VS-15STH06FP Vishay Semiconductors Hyperfast Rectifier, 15 A FRED Pt® FEATURES • Hyperfast recovery time, extremely low Qrr • 175 °C maximum operating junction temperature • High frequency PFC CCM operation • Low leakage current • Halogen-free according to IEC 61249-2-21 definition 1 • Designed and qualified for industrial level 3 2 DESCRIPTION VS-15STH06FP 600 V series are the state of the art tandem hyperfast recovery rectifiers: excellent switching performance and extremely low forward voltage drop trade off is overcome, boosting overall application performance. Specially designed for CCM PFC application, these devices show incomparable performance in every current intensive hard switching application. Optimized reverse recovery stored charge enables downsizing of boosting switch and cooling system, increased operating frequency make possible use of smaller reactive elements. Cost effective PFC application is then possible with high efficiency over wide input voltage range and loading factor. Plastic insulated package features easy mounting together with not insulated parts. 3L TO-220 FULL-PAK PRODUCT SUMMARY Package 3L TO-220FP IF(AV) 15 A VR 600 V VF at IF 2.4 V trr (typ.) See Recovery table TJ max. 175 °C Diode variation Doubler ABSOLUTE MAXIMUM RATINGS FOR BOTH DIODES PARAMETER SYMBOL Repetitive peak reverse voltage TEST CONDITIONS VRRM DC forward current Non-repetitive peak surge current Operating junction and storage temperatures MAX. UNITS 600 V IF TC = 73 °C 15 IFSM TC = 25 °C 115 TJ, TStg A - 55 to 175 °C ELECTRICAL SPECIFICATIONS FOR BOTH DIODES (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 15 A - 2.2 2.4 IF = 15 A, TJ = 125 °C - 1.9 2.1 IF = 15 A, TJ = 150 °C - 1.8 2 IR = 100 μA VR = VR rated - <1 10 Reverse leakage current IR TJ = 125 °C, VR = VR rated - 10 100 TJ = 150 °C, VR = VR rated - 40 200 Junction capacitance CT VR = 600 V - 17 - Document Number: 94556 Revision: 19-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] UNITS V μA pF www.vishay.com 1 VS-15STH06FP Vishay Semiconductors Hyperfast Rectifier, 15 A FRED Pt® DYNAMIC RECOVERY CHARACTERISTICS FOR BOTH DIODES (TJ = 25 °C unless otherwise specified) PARAMETER Reverse recovery time Peak recovery current SYMBOL trr IRRM TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = - 50 A/μs, VR = 30 V - - 28 TJ = 25 °C - 20 - TJ = 125 °C - 45 - TJ = 25 °C TJ = 125 °C IF = 15 A dIF/dt = - 200 A/μs VR = 390 V - 2.6 - - 5.6 6.5 UNITS ns A TJ = 25 °C - 28 - TJ = 125 °C - 140 - MIN. TYP. MAX. UNITS TJ, TStg - 55 - 175 °C Thermal resistance, junction to case RthJC - - 3.9 Thermal resistance, case to heatsink RthCS - 0.2 - - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) Reverse recovery charge Qrr nC THERMAL - MECHANICAL SPECIFICATIONS FOR BOTH DIODES PARAMETER Maximum junction and storage temperature range SYMBOL TEST CONDITIONS Mounting surface, flat, smooth and greased Weight Mounting torque Marking device www.vishay.com 2 Case style 3L TO-220 FULL-PAK °C/W 15STH06FP For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 94556 Revision: 19-Aug-10 VS-15STH06FP Hyperfast Rectifier, 15 A FRED Pt® Vishay Semiconductors 1000 Reverse Current - I R (μA) 175°C 100 150°C 10 125°C 1 100°C 0.1 25°C 0.01 0.001 0 100 200 300 400 500 600 Reverse Voltage - VR (V) 10 Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage 1000 Junction Capacitance - C T (pF) Instantaneous Forward Current - I F (A) 100 Tj = 175°C Tj = 150°C Tj = 125°C Tj = 25°C 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 100 10 4.0 1 0 Forward Voltage Drop - VFM (V) 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage Fig. 1 - Maximum Forward Voltage Drop Characteristics Thermal Impedance Z thJC (°C/W) 10 D = 0.5 1 D = 0.2 D = 0.1 D = 0.05 0.1 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) 0.01 1E-05 1E-04 1E-03 1E-02 1E-01 1E+00 1E+01 1E+02 1E+03 t1, Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94556 Revision: 19-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 VS-15STH06FP Vishay Semiconductors Hyperfast Rectifier, 15 A FRED Pt® 45 Average Power Loss ( Watts ) Allowable Case Temperature (°C) 200 150 DC 100 50 0 40 35 RMS Limit 30 D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 25 20 15 10 DC 5 0 0 2 4 6 8 10 12 14 16 0 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 6 - Forward Power Loss Characteristics Average Forward Current - IF(AV)(A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 100 1000 Vr = 390V Vr = 390V If = 15A, 125°C trr ( ns ) Qrr ( nC ) If = 15A, 125°C 100 If = 15A, 25°C If = 15A, 25°C 10 10 100 1000 di F /dt (A/μs ) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt www.vishay.com 4 100 1000 di F /dt (A/μs ) Fig. 8 - Typical Stored Charge vs. dIF/dt For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 94556 Revision: 19-Aug-10 VS-15STH06FP Hyperfast Rectifier, 15 A FRED Pt® Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 15 S T H 06 FP 1 2 3 4 5 6 7 1 - Vishay Semiconductors product suffix 2 - Current rating (15 = 15 A) 3 - S = Doubler 4 - T = TO-220 5 - H = Hyperfast recovery 6 - Voltage rating (06 = 600 V) 7 - FP = TO-220 FULL-PAK LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95264 Part marking information www.vishay.com/doc?95266 Document Number: 94556 Revision: 19-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 5 Outline Dimensions Vishay High Power Products TO-220 (3 PIN) FULL-PAK Tandem 4.69 ± 0.127 10.5 ± 0.127 6.4 ± 0.051 Ø 1.78 3.2 ± 0.051 11.16 ± 0.051 0.96 ± 0.051 Ø 3.0 ± 0.051 Ø 3.40 ± 0.051 2.7 ± 0.127 9.68 ± 0.127 3.3 ± 0.127 7.5° (2 pics) 13.6 ± 0.127 15.9 ± 0.127 0.96 ± 0.051 DIMENSIONS in millimeters 0.5 2.54 0.7 + 0.076 - 0.051 Ø 1.50 + 0.127 - 0.051 2.56 ± 0.051 R0.6 (both sides) + 5° Document Number: 95264 Revision: 21-Jul-08 For technical questions concerning discrete products, contact: [email protected] For technical questions concerning module products, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1