI = 9 V to 25 V 1.5 50 IO = 100 mA, TJ = 0°C to 125°C 59 IO = 300 mA 59 10 60 f = 10 Hz to 100 kHz Dropout voltage (1) 6 mV –1 mV/°C 45 µV 2 Bias current Peak output current dB IO = 5 mA to 200 mA Output noise voltage mV 80 120 TJ = 0°C to 125°C V 6.3 VI = 8 V to 25 V f = 120 Hz UNIT 6.25 20 IO = 5 mA, Short-circuit output current 6 5.7 IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change TYP MAX 4.5 VI = 9 V to 25 V, IO = 200 mA, IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = 35 V TJ = 0°C to 125°C V 6 0.8 0.5 mA mA 270 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 Electrical Characteristics at specified virtual junction temperature, VI = 14 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 10.5 V to 23 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 11 V to 21.5 V, f = 120 Hz Output voltage regulation µA78M08C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA MIN 7.7 TJ = 0°C to 125°C 7.6 6 100 VI = 11 V to 25 V 2 50 TJ = 0°C to 125°C IO = 300 mA 56 10 80 TJ = 0°C to 125°C Dropout voltage mV –1 mV/°C 52 µV 2 Bias current 4.6 VI = 10.5 V to 25 V, IO = 200 mA, IO = 5 mA to 350 mA, TJ = 0°C to 125°C TJ = 0°C to 125°C V 6 mA 0.8 mA 0.5 VI = 35 V Peak output current (1) dB 80 IO = 5 mA to 200 mA f = 10 Hz to 100 kHz mV 56 160 Output noise voltage V 8.4 VI = 10.5 V to 25 V IO = 100 mA, UNIT 8.3 25 IO = 5 mA, Short-circuit output current 8 IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change TYP MAX 250 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. Electrical Characteristics at specified virtual junction temperature, VI = 16 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 11.5 V to 24 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 13 V to 23 V, f = 120 Hz Output voltage regulation µA78M09C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA MIN 8.6 TJ = 0°C to 125°C VI = 11.5 V to 26 V 6 100 VI = 12 V to 26 V 2 50 IO = 100 mA, TJ = 0°C to 125°C IO = 300 mA 10 90 Dropout voltage mV –1 mV/°C 58 µV 2 Bias current (1) dB 80 IO = 5 mA to 200 mA f = 10 Hz to 100 kHz mV 56 56 TJ = 0°C to 125°C V 9.5 180 Output noise voltage Peak output current 8.5 UNIT 9.4 25 IO = 5 mA, Short-circuit output current 9 IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change TYP MAX 4.6 VI = 11.5 V to 26 V, IO = 200 mA, IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = 35 V TJ = 0°C to 125°C V 6 0.8 0.5 mA mA 250 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 7 µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 Electrical Characteristics at specified virtual junction temperature, VI = 17 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 12.5 V to 25 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 15 V to 25 V, f = 120 Hz Output voltage regulation µA78M10C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA MIN 9.6 TJ = 0°C to 125°C 9.5 7 100 VI = 14 V to 28 V 2 50 TJ = 0°C to 125°C IO = 300 mA 55 10 100 TJ = 0°C to 125°C Dropout voltage mV –1 mV/°C 64 µV 2 Bias current V 4.7 VI = 12.5 V to 28 V, IO = 200 mA, IO = 5 mA to 350 mA, TJ = 0°C to 125°C 6 TJ = 0°C to 125°C mA 0.8 mA 0.5 VI = 35 V Peak output current (1) dB 80 IO = 5 mA to 200 mA f = 10 Hz to 100 kHz mV 59 200 Output noise voltage V 10.5 VI = 12.5 V to 28 V IO = 100 mA, UNIT 10.4 25 IO = 5 mA, Short-circuit output current 10 IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change TYP MAX 245 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. Electrical Characteristics at specified virtual junction temperature, VI = 19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 14.5 V to 27 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 15 V to 25 V, f = 120 Hz Output voltage regulation µA78M12C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA MIN 11.5 TJ = 0°C to 125°C VI = 14.5 V to 30 V 8 100 VI = 16 V to 30 V 2 50 IO = 100 mA, TJ = 0°C to 125°C IO = 300 mA 10 120 Dropout voltage 8 mV –1 mV/°C 75 µV 2 Bias current (1) dB 80 IO = 5 mA to 200 mA f = 10 Hz to 100 kHz mV 55 55 TJ = 0°C to 125°C V 12.6 240 Output noise voltage Peak output current 11.4 UNIT 12.5 25 IO = 5 mA, Short-circuit output current 12 IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change TYP MAX 4.8 VI = 14.5 V to 30 V, IO = 200 mA, IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = 35 V TJ = 0°C to 125°C V 6 0.8 0.5 mA mA 240 mA 0.7 A All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. µA78M00 SERIES POSITIVE-VOLTAGE REGULATORS www.ti.com SLVS059P – JUNE 1976 – REVISED OCTOBER 2005 The µA78M15 is obsolete and no longer supplied. Electrical Characteristics at specified virtual junction temperature, VI = 23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 17.5 V to 30 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 18.5 V to 28.5 V, f = 120 Hz Output voltage regulation µA78M15C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA TJ = 0°C to 125°C TYP 14.4 15 14.25 VI = 17.5 V to 30 V VI = 20 V to 30 V IO = 100 mA, TJ = 0°C to 125°C IO = 300 mA 15.6 10 100 3 50 dB 70 25 300 10 150 Output noise voltage f = 10 Hz to 100 kHz Dropout voltage Bias current IO = 200 mA, IO = 5 mA to 350 mA, TJ = 0°C to 125°C mV –1 mV/°C 90 µV 2 V 4.8 VI = 17.5 V to 30 V, mV 54 54 TJ = 0°C to 125°C V 15.75 IO = 5 mA to 200 mA IO = 5 mA, UNIT MAX IO = 5 mA to 500 mA Temperature coefficient of output voltage Bias current change MIN TJ = 0°C to 125°C 6 0.8 0.5 mA mA Short-circuit output current VI = 35 V 240 mA Peak output current 0.7 A (1) All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. 9 PACKAGE OPTION ADDENDUM www.ti.com 27-Oct-2006 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty Lead/Ball Finish MSL Peak Temp (3) UA78M05CDCY ACTIVE SOT-223 DCY 4 80 TBD CU SN Level-2-235C-1 YEAR UA78M05CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR TBD CU SN Level-2-235C-1 YEAR CU SN Level-2-260C-1YEAR CU SN N / A for Pkg Type N / A for Pkg Type UA78M05CDCYR ACTIVE SOT-223 DCY 4 2500 UA78M05CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) UA78M05CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) UA78M05CKCS ACTIVE TO-220 KCS 3 50 TBD CU SN UA78M05CKTPR NRND PFM KTP 2 3000 TBD CU SNPB Level-1-220C-UNLIM UA78M05CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M05CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR UA78M05IDCY ACTIVE SOT-223 DCY 4 80 TBD CU SN Level-2-235C-1 YEAR UA78M05IDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR TBD CU SN Level-2-235C-1 YEAR CU SN Level-2-260C-1YEAR UA78M05IDCYR ACTIVE SOT-223 DCY 4 2500 UA78M05IDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) UA78M05IKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M05IKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M05IKCS ACTIVE TO-220 KCS 3 50 TBD CU SN N / A for Pkg Type UA78M05IKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TBD UA78M05IKTPR NRND PFM KTP 2 3000 CU SNPB Level-1-220C-UNLIM UA78M05IKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M05IKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TBD Call TI Call TI TBD CU SNPB Level-1-220C-UNLIM UA78M06CKC OBSOLETE TO-220 KC 3 UA78M06CKTPR NRND PFM KTP 2 3000 UA78M06CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M06CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR UA78M08CDCY ACTIVE SOT-223 DCY 4 80 TBD CU SN Level-2-235C-1 YEAR UA78M08CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78M08CDCYR ACTIVE SOT-223 DCY 4 2500 TBD CU SN Level-2-235C-1 YEAR UA78M08CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR UA78M08CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M08CKCE3 NRND TO-220 KC 3 50 Pb-Free CU SN N / A for Pkg Type Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 27-Oct-2006 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty UA78M08CKCS ACTIVE TO-220 KCS 3 50 TBD CU SN TBD Lead/Ball Finish MSL Peak Temp (3) (RoHS) N / A for Pkg Type UA78M08CKTPR NRND PFM KTP 2 3000 CU SNPB Level-1-220C-UNLIM UA78M08CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M08CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR UA78M09CKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI UA78M09CKTP OBSOLETE PFM KTP 2 TBD Call TI Call TI TBD UA78M09CKTPR NRND PFM KTP 2 3000 CU SNPB Level-1-220C-UNLIM UA78M09CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M09CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR TBD Call TI Call TI TBD CU SNPB Level-1-220C-UNLIM UA78M10CKC OBSOLETE TO-220 KC 3 UA78M10CKTPR NRND PFM KTP 2 3000 UA78M10CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M10CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR UA78M12CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M12CKCS ACTIVE TO-220 KCS 3 50 TBD CU SN N / A for Pkg Type TBD UA78M12CKTPR NRND PFM KTP 2 3000 CU SNPB Level-1-220C-UNLIM UA78M12CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M12CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR UA78M15CKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI UA78M15CKTPR OBSOLETE PFM KTP 2 TBD Call TI Call TI UA78M20CKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI UA78M20CKTPR OBSOLETE PFM KTP 2 TBD Call TI Call TI UA78M20Y OBSOLETE XCEPT Y 0 TBD Call TI Call TI UA78M24CKTPR OBSOLETE PFM KTP 2 TBD Call TI Call TI UA78M33CDCY ACTIVE SOT-223 DCY 4 80 TBD CU SN Level-2-235C-1 YEAR UA78M33CDCYG3 ACTIVE SOT-223 DCY 4 80 Green (RoHS & no Sb/Br) CU SN Level-2-260C-1YEAR TBD CU SN Level-2-235C-1 YEAR CU SN Level-2-260C-1YEAR UA78M33CDCYR ACTIVE SOT-223 DCY 4 2500 UA78M33CDCYRG3 ACTIVE SOT-223 DCY 4 2500 Green (RoHS & no Sb/Br) UA78M33CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M33CKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M33CKCS ACTIVE TO-220 KCS 3 50 TBD CU SN N / A for Pkg Type UA78M33CKCSE3 ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type UA78M33CKTPR NRND PFM KTP 2 3000 TBD CU SNPB Addendum-Page 2 Level-1-220C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 27-Oct-2006 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty UA78M33CKTPRG3 NRND PFM KTP 2 3000 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM UA78M33CKVURG3 ACTIVE PFM KVU 3 2500 Green (RoHS & no Sb/Br) CU SN Level-3-260C-168 HR Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 3 MECHANICAL DATA MPDS094A – APRIL 2001 – REVISED JUNE 2002 DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE 6,70 (0.264) 6,30 (0.248) 3,10 (0.122) 2,90 (0.114) 4 0,10 (0.004) M 3,70 (0.146) 3,30 (0.130) 7,30 (0.287) 6,70 (0.264) Gauge Plane 1 2 0,84 (0.033) 0,66 (0.026) 2,30 (0.091) 4,60 (0.181) 1,80 (0.071) MAX 3 0°–10° 0,10 (0.004) M 0,25 (0.010) 0,75 (0.030) MIN 1,70 (0.067) 1,50 (0.059) 0,35 (0.014) 0,23 (0.009) Seating Plane 0,08 (0.003) 0,10 (0.0040) 0,02 (0.0008) 4202506/B 06/2002 NOTES: A. B. C. D. All linear dimensions are in millimeters (inches). This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion. Falls within JEDEC TO-261 Variation AA. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 MECHANICAL DATA MPSF001F – JANUARY 1996 – REVISED JANUARY 2002 KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE 0.080 (2,03) 0.070 (1,78) 0.243 (6,17) 0.233 (5,91) 0.228 (5,79) 0.218 (5,54) 0.050 (1,27) 0.040 (1,02) 0.010 (0,25) NOM 0.130 (3,30) NOM 0.215 (5,46) NOM 0.247 (6,27) 0.237 (6,02) Thermal Tab (See Note C) 0.287 (7,29) 0.277 (7,03) 0.381 (9,68) 0.371 (9,42) 0.100 (2,54) 0.090 (2,29) 0.032 (0,81) MAX Seating Plane 0.090 (2,29) 0.180 (4,57) 0.004 (0,10) 0.005 (0,13) 0.001 (0,02) 0.031 (0,79) 0.025 (0,63) 0.010 (0,25) M 0.010 (0,25) NOM Gage Plane 0.047 (1,19) 0.037 (0,94) 0.010 (0,25) 2°–ā6° 4073388/M 01/02 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. The center lead is in electrical contact with the thermal tab. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). Falls within JEDEC TO-252 variation AC. PowerFLEX is a trademark of Texas Instruments. POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Mailing Address: Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2006, Texas Instruments Incorporated