ULN200XA/XD1 Seven darlington array Features ■ Seven darlingtons per package ■ Output current 500mA per driver (600mA peak) ■ Output voltage 50V ■ Integrated suppression diodes for inductive loads ■ Outputs can be paralleled for higher current ■ TTL/CMOS/PMOS/DTL Compatible inputs ■ Inputs pinned opposite outputs to simplify layout DIP-16 SO-16 (Narrow) Description The ULN2001, ULN2002, ULN2003 and ULN 2004 are high voltage, high current darlington arrays each containing seven open collector darlington pairs with common emitters. Each channel rated at 500mA and can withstand peak currents of 600mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. The versions interface to all common logic families: ULN2001 ULN2002 ULN2003 ULN2004 December 2006 These versatile devices are useful for driving a wide range of loads including solenoids, relays DC motors, LED displays filament lamps, thermal printheads and high power buffers. The ULN2001A/2002A/2003A and 2004A are supplied in 16 pin plastic DIP packages with a copper leadframe to reduce thermal resistance. They are available also in small outline package (SO-16) as ULN2001D1/2002D1/2003D1/ 2004D1. General Purpose, DTL, TTL, PMOS, CMOS 14-25V PMOS 5V TTL, CMOS 6-15V CMOS, PMOS Rev. 5 1/14 www.st.com 14 ULN200XA/XD1 Contents 1 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 Order code 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ULN200XA/XD1 1 Diagram Figure 1. Schematic diagram ULN2001 (each driver) ULN2003 (each driver) Diagram ULN2002 (each driver) ULN2004 (each driver) 3/14 Pin configuration 2 Pin configuration Figure 2. Pin connections (top view) 4/14 ULN200XA/XD1 ULN200XA/XD1 Maximum ratings 3 Maximum ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit VO Output voltage 50 V VI Input voltage (for ULN2002A/D - 2003A/D - 2004A/D) 30 V IC Continuous collector current 500 mA IB Continuous base current 25 mA TA Operating ambient temperature range - 20 to 85 °C Storage temperature range - 55 to 150 °C 150 °C TSTG TJ Table 2. Symbol RthJA Junction temperature Thermal Data Parameter Thermal resistance junction-ambient, Max. DIP-16 SO-16 Unit 70 120 ° C/W 5/14 Electrical characteristics ULN200XA/XD1 4 Electrical characteristics Table 3. Electrical characteristics (TA = 25°C unless otherwise specified). Symbol ICEX Parameter Output leakage current Collector-emitter saturation VCE(SAT) voltage (Figure 5.) II(ON) Input current (Figure 6.) Test Min. VI(ON) 50 TA = 70°C, VCE= 50V (Figure 3.) 100 TA = 70°C for ULN2002, VCE= 50V, VI = 6V (Figure 4.) 500 TA = 70°C for ULN2002, VCE= 50V, VI = 1V (Figure 4.) 500 IC = 100mA, IB = 250µA 0.9 1.1 IC = 200mA, IB= 350µA 1.1 1.3 IC = 350mA, IB= 500µA 1.3 1.6 for ULN2002, VI = 17V 0.82 1.25 for ULN2003, VI = 3.85V 0.93 1.35 for ULN2004, VI = 5V 0.35 0.5 1 1.45 Input current (Figure 7.) TA = 70°C, IC = 500µA Input voltage (Figure 8.) VCE= 2V, for ULN2002 IC = 300mA for ULN2003 IC = 200mA IC = 250mA IC = 300mA for ULN2004 IC = 125mA IC = 200mA IC = 275mA IC = 350mA hFE DC Forward current gain (Figure 5.) CI Input capacitance tPLH Turn-on delay time tPHL Max. VCE = 50V, (Figure 3.) for ULN2001, VCE = 2V, IC = 350mA Unit µA V mA VI = 12V II(OFF) Typ. 50 65 µA 13 2.4 2.7 3 V 5 6 7 8 1000 15 25 pF 0.5 VI to 0.5VO 0.25 1 µs Turn-off delay time 0.5 VI to 0.5VO 0.25 1 µs Clamp diode leakage current (Figure 9.) VR = 50V 50 IR TA = 70°C, VR = 50V 100 VF Clamp diode forward voltage (Figure 10.) 6/14 IF = 350mA µA 1.7 2 V ULN200XA/XD1 5 Test circuits Test circuits Figure 3. Figure 4. Figure 5. Figure 6. Figure 7. Figure 8. 7/14 Test circuits ULN200XA/XD1 Figure 9. Figure 10. Figure 11. Collector current vs input current Figure 12. Collector current vs saturation voltage Ic (mA) D96IN453 D96IN454 Ic (mA) Tj=25˚C 500 500 400 400 Tj=25˚C Max Max 300 300 200 200 TYPICAL TYPICAL 100 100 0 0 0 100 200 300 400 500 Ib(µA) 0.0 0.5 1.0 1.5 Vce(sat) Figure 13. Peak collector current vs duty cycle Figure 14. Peak collector current vs duty cycle Ic peak (mA) D96IN451 NUMBER OF ACTIVE OUTPUT 7 6 5 500 4 3 2 Ic peak (mA) D96IN452A Tamb=70˚C (SO16) 500 400 400 2 300 300 Tamb=70˚C (DIP16) 3 5 200 200 7 100 100 0 0 NUMBER OF ACTIVE OUTPUT 0 8/14 20 40 60 80 DC 0 20 40 60 80 100 DC ULN200XA/XD1 6 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 9/14 Package mechanical data ULN200XA/XD1 Plastic DIP-16 (0.25) MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 0.77 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 10/14 ULN200XA/XD1 Package mechanical data mm inch DIM. MIN. TYP. A a1 MAX. MIN. TYP. 1.75 0.1 0.25 a2 MAX. 0.069 0.004 0.009 1.6 0.063 b 0.35 0.46 0.014 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 c1 D(1) E 0.020 45° (typ.) 9.8 10 0.386 0.394 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F(1) 3.8 4.0 0.150 0.157 G 4.60 5.30 0.181 0.208 L 0.4 1.27 0.150 0.050 M S OUTLINE AND MECHANICAL DATA 0.62 0.024 8 ° (max.) SO16 (Narrow) (1) "D" and "F" do not include mold flash or protrusions - Mold flash or protrusions shall not exceed 0.15mm (.006inc.) 0016020 D 11/14 Order code ULN200XA/XD1 7 Order code Table 4. Order code 12/14 Part numbers Package ULN2001A DIP-16 ULN2002A DIP-16 ULN2003A DIP-16 ULN2004A DIP-16 ULN2001D1 SO-16 ULN2002D1 SO-16 ULN2003D1 SO-16 ULN2004D1 SO-16 ULN2001D1013TR SO-16 in Tape & Reel ULN2002D1013TR SO-16 in Tape & Reel ULN2003D1013TR SO-16 in Tape & Reel ULN2004D1013TR SO-16 in Tape & Reel ULN200XA/XD1 Revision history 8 Revision history Table 5. Revision history Date Revision 05-Dec-2006 5 Changes Order codes has been updated and document has been reformatted. 13/14 ULN200XA/XD1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14