ALUMINUM ELECTROLYTIC CAPACITORS AS Wide Temperature Range, Miniature Type Permissible Abnormal Voltage series AQ Improved safety feature for abnormally excessive voltage. High ripple current product. Adapted to the RoHS directive (2002/95/EC). Smaller AS Specifications Performance Characteristics – 40 ~ +105°C 200V 33 ~ 330µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is 0.04CV+100 (µA) or less. Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current 200 0.15 Rated voltage (V) tan δ tan δ (MAX.) Measurement frequency:120Hz, Temperature:20°C Rated voltage (V) Stability at Low Temperature After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Endurance Shelf Life Measurement frequency : 120Hz 200 3 6 Z– 25°C / Z+20°C Z– 40°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less After leaving capacitors under no load at 105°C for 1000 hours, they meet the specified value for endurance characteristics listed above. The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. Safety Performance Test conditions voltage (V) 200 Limited DC current Test Voltage 4A (5A : 330µF) 300VDC and 375VDC Printed with white color letter on dark brown sleeve. Marking Radial Lead Type Type numbering system (Example : 200V 220 µF) Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 d UA S 2 D 2 2 1 MHD f P ± 0.5 D+0.5MAX. f Pressure relief vent L+ 2.0MAX. 15MIN 4MIN (mm) D 10 12.5 16 18 P 5.0 5.0 7.5 7.5 f d 0.6 0.6 0.8 0.8 f Configuration Pb-free leadwire fD Pb-free PET sleeve 10 PD 12.5 ~ 18 HD In case L>25 for f12.5 (D) case sizes, lead diameter f0.8 (d) will be applied. • Please refer to page 21 about the end seal configulation. Size code Configuration Capacitance tolerance (±20%) Rated Capacitance (220µF) Rated voltage (200V) Series name Type Dimensions V Cap.(µF) 33 47 56 68 82 100 150 180 220 270 330 200 (2D) φD Code 330 470 560 680 820 101 151 181 221 271 331 φ10 10 × 20 10 × 25 φ12.5 160 195 φ16 φ18 Case size φ D × L (mm) Rated ripple 12.5 × 20 12.5 × 20 12.5 × 25 12.5 × 25 12.5 × 31.5 195 210 320 360 430 16 × 20 16 × 25 16 × 31.5 430 460 600 18 × 20 18 × 25 18 × 31.5 18 × 35.5 18 × 40 460 600 710 890 910 Rated Ripple (mArms) at 105°C 120Hz : In this case, 6 will be put at 12th digit of type numbering system. Frequency coefficient of rated ripple current Frequency Coefficient 50, 60Hz 0.80 120Hz 1.00 300Hz 1.25 1kHz 1.40 10kHz ~ 1.60 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V