LOW POWER CONSUMPTION SILICON MMIC AMPLIFIER UPC2714T UPC2715T GAIN vs. FREQUENCY FEATURES 20 • LOW POWER CONSUMPTION: 15 mW (VCC = 3.4 V, ICC = 4.5 mA) UPC2715 15 Gain, GS (dB) • HIGH POWER GAIN: 20 dB (UPC2715T) • WIDE FREQUENCY RESPONSE: 2 GHz (UPC2714T) • INTERNAL CURRENT REGULATION MINIMIZES GAIN CHANGE OVER TEMPERATURE 10 UPC2714 5 • SUPER SMALL PACKAGE • TAPE AND REEL PACKAGING OPTION AVAILABLE 0 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) DESCRIPTION The UPC2714T and UPC2715T are Silicon Monolithic integrated circuits manufactured using the NESAT III process. These devices are suitable for applications which require low power consumption and wide frequency operation. They are designed for low cost, low power consumption gain stages in cellular radios, GPS receivers, and PCN applications. NEC's stringent quality assurance and test procedures ensure the highest reliability and performance. ELECTRICAL CHARACTERISTICS (TA = 25°C, f = 0.5 GHz, VCC = 3.4 V) PART NUMBER PACKAGE OUTLINE SYMBOLS PARAMETERS AND CONDITIONS UPC2714T T06 UNITS MIN TYP UPC2715T T06 MAX MIN TYP MAX ICC Circuit Current mA 3.3 4.5 5.7 3.3 4.5 5.7 GS Small Signal Gain dB 8.5 11.5 15.5 16 19 23 fU Upper Limit Operating Frequency (The gain at fU is 3 dB down from the gain at 0.1 GHz) GHz 1.4 ∆GS Gain Flatness, f = 0.1~ 0.6 GHz PSAT Saturated Output Power NF dBm 1.8 0.9 ±1.0 dB -10 -7 -9 Noise Figure dB dB RLOUT Output Return Loss dB 5 8 5 8 ISOL Isolation dB 22 27 28 33 ∆GT Gain-Temperature Coefficient dB/°C RTH Thermal Resistance (Junction to Ambient) °C/W 10 6.5 -6 Input Return Loss RLIN 5.0 1.2 ±1.0 13 4.5 12 +0.006 6.0 17 +0.006 200 200 California Eastern Laboratories UPC2714T, UPC2715T ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS PARAMETERS UNITS RATINGS V 4.0 VCC Supply Voltage PIN Input Power dBm -5 PT Total Power Dissipation2 mW 200 TOP Operating Temperature °C -40 to +85 TSTG Storage Temperature °C -55 to +150 RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER VCC UNITS MIN TYP MAX V 3.06 3.4 Supply Voltage 3.74 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. Mounted on 50 x 50 x 1.6 mm epoxy glass PWB (TA = 85°C). TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2714T/UPC2715T CIRCUIT CURRENT vs. VOLTAGE UPC2714T/UPC2715T CIRCUIT CURRENT vs. TEMPERATURE 10 10 VCC = 3.4V 8 Circuit Current, ICC (mA) Circuit Current, ICC (mA) 9 7 6 5 4 3 8 6 4 2 1 2 0 0 1 2 3 4 -40 5 0 40 80 Temperature, TOP (°C) Supply Voltage, VCC (V) UPC2715T GAIN AND NOISE FIGURE vs. FREQUENCY UPC2714T GAIN AND NOISE FIGURE vs. FREQUENCY 25 30 VCC = 3.74 V VCC = 3.06V Gp 9 10 7 VCC = 3.74V NF 5 0 Gain, GS (dB) VCC = 3.4V Noise Figure, NF (dB) Gain, GS (dB) VCC = 3.74V VCC = 3.4 V 15 VCC = 3.06 V VCC = 3.06 V 10 5 5 VCC = 3.4V VCC = 3.06V 1 -10 0.1 0.3 Frequency, f (GHz) 1.0 2.0 VCC = 3.74 V 3 VCC = 3.4 V 4 0 0.1 0.3 1.0 Frequency, f (GHz) 2.0 Noise Figure, NF (dB) 6 20 20 UPC2714T, UPC2715T TYPICAL PERFORMANCE CURVES (TA = 25°C, VCC = 3.4 V) UPC2715T INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY UPC2714T INPUT RETURN LOSS AND OUTPUT RETURN LOSS vs. FREQUENCY 10 Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) Input Return Loss, RLIN (dB) Output Return Loss, RLOUT (dB) 0 RLout -10 RLin -20 -30 0 RLin -10 -20 RLout -30 -40 -40 0.1 0.3 1.0 2.0 0.1 0.3 Frequency, f (GHz) UPC2715T ISOLATION vs. FREQUENCY -10 0 Isolation, ISOL (dB) Isolation, ISOL (dB) 2.0 Frequency, f (GHz) UPC2714T ISOLATION vs. FREQUENCY -20 -30 -10 -20 -30 -40 -40 0.1 0.3 1.0 2.0 0.1 0.3 Frequency, f (GHz) 1.0 2.0 Frequency, f (GHz) UPC2715T POWER vs. FREQUENCY UPC2714T POWER vs. FREQUENCY 5 5 X 0 X -5 -10 PSAT Power (dBm) 0 Power (dBm) 1.0 X -5 X PSAT -10 P1dB -15 P1dB -15 -20 -20 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) X: Typical SSB Third Order Intercept Point 0 0.5 1.0 1.5 2.0 Frequency, f (GHz) X: Typical SSB Third Order Intercept Point UPC2714T, UPC2715T TYPICAL PERFORMANCE CURVES (TA = 25°C) UPC2715T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE UPC2714T OUTPUT POWER vs. INPUT POWER AND TEMPERATURE 10 TA = 25˚C 0 VCC = 3.4 V f = 0.5 GHz 10 Output Power, POUT (dBm) Output Power, POUT (dBm) VCC = 3.4 V f = 0.5 GHZ 85˚ C -10 -20˚ C -20 -40˚ C -30 -40 TA = 85˚C 0 TA = 25˚C TA = 40˚C -10 TA = 40˚C TA = 85˚C -20 -30 -50 -40 -30 -20 -50 -10 -40 Input Power, PIN (dBm) -30 -20 -10 0 Input Power, PIN (dBm) UPC2715T OUTPUT POWER vs. INPUT POWER AND VOLTAGE UPC2714T OUTPUT POWER vs. INPUT POWER AND VOLTAGE 10 f = 0.5 GHZ Output Power, POUT (dBm) Output Power, POUT (dBm) f = 0.5 GHZ 0 3.74 V -10 VCC = 3.4 V -20 3.06 V 10 3.74 V VCC = 3.4 V 0 -10 3.06 V -20 -30 -30 -40 -50 -40 -30 -20 -50 -10 -40 -30 -20 -10 0 Input Power, PIN (dBm) Input Power, PIN (dBm) TEST CIRCUIT NOISE FIGURE vs. FREQUENCY Noise Figure, NF (dB) 7 VCC 6 1000 pF UPC2714T 5 C3 UPC2715T 6 50 Ω 4 1 IN 1000 pF 3 0 0.5 1.0 Frequency, f (GHz) 1.5 2.0 C2 C1 4 2, 3, 5 50 Ω OUT 1000 pF UPC2714T, UPC2715T TYPICAL SCATTERING PARAMETERS (TA = 25°C) UPC2714T VCC = 3.4 V, ICC = 4.5 mA FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 2.10 2.20 2.30 2.40 2.50 S11 MAG 0.123 0.133 0.139 0.151 0.165 0.176 0.187 0.197 0.205 0.215 0.219 0.225 0.228 0.231 0.231 0.232 0.231 0.229 0.226 0.223 0.216 0.212 0.208 0.204 0.201 S21 ANG -169.9 167.3 150.5 135.1 120.6 105.6 91.5 77.8 64.6 51.9 39.2 28.3 17.3 6.6 -2.8 -12.7 -21.3 -29.4 -38.0 -44.8 -51.3 -57.8 -63.4 -68.2 -72.9 MAG 3.6 3.7 3.7 3.8 3.8 3.7 3.7 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.9 2.7 2.6 2.5 2.4 2.2 2.1 2.0 1.9 1.8 S12 ANG -6.4 -19.2 -30.6 -41.8 -53.2 -64.7 -76.3 -87.9 -99.5 -111.1 -122.5 -133.8 -145.0 -156.1 -166.8 -177.4 172.2 162.0 151.9 142.3 132.3 122.8 113.7 104.6 95.6 MAG 0.069 0.061 0.056 0.048 0.040 0.035 0.031 0.025 0.024 0.022 0.023 0.024 0.025 0.026 0.028 0.029 0.030 0.032 0.033 0.035 0.036 0.037 0.039 0.040 0.041 K1 S22 ANG -12.0 -24.5 -32.7 -42.9 -48.8 -53.4 -52.7 -51.7 -47.1 -43.5 -38.2 -32.0 -31.8 -31.7 -31.4 -34.1 -36.7 -37.1 -40.2 -41.0 -47.1 -49.4 -52.7 -58.2 -58.7 MAG 0.190 0.266 0.326 0.366 0.394 0.414 0.429 0.436 0.439 0.439 0.432 0.422 0.412 0.400 0.387 0.374 0.359 0.348 0.335 0.322 0.311 0.298 0.287 0.276 0.270 ANG 13.3 8.7 2.9 -4.0 -11.1 -19.4 -27.3 -35.3 -43.2 -50.6 -58.0 -64.8 -71.4 -77.8 -83.4 -88.9 -94.1 -98.5 -103.2 -107.4 -111.5 -115.3 -118.9 -122.2 -125.7 2.04 2.17 2.25 2.49 2.86 3.19 3.55 4.36 4.60 5.08 5.00 4.96 4.97 5.01 4.90 4.97 5.11 5.08 5.20 5.21 5.39 5.57 5.61 5.81 5.97 S21 (dB) 11.2 11.3 11.4 11.5 11.5 11.4 11.4 11.3 11.1 11.0 10.8 10.5 10.2 9.8 9.5 9.1 8.7 8.3 7.9 7.5 7.0 6.6 6.2 5.7 5.3 UPC2715T VCC = 3.4 V, ICC = 4.5 mA FREQUENCY (GHz) 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 1.60 1.70 1.80 1.90 2.00 S11 MAG 0.052 0.087 0.121 0.141 0.159 0.175 0.181 0.184 0.187 0.187 0.186 0.182 0.178 0.173 0.167 0.163 0.157 0.152 0.148 0.142 Note: 1. K factor calculations: S21 ANG 33.7 21.3 9.5 -2.1 -12.4 -27.8 -40.7 -52.3 -66.1 -78.4 -89.3 -101.5 -113.8 -125.4 -137.1 -148.4 -160.0 -171.6 176.8 164.7 MAG 7.7 7.8 7.9 7.9 7.9 7.7 7.4 7.2 6.9 6.6 6.3 6.1 5.7 5.3 4.9 4.6 4.2 3.9 3.7 3.4 S12 ANG -8.4 -25.7 -40.9 -55.9 -69.5 -84.9 -98.4 -112.0 -125.6 -138.9 -150.8 -162.7 -174.5 174.3 163.7 153.2 143.1 133.2 123.5 114.5 MAG 0.031 0.028 0.025 0.022 0.020 0.019 0.019 0.019 0.020 0.021 0.022 0.023 0.024 0.025 0.026 0.027 0.028 0.029 0.030 0.031 S22 ANG -7.8 -12.6 -17.8 -20.3 -21.2 -19.7 -15.7 -13.3 -12.3 -11.2 -11.6 -12.1 -14.5 -16.3 -18.3 -20.6 -22.2 -23.9 -25.6 -27.1 2 2 2 K = 1 + | ∆ | - |S11| - |S22| , ∆ = S11 S22 - S21 S12 2 |S12 S21| MAG 0.254 0.279 0.311 0.351 0.383 0.409 0.426 0.432 0.432 0.426 0.412 0.394 0.377 0.359 0.343 0.328 0.315 0.306 0.296 0.286 K1 S21 (dB) 2.07 2.20 2.35 2.54 2.68 2.79 2.82 2.87 2.83 2.85 2.87 2.93 3.06 3.22 3.35 ` 3.53 3.72 3.90 4.07 4.28 17.7 17.8 17.9 18.0 18.0 17.7 17.4 17.2 16.8 16.4 16.0 15.6 15.0 14.4 13.9 13.2 12.5 11.9 11.3 10.6 ANG 8.1 3.6 -1.0 -6.4 -13.0 -21.3 -30.2 -39.1 -48.1 -56.3 -64.2 -71.2 -77.5 -83.4 -88.3 -93.1 -97.2 -100.8 -104.7 -108.9 UPC2714T, UPC2715T EQUIVALENT CIRCUIT LEAD CONNECTIONS VCC (Top View) (Bottom View) 3 2 IN C1K OUT 1 * GND 1. 2. 3. 4. 5. 6. 4 4 3 5 5 2 6 6 1 INPUT GND GND OUTPUT GND VCC Note: Package Markings: C1K - UPC2714T C1L - UPC2715T *Used in UPC2714T only OUTLINE DIMENSIONS (Units in mm) RECOMMENDED P.C.B. LAYOUT (Units in mm) 3.10 UPC2714T/UPC2715T PACKAGE OUTLINE T06 +0.2 2.8 -0.3 3 4 +0.2 1.5 -0.1 2 3 0.95 4 1.9±0.2 2 0.95 5 1 6 2.9±0.2 5 1 +0.2 1.1 -0.1 -0.05 0.3 +0.10 0.95 6 0.5 MIN 1.0 MIN 1.0 MIN 0.13±0.1 0.8 0 to 0.1 Note: All dimensions are typical unless otherwise noted. ORDERING INFORMATION PART NUMBER QTY UPC2714T-E3 3K/Reel UPC2715T-E3 3K/Reel Embossed Tape, 8 mm wide. Pins 1, 2, 3 are in tape pull-out direction. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM PRINTED IN USA ON RECYCLED PAPER -11/97 DATA SUBJECT TO CHANGE WITHOUT NOTICE