ISAHAYA VLA106

HYBRID IC
VLA106-15154
ISOLATED TYPE DC-DC CONVERTER
DESCRIPTION
The VLA106-15154 is a DC-DC converter. Its output power is
4.5W and the input is isolated from the output. The over-
OUTLINE DRAWING
Dimensions: mm
current protection circuit is built-in and it is the best for
on-board power supplies, such as industrial equipment and
46 MAX
control equipment.
27MAX
15154
XXXX
FEATURES
•Input voltage range: 9 to 18V DC
•Output: +15V, 300mA (output power : 4.5W)
4.5 +/-1.5
•Thin-profile and lightweight design
•Isolation between input and output : 2500Vrms, 1min
0.5 +0.1/-0.05
•Built-in over-current protection circuit
4.5MAX
APPLICATIONS
2.54x15=38.1
1
On-board power supplies for control equipment.
0.25 +0.2/-0.05
5.5 MAX
4.5MAX
13.5 MAX
18 MAX
16
BLOCK DIAGRAM
+V IN
8
3 +Vo
FILTER
FILTER
9
CONSTANT
VOLTAGE
CIRCUIT
DRIVE
CIRCUIT
-V IN
1 -Vo
OVER-CURRENT
PROTECTION
10
11
OPTO COUPLER
15 16
NC NC
2 NC
HYBRID IC
VLA106-15154
ISOLATED TYPE DC-DC CONVERTER
MAXIMUM RATINGS (unless otherwise noted, Ta=25°C)
Symbol
Parameter
Conditions
Ratings
Unit
VIN
Input voltage
Between pins 8,9 and 10,11
18
V
IO
Output current
Between pins 3 and 1
300
mA
Topr
Operating temperature
No condensation
-10 ~ +70
°C
Tstg
Storage temperature
No condensation
-20 ~ +85
°C
Viso
Input-output isolation voltage
AC , 1min
2500
Vrms
ELECTRICAL CHARACTERISTICS (unless otherwise noted, VIN=15V, Ta=25°C)
Symbol
Parameter
Test conditions
VIN
Input voltage
VO
Limits
Unit
MIN.
TYP.
MAX.
Recommended range
9
15
18
V
Output voltage
IO= 0 ~ 300mA
14.25
15.00
15.75
V
Reg-I
Input regulation
IO=300mA, VIN=9 ~ 18V
—
—
75
mV
Reg-L
Load regulation
IO= 0 ~ 300mA
—
—
120
mV
VP-P
Ripple voltage
IO=300mA
—
—
120
mV
η
Efficiency
IO=300mA
—
75
—
%
TEST CIRCUIT DIAGRAM
8
+
VIN
3
9
100μF
50V
+
VLA106-15154
2
220μF
50V
10
11
1
2
Load
HYBRID IC
VLA106-15154
ISOLATED TYPE DC-DC CONVERTER
FOR SAFETY USING
Great detail and careful attention are given to the production activity of Hics, such as the development, the quality of production,
and in it’s reliability. However the reliability of Hics depends not only on their own factors but also in their condition of usage.
When handling Hics, please note the following cautions.
CAUTIONS
Packing
Carrying
The materials used in packing Hics can only withstand normal external conditions.
When exposed to outside shocks, rain and certain environmental contaminators, the packing
materials will deteriorates. Please take care in handling.
1)
2)
3)
4)
5)
Don’t stack boxes too high. Avoid placing heavy materials on boxes.
Boxes must be positioned correctly during transportation to avoid breakage.
Don't throw or drop boxes.
Keep boxes dry. Avoid rain or snow.
Minimal vibration and shock during transportation is desirable.
Storage
When storing Hics, please observe the following notices or possible deterioration of their electrical
characteristics, risk of solderability, and external damage may occur.
1) Devices must be stored where fluctuation of temperature and humidity is minimal, and must
not be exposed to direct sunlight. Store at the normal temperature of 5 to 30 degrees Celsius
with humidity at 40 to 60%.
2) Avoid locations where corrosive gasses are generated or where much dust accumulates.
3) Storage cases must be static proof.
4) Avoid putting weight on boxes.
Extended storage
When extended storage is necessary, Hics must be kept non-processed. When using Hics which
have been stored for more than one year or under severe conditions, be sure to check that the
exterior is free from flaw and other damages.
Maximum ratings
To prevent any electrical damages, use Hics within the maximum ratings.
current, voltage, etc. must not exceed these conditions.
Polarity
To protect Hics from destruction and deterioration due to wrong insertion, make sure of polarity in
inserting leads into the board holes, conforming to the external view for the terminal arrangement.
3
The temperature,
HYBRID IC
VLA106-15154
ISOLATED TYPE DC-DC CONVERTER
Marketing division, Marketing planning department
6-41 Tsukuba, Isahaya, Nagasaki, 854-0065 Japan
Keep safety first in your circuit designs!
- ISAHAYA Electronics Corporation puts the maximum effort into making semiconductor products better and more reliable,
but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal
injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (1)placement of substitutive, auxiliary circuits, (2)use of non-flammable material or
(3)prevention against any malfunction or mishap.
Notes regarding these materials
- These materials are intended as a reference to our customers in the selection of the ISAHAYA products best suited to the
customer's application; they don't convey any license under any intellectual property rights, or any other rights, belonging
to ISAHAYA Electronics Corporation or a third party.
- ISAHAYA Electronics Corporation assumes no responsibility for any damage, or infringement of any third party's rights,
originating in the use of any product data, diagrams, charts or circuit application examples contained in these materials.
- All information contained in these materials, including product data, diagrams and charts, represent information on products
at the time of publication of these materials, and are subject to change by ISAHAYA Electronics Corporation without notice
due to product improvements or other reasons. It is therefore recommended that customers contact ISAHAYA Electronics
Corporation or an authorized ISAHAYA products distributor for the latest product information before purchasing a product
listed herein.
- ISAHAYA Electronics Corporation products are not designed or manufactured for use in a device or system that is used
under circumstances in which human life is potentially at stake. Please contact ISAHAYA Electronics Corporation or an
authorized ISAHAYA products distributor when considering the use of a product contained herein for any specific purposes,
such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
- The prior written approval of ISAHAYA Electronics Corporation is necessary to reprint or reproduce in whole or in part these
materials.
- If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a
license from the Japanese government and cannot be imported into a country other than the approved destination.
Any diversion or re-export contrary to the export control laws and regulations of Japan and/or the country of destination is
prohibited.
- Please contact ISAHAYA Electronics Corporation or an authorized ISAHAYA products distributor for further details on these
materials or the products contained therein.
4
Sep. 2006