Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1042 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text The D-sub Connector Series Enters a New Era with Lead-free Products. ■ Determine anchor screw diameters at a glance. ■ Greatly simplified anchor combinations. ■ Shielded against EMI. ■ EMI/RFI shielded hoods available. ■ Connectors Classification D-sub Connectors Model Type XM3B-L XM2C-L XM2E-L XM2F-L Sockets with Right-angle DIP Terminals Plugs with Right-angle DIP Terminals Plugs with Straight DIP Terminals Sockets with Straight DIP Terminals Appearance Classification High-density D-sub Connectors Model Type XM4K XM4L Plugs with Right-angle DIP Terminals Sockets with Right-angle Sockets with Straight DIP DIP Terminals Terminals Appearance ■ Ratings and Characteristics Rated current 3 A (at 20˚C) Rated voltage 300 VAC Contact resistance 20 mΩ max. (at 20 mV, 100 mA max.) Insulation resistance 1,000 MΩ min. (at 500 VDC for 1 min) Withstand voltage 1,000 VAC for 1 min (leakage current: 1 mA max.) Insertion durability 100 times Operating temperature - 25 to 105˚C (with no icing at low temperature) ■ Materials Housing Socket contact Plug contact Shell Anchors Lock Pin Grounding Fixture 1042 XM4L Fiber-glass reinforced PBT resin (UL94V-0)/black Phosphor bronze Brass Steel Brass Brass Anchors XM4Z Anchor 2 or 3 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1043 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L ■ Finish Contact Mating end Terminal Shell Anchors Grounding Fixture ■ Nickel base, flash gold plated Nickel base, flash gold plated Nickel plated Nickel plated Nickel plated Tin plated Straight Right angle Ordering Information D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No. of contacts No anchors Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC 9 XM3B-0942-502L XM3B-0942-112L XM3B-0942-132L 15 XM3B-1542-502L XM3B-1542-112L XM3B-1542-132L 25 XM3B-2542-502L XM3B-2542-112L XM3B-2542-132L D-sub Plugs with Right-angle DIP Terminals Appearance Accessories No. of contacts No anchors Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC 9 XM2C-0942-502L XM2C-0942-112L XM2C-0942-132L 15 XM2C-1542-502L XM2C-1542-112L XM2C-1542-132L 25 XM2C-2542-502L XM2C-2542-112L XM2C-2542-132L D-sub Plugs with Straight DIP Terminals Appearance Accessories No. of contacts Without ground pins No anchors Anchor 2 (XM4Z-1011) M2.6 x 0.45 Anchor 2 (XM4Z-1013) #4-40 UNC 9 XM2E-0940-L XM2E-0940-502L XM2E-0940-112L XM2E-0940-132L 15 XM2E-1540-L XM2E-1540-502L XM2E-1540-112L XM2E-1540-132L 25 XM2E-2540-L XM2E-2540-502L XM2E-2540-112L XM2E-2540-132L Connectors D-sub Plugs with Straight DIP Terminals Appearance Accessories No. of contacts Without ground pins No anchors Anchor 2 (XM4Z-1011) M2.6 x 0.45 Anchor 2 (XM4Z-1013) #4-40 UNC 9 XM2E-0940-L XM2E-0940-502L XM2E-0940-112L XM2E-0940-132L 15 XM2E-1540-L XM2E-1540-502L XM2E-1540-112L XM2E-1540-132L 25 XM2E-2540-L XM2E-2540-502L XM2E-2540-112L XM2E-2540-132L Note: For other models with Anchors, contact your OMRON representative. 1043 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1044 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text High-density D-sub Plugs with Right-angle DIP Terminals Appearance Accessories No. of contacts 15 No anchors XM4K-1542-502 Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC XM4K-1542-112 XM4K-1542-132 High-density D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No. of contacts 15 No anchors XM4L-1542-502 Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC XM4L-1542-112 XM4L-1542-132 High-density D-sub Sockets with Right-angle DIP Terminals Appearance Accessories No. of contacts 15 No anchors XM4L-1541-501 Anchor 2 (XM4Z-0011) M2.6 x 0.45 Anchor 2 (XM4Z-0013) #4-40 UNC XM4L-1541-112 XM4L-1541-132 Note: For other models with Anchors, contact your OMRON representative. Anchor 2 (Screw Head Length: 5.8 mm) Type For right-angle DIP terminals For straight DIP terminals Appearance Lock screw M2.6 x 0.45 M3 x 0.5 #4-40 UNC M2.6 x 0.45 M3 x 0.5 #4-40 UNC Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z-1023 Anchor 3 (Screw Head Length: 4.8 mm) Type For right-angle DIP terminals For straight DIP terminals Appearance Lock screw M2.6 x 0.45 M3 x 0.5 #4-40 UNC M2.6 x 0.45 M3 x 0.5 #4-40 UNC Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z-1023 1044 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1045 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L ■ Dimensions D-sub Sockets with Right-angle DIP Terminals Mounting holes (t = 1.6 mm, bottom view) A B C XM3B-0942-132L XM3B-1542-132L XM3B-2542-132L Board edge 2.77 #4-40 UNC Two, 3.05±0.1 dia. 2.84 N, 1±0.1 dia. 8.1±0.1 2.84±0.1 7.9 D±0.1 2.77±0.1 B±0.1 (3.9) 1.6 5.8 5.8 18.4 8.1 2.84 3.18 No. of contacts (N) A B C D 9 30.8 24.99 16.33 6.96 15 39.1 33.32 24.66 6.96 25 53.0 47.04 38.38 6.91 D-sub Plugs with Right-angle DIP Terminals Mounting holes (t = 1.6 mm, bottom view) A B C XM2C-0942-132L XM2C-1542-132L XM2C-2542-132L Board edge #4-40 UNC Two, 3.05±0.1 dia. 2.84 N, 1±0.1 dia. 8.1±0.1 2.84±0.1 8.3 D±0.1 2.77±0.1 B±0.1 (3.9) 1.6 6 5.8 18.6 8.1 2.84 3.18 No. of contacts (N) A B C D 9 30.8 24.99 16.92 6.96 15 39.1 33.32 25.25 6.96 25 53.0 47.04 38.96 6.91 D-sub Plugs with Straight DIP Terminals A B C XM2E-0940-132L XM2E-1540-132L XM2E-2540-132L 2.77 Mounting holes (t = 1.6 mm, bottom view) #4-40 UNC Two, 3.2 +−00.1 dia. N, 1±0.1 dia. 2.84 2.84±0.1 8.3 2.77±0.1 B±0.1 12.55 5.8 0.6 dia. D 6.2 7 3.8 3.4 2.84 10.7 No. of contacts (N) A B C D E 9 30.8 24.99 16.92 19.23 6.96 15 39.1 33.32 25.25 27.56 6.96 25 53.0 47.04 38.96 41.28 6.91 1045 Connectors 6 0.35 3.25 E±0.1 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1046 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text D-sub Sockets with Straight DIP Terminals A XM2F-0940-132L XM2F-1540-132L XM2F-2540-132L B C Mounting holes (t = 1.6 mm, bottom view) #4-40 UNC 2.77 0.1 Two, 3.2 + −0 dia. N, 1±0.1 dia. 2.84 2.84±0.1 7.9 12.55 5.8 E±0.1 2.77±0.1 B±0.1 5.8 0343 0.35 6.2 7 3.8 3.6 2.84 0.6 dia. D 3.25 10.7 No. of contacts (N) A B C D E 9 30.8 24.99 16.33 19.23 6.96 15 39.1 33.32 24.66 27.56 6.96 25 53.0 47.04 38.38 41.28 6.91 High-density D-sub Plugs with Right-angle DIP Terminals 30.8 XM4K-1542-132 Mounting holes (t = 1.6 mm, bottom view) 24.99 16.92 1.145 Board edge #4-40 UNC 0.25 2.29±0.1 1.98 7.67±0.1 8.89±0.1 Two, 3.05±0.1 2.54±0.1 2.54±0.1 8.3 1.98 0.25 0.1 Fifteen, n, 1 1.0 + −0 dia. 24.99±0.1 1.6 12.55 6 5.8 2.54 8.89 22.2 2.54 2.54 3.5 (3.94) High-density D-sub Sockets with Right-angle DIP Terminals XM4L-1542-132 30.8 24.99 16.33 2.29 Mounting holes (t = 1.6 mm, bottom view) Board edge 0.25 #4-40 UNC 1.145 7.67±0.1 Two, 3.05±0.1 dia. 1.98 5 10 15 6 11 7.9 2.54±0.1 2.54±0.1 1.98 1.6 5.8 12.55 8.89 22.2 2.54 2.54 3.2 (3.94) 15 11 10 6 5 1 0.25 0.1 Fifteen, 1.0 + −0 dia. 24.99±0.1 5.8 2.54 1046 2.29±0.1 8.89±0.1 1.145 1 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1047 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L High-density D-sub Sockets with Straight DIP Terminals 30.8 24.99 16.33 XM4L-1541-132 2.29 Mounting holes (t = 1.6 mm, bottom view) 0.25 #4-40 UNC 1.145 24.99±0.1 1.98 1.145 1 6 11 +0.1 dia. Two, 3.2 −0 0.25 1.98±0.1 1.98±0.1 7.9 1.98 +0.1 dia. −0 7 12.55 5.8 5.8 0.35 7 6.2 3.8 3.25 3.4 2.8 1.98 0.6 dia. 19.23 3.96 10.7 Anchor 2 Anchor 3 XM4Z-0011 #4-40 UNC #4-40 UNC 4.75 5.8 11.8 4.75 1.4 #4-40 0.4 UNC 5.8 11.8 4.75 #4-40 UNC 0.4 5.8 11.8 4.75 0.4 M3 × 0.5 1.8 4.75 1.4 #4-40 0.4 UNC A min. 0.4 M3 × 0.5 1.3 5.8 10 4.75 5.8 11.8 4.75 5.8 2-R3.2 11.4 min. 6.4 min. 4-R2.5 Note: 1. Two Anchors are required per Connector. 2. Applicable panel thickness is less than 1.2 mm. #4-40 UNC 0.4 2.2 M2.6 × 0.45 4.8 10.0 4.75 4.8 XM4Z-0022 XM4Z-0022 1.4 #4-40 0.4 UNC 1.4 #4-40 0.4 UNC 0.4 M3 × 0.5 1.3 4.8 4.75 1.4 #4-40 0.4 UNC 4.8 11.8 10 XM4Z-0023 XM4Z-0023 #4-40 UNC #4-40 UNC #4-40 UNC 0.4 2.2 11.8 #4-40 UNC #4-40 UNC 4.75 5.8 11.8 #4-40 UNC #4-40 UNC 4.75 4.8 11.8 4.8 10.0 Dimensions: Panel Mounted (Using Anchor 3 or M3 Screws) Dimensions: Not Panel Mounted (Using Anchor 2) 5.8 M2.6 × 0.45 XM4Z-0013 XM4Z-0013 0.4 M3 × 0.5 1.8 4.75 XM4Z-0021 XM4Z-0021 2.7 XM4Z-0012 XM4Z-0012 0.4 M3 × 0.5 1.8 M2.6 × 0.45 No. of contacts (N) A 9 (See note.) 31.0 15 39.4 25 53.3 A±0.1 B min. Two, 3.2±0.1 dia. 11.4 min. Note: 1. The XM4K and XM4L use 9-contact dimensions. No. of contacts (N) A B 9 (See note.) 24.99 20.5 4-R3.4 10° 15 33.32 28.8 47.04 42.5 Note: 1. Two Anchors are required 25 per Connector. Note: 1. The XM4K and XM4L use 92. Applicable panel contact thickness is less than 1.2 dimensions. mm. 1047 Connectors XM4Z-0011 Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1048 D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L Text XM2S Hood Covers Dimensions ■ 9-contact Hoods XM2S-0911 (M2.6 x 0.45 metric screws) XM2S-0912 (M3 x 0.5 metric screws) XM2S-0913 (#4-40 UNC inch screws) Max. applicable diameter: 9 dia. 15-, 25- and 37-contact Hoods XM2S-@@11 (M2.6 x 0.45 metric screws ) XM2S-@@12 (M3 x 0.5 metric screws ) XM2S-@@13 (#4-40 UNC inch screws) Max. applicable cable diameter: F dia. Lock screw M2.6 × 0.45 M3 × 0.5 #4-40 UNC Lock screw M2.6 × 0.45 M3 × 0.5 #4-40 UNC Dimensions ■ No. of contacts A B C D E F 15 40.5 33.32 26.5 19 30 10 25 54.0 47.04 40 29 38 11 37 70.5 63.50 57 42 50 13 Ordering Information ■ Applicable Anchors Lock screw M2.6 x 0.45 metric screws M3 x 0.5 metric screws Anchor 1 XM2Z-0001 XM2Z-0002 #4-40 UNC inch screws XM2Z-0003 Anchor 2 XM2Z-0011 XM2Z-0012 XM2Z-0013 Anchor 3 XM2Z-0021 XM2Z-0022 XM2Z-0023 No. of contacts 9 XM2S-0911 XM2S-0912 XM2S-0913 15 XM2S-1511 XM2S-1512 XM2S-1513 25 XM2S-2511 XM2S-2512 XM2S-2513 37 XM2S-3711 XM2S-3712 XM2S-3713 Note: Select D-sub Connectors with Anchors or Grounding Fixtures that fit the lock screw of the Hood. ■ Accessories (Sold Separately) Anchor 5 (For Jackscrews and XM2S Hood) XM2Z-0071 (M2.6 ¥ 0.45 metric screws) XM2Z-0072 (M3 ¥ 0.5 metric screws ) XM2Z-0073 (#4-40 UNC inch screws) ■ Model 2.35 dia. 4 dia. Materials and Finish Brass/nickel plated 1048 Dimensions Screw A A XM2Z-0071 M2.6 x 0.45 XM2Z-0072 M3 x 0.5 XM2Z-0073 #4-40 UNC Omron A5 Catalogue 2007 915-1072 12/9/06 10:05 am Page 1049 Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L ■ Precautions Correct Use • Grounding (Lock Pin Grounding Fixture) • To ground, provide copper foil around the Connector Attachment hole on the board, assemble the connector and grounding fixture, and dip in solder as shown below. • Insert the connector into the PCB and then simultaneously dip-solder the connector terminals and lock pin to the board. Lock pin grounding fixture PCB (t = 1.6 mm) Approx. 1.9 • Soldering Automated Soldering Conditions (Jet Flow) 1. Soldering temperature: 250 ±5˚C 2. Continuous soldering time: Within 5˚s • Tightening Torque of Anchor and Grounding Fixture Connectors If the anchor is secured to the connector, be sure to tighten it to a torque of 0.49 N·m. CAT NO. G922-E2-01 1049