VS-8E2TL06-E, VS-8E2TL06-M, VS-8E2TL06FP-E Vishay Semiconductors Ultralow VF Ultrafast Rectifier, 8 A FRED Pt® FEATURES 2L TO-220AC • Ultrafast recovery time, extremely low VF and soft recovery • 175 °C maximum operating junction temperature • For PFC DCM operation • True 2 pin package • Low leakage current • Fully isolated package (VINS = 2500 VRMS) • Compliant to RoHS directive 2002/95/EC • Halogen-free according to IEC 61249-2-21 definition • Designed and qualified for industrial level 2L TO-220 FULL-PAK Base cathode 2 1 Cathode 3 Anode 2 Anode 1 Cathode VS-8E2TL06 DESCRIPTION State of the art, ultralow VF, soft-switching ultrafast rectifiers optimized for Discontinuous (Critical) Mode (DCM) Power Factor Correction (PFC). The minimized conduction loss, optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. The device is also intended for use as a freewheeling diode in power supplies and other power switching applications. VS-8E2TL06FP PRODUCT SUMMARY Package 2L TO-220AC, 2L TO-220 FP IF(AV) 8A VR 600 V VF at IF 1.07 V trr (typ.) 60 ns TJ max. 175 °C Diode variation Single die APPLICATIONS AC/DC SMPS 70 W to 400 W e.g. laptop and printer AC adaptors, desktop PCs, TVs and monitors, games units and DVD ac-to-dc power supplies. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Peak repetitive reverse voltage TEST CONDITIONS VALUES UNITS 600 V VRRM Average rectified forward current TC = 156 °C IF(AV) FULL-PAK 8 TC = 131 °C TJ = 25 °C A 125 Non-repetitive peak surge current IFSM Peak repetitive forward current IFM 16 TJ, TStg - 65 to 175 Operating junction and storage temperatures °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS IR = 100 μA IF = 8 A MIN. TYP. MAX. 600 - - - 1 1.07 IF = 8 A, TJ = 150 °C - 0.85 0.90 VR = VR rated - 0.04 4 TJ = 150 °C, VR = VR rated - 10 70 UNITS V μA Reverse leakage current IR Junction capacitance CT VR = 600 V - 6 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8 - nH Document Number: 93168 Revision: 19-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 VS-8E2TL06-E, VS-8E2TL06-M, VS-8E2TL06FP-E Ultralow VF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL Reverse recovery time trr TEST CONDITIONS MIN. IF = 1.0 A, dIF/dt = 100 A/μs, VR = 30 V IF = 8.0 A, dIF/dt = 100 A/μs, VR = 30 V TJ = 25 °C TJ = 125 °C Peak recovery current IRRM Reverse recovery charge Qrr TYP. MAX. - 60 100 - 150 250 - 200 - UNITS ns - 255 - - 15 - - 20 - TJ = 25 °C - 1.5 - TJ = 125 °C - 2.4 - MIN. TYP. MAX. UNITS - 65 - 175 °C TJ = 25 °C TJ = 125 °C IF = 8 A dIF/dt = 200 A/μs VR = 390 V A μC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range Thermal resistance, junction to case FULL-PAK TEST CONDITIONS TJ, TStg RthJC - 2 2.4 - 5 5.5 Thermal resistance, junction to ambient per leg RthJA Typical socket mount - - 70 Typical thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2 - g - 0.07 - oz. 6 (5) - 12 (10) kgf · cm (lbf · in) Weight Mounting torque Marking device www.vishay.com 2 Case style TO-220 Case style TO-220 FULL-PAK For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] °C/W 8E2TL06 8E2TL06FP Document Number: 93168 Revision: 19-Aug-10 VS-8E2TL06-E, VS-8E2TL06-M, VS-8E2TL06FP-E Vishay Semiconductors 100 100 TJ = 175 °C 10 TJ = 175 °C IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Ultralow VF Ultrafast Rectifier, 8 A FRED Pt® TJ = 150 °C 1 TJ = 25 °C 10 TJ = 150 °C 1 TJ = 125 °C TJ = 100 °C 0.1 TJ = 75 °C 0.01 TJ = 50 °C TJ = 25 °C 0.1 0.2 0.001 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0 1.8 VF - Forward Voltage Drop (V) 93168_01 100 200 300 400 500 600 VR - Reverse Voltage (V) 93168_02 Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 100 10 1 0 93168_03 100 200 300 400 500 600 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 0.1 0.01 0.00001 93168_04 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single pulse (thermal resistance) 0.0001 0.001 0.01 0.1 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (TO-220) Document Number: 93168 Revision: 19-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 VS-8E2TL06-E, VS-8E2TL06-M, VS-8E2TL06FP-E Ultralow VF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors ZthJC - Thermal Impedance (°C/W) 10 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 1 Single pulse (thermal resistance) 0.1 0.00001 0.0001 0.001 0.01 0.1 1 t1 - Rectangular Pulse Duration (s) 93168_05 180 170 DC 160 Square wave (D = 0.50) 80 % rated VR applied 150 180 Allowable Case Temperature (°C) Allowable Case Temperature (°C) Fig. 5 - Maximum Thermal Impedance ZthJC Characteristics (FULL-PAK) See note (1) 170 160 DC 150 140 130 110 See note (1) 100 140 0 93168_06 Square wave (D = 0.50) 80 % rated VR applied 120 2 4 6 8 10 0 12 IF(AV) - Average Forward Current (A) Fig. 6 - Maximum Allowable Case Temperature vs. Average Forward Current (TO-220) 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) 93168_07 Fig. 7 - Maximum Allowable Case Temperature vs. Average Forward Current (FULL-PAK) Average Power Loss (W) 12 10 8 RMS limit 6 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 DC 4 2 0 0 93168_08 2 4 6 8 10 12 IF(AV) - Average Forward Current (A) Fig. 8 - Forward Power Loss Characteristics Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR www.vishay.com 4 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93168 Revision: 19-Aug-10 VS-8E2TL06-E, VS-8E2TL06-M, VS-8E2TL06FP-E Ultralow VF Ultrafast Rectifier, 8 A FRED Pt® 400 Vishay Semiconductors 3.0 350 IF = 8 A, TJ = 125 °C 300 2.5 trr (ns) Qrr (nC) IF = 8 A, TJ = 125 °C 250 200 150 2.0 IF = 8 A, TJ = 25 °C IF = 8 A, TJ = 25 °C 100 1.5 50 0 100 1.0 100 1000 dIF/dt (A/μs) 93168_09 1000 dIF/dt (A/μs) 93168_10 Fig. 9 - Typical Reverse Recovery Time vs. dIF/dt Fig. 10 - Typical Stored Charge vs. dIF/dt VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 11 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 12 - Reverse Recovery Waveform and Definitions Document Number: 93168 Revision: 19-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 VS-8E2TL06-E, VS-8E2TL06-M, VS-8E2TL06FP-E Ultralow VF Ultrafast Rectifier, 8 A FRED Pt® Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 8 E 2 T L 06 FP -E 1 2 3 4 5 6 7 8 9 1 - Vishay Semiconductors product suffix 2 - Current rating (8 = 8 A) 3 - Circuit configuration: E = Single diode 4 - 2 = True 2 pin package 5 - T = TO-220 6 - L = Ultrafast recovery time 7 - Voltage code (06 = 600 V) 8 - None = TO-220 FP = FULL-PAK 9 - Environmental digit: -E = RoHS compliant and terminations lead (Pb)-free -M = Halogen-free, RoHS compliant and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N VS-8E2TL06-E QUANTITY PER TUBE MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 50 1000 Antistatic plastic tubes VS-8E2TL06-M 50 1000 Antistatic plastic tubes VS-8E2TL06FP-E 50 1000 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information www.vishay.com 6 TO-220AC www.vishay.com/doc?95259 TO-220 FULL-PAK www.vishay.com/doc?95260 TO-220AC www.vishay.com/doc?95391 TO-220 FULL-PAK www.vishay.com/doc?95392 www.vishay.com/doc?95388 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 93168 Revision: 19-Aug-10 Outline Dimensions Vishay High Power Products True 2 Pin TO-220 DIMENSIONS in millimeters and inches 0.002" 0.05 mm A A E ØP F B Q H1 D Term. 4 0.150" REF. 45° Ø 2.0 mm REF. L1 b1 L b c 60° 1 2 J1 e SYMBOL MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.32 4.57 0.170 0.180 b 0.71 0.91 0.028 0.036 b1 1.15 1.39 0.045 0.055 c 0.36 0.53 0.014 0.021 D 14.99 15.49 0.590 0.610 E 10.04 10.41 0.395 0.410 e 5.08 BSC 0.200 BSC F 1.22 1.37 0.048 0.054 H1 5.97 6.47 0.235 0.255 J1 2.54 2.79 0.100 0.110 L 13.47 13.97 0.530 0.550 (1) 3.31 3.81 0.130 0.150 ØP 3.79 3.88 0.149 0.153 Q 2.60 2.84 0.102 0.112 L1 Notes (1) Lead dimension and finish uncontrolled in L 1 • These dimensions are within allowable dimensions of JEDEC TO-220AB rev. J outline dated 3-24-87 • Controling dimension: Inch Document Number: 95259 Revision: 21-Jan-10 For technical questions concerning discrete products, contact: [email protected] For technical questions concerning module products, contact: [email protected] www.vishay.com 1 Outline Dimensions Vishay High Power Products True 2 Pin TO-220 FULL-PAK DIMENSIONS in millimeters and inches A ØQ F E Q1 H1 D Q2 θ L1 b1 L b C e J1 SYMBOL MILLIMETERS INCHES MIN. MAX. MIN. MAX. A 4.53 4.93 0.178 0.194 b 0.71 0.91 0.028 0.036 b1 1.15 1.39 0.045 0.055 C 0.36 0.53 0.014 0.021 D 15.67 16.07 0.617 0.633 E 9.96 10.36 0.392 e 5.08 typical 0.408 0.200 typical F 2.34 2.74 0.092 0.107 H1 6.50 6.90 0.256 0.272 J1 2.56 2.96 0.101 0.117 L 12.78 13.18 0.503 0.519 0.104 L1 2.23 2.63 0.088 ØQ 2.98 3.38 0.117 0.133 Q1 3.10 3.50 0.122 0.138 Q2 14.80 15.20 0.583 0.598 θ 0° 5° 0° 5° Document Number: 95260 Revision: 22-Jan-10 For technical questions concerning discrete products, contact: [email protected] For technical questions concerning module products, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: VS-8E2TL06-E VS-8E2TL06FP-E VS-8E2TL06-M