60 Series General Purpose Relays 10 A A range of general purpose relays with 2 CO (DPDT) or 3 CO (3PDT) contacts • 8 - 11 pin plug-in (FASTON) or solder versions available • AC or DC coils • Test button with mechanical flag indicator • Can be used with supply status indication, coil protection and timer modules • Rear DIN rail mount and bifurcated contact options • Sockets and accessories: see 90 and 99 series and 86.60 timer modules • Approvals (according to type): BBJ, BEAB, CSA, DEMKO, FIMKO, GOST, IMQ, NEMKO, RINA, SEV, cUL, VDE WOOD-PROCESSING MACHINES AUTOMATIC GATES ELEVATORS INDUSTRIAL APPLIANCES MEDICAL EQUIPMENT TOOLING MACHINES PLASTIC MOULDING CERAMIC INDUSTRY MACHINES ON-BOARD SHIP APPLIANCES 65 60 Series General Purpose Relays 10 A 60.63 60.13 GOST BEAB RINA GOST C PLUG-IN 8/11 PIN RELAYS 10 A TYPE 60.12 2 CO (DPDT) standard version available with test button and mechanical indicator TYPE 60.13 3 CO (3PDT) standard version available with test button and mechanical indicator TYPE 60.12 - 0200 2 CO (DPDT) 6 A bifurcated contacts TYPE 60.13 - 0200 3 CO (3PDT) 6 A bifurcated contacts - Single piece connection from contact to pin - LED and diode available - Standard contact material: AgNi - Options: see coding table page 71 - Ordering information: see page 71 C PLUG-IN RELAYS 10 A TYPE 60.62 2 CO (DPDT) TYPE 60.63 3 CO (3PDT) - Cover with flanges for Ø 3 ÷ 3.5 mm screw mount - Tin plated copper connections: FASTON 187 (4.8 x 0.8 mm) - Standard contact material: Ag Ni - Options: see coding table page 71 - Ordering information: see page 71 32.2 32.2 36.5 36.4 13.2 7 51 43 32.5 RINA 7.1 18 7.1 7.1 60.62 1 5 5 6 2 7 8 60.63 4 1 2 5 3 6 7 4 8 3 9 2 6 9 5.9 6.2 4.4 10 7 9 10 11 8 7 9 32.2 10 3.6 11 1 11 3 1 6 3 11 7.1 3.5 4 3 4 9 60.62 42 60.13 3.6 66 3.5 7 52 60.12 60.63 60 Series General Purpose Relays 10 A TECHNICAL DATA DIELECTRIC STRENGTH tested at leakage current ≤ 10 mA for 1 min at 50 Hz between coil and contacts 2,000 V between open contacts 1,000 V between adjacent contacts 2,000 V between frame and live parts 2,000 V SURGE TEST (1.2/50 µs) between coil and contacts 2,500 V ISOLATION RESISTANCE ≥ 20 · 103 MΩ ISOLATION GROUP C 250 MAXIMUM SWITCHING FREQUENCY - without load - at rated load 36,000 cycles/h 1,800 cycles/h AMBIENT TEMPERATURE (–40 ... +70)°C MECHANICAL LIFE 20 · 106 cycles version AC 50 · 106 cycles version DC PROTECTION CATEGORY OF ENCLOSURES IP 40 OPERATE AND RELEASE TIME TYPE OF DUTY DIELECTRIC TEST TYPE OF RELAY - pick-up time (0 to UN) ≤ 15 ms (including contact bounce) - drop-out time (UN to 0) ≤ 15 ms (including contact bounce) continuous 2 all-or-nothing 67 60 Series General Purpose Relays 10 A CONTACT SPECIFICATIONS RATED CURRENT 10 A MAXIMUM PEAK CURRENT 20 A NOMINAL RATE IN AC1 2,500 VA NOMINAL RATE IN AC15 500 VA RATED VOLTAGE 250 V AC MAXIMUM SWITCHING VOLTAGE 400 V AC BREAKING CAPACITY IN DC1 see diagram H 60 SINGLE PHASE HP MOTOR RATING 0.37 kW/0.6 HP CONTACT RESISTANCE: - initial ≤ 50 mΩ MINIMUM SWITCHING LOAD 500 mW (10 V/5 mA) STANDARD CONTACT MATERIAL AgNi BIFURCATED CONTACTS (OPTION 0200) RATED CURRENT 6A NOMINAL RATE IN AC1 1,500 VA NOMINAL RATE IN AC15 250 VA RATED VOLTAGE 250 V MINIMUM SWITCHING LOAD 50 mW (5 V/5 mA) F 60 H 60 7 10 20 MAX SWITCHING CURRENT (A) CYCLES A 106 105 0.5 1 1.5 2 2.5 3 Contact life vs AC1 load at 1800 cycles/h. K 60 k REDUCTION FACTOR 1 0.8 k 0.6 0.4 0.8 0.6 0.4 COS ϕ Load reduction factor vs cos ϕ. 68 4 2 1 0.6 0.4 0.2 20 60 100 140 180 VOLTAGE DC (V) LOAD (kVA) 1 C 6 0.1 0 B 10 0.2 Breaking capacity for DC1 load at 1800 cycles/h. A = load applied to 1 contact B = load applied to 2 contacts in series C = load applied to 3 contacts in series 220 60 Series General Purpose Relays 10 A COIL SPECIFICATIONS VERSIONS: AC - alternating current 50/60 Hz DC - direct current AM - current sensing DI - DC coil with a diode in parallel AC DC 2.2 VA 1.3 W OPERATING RANGE (0.8 ... 1.1) UN (0.8 ... 1.1) UN HOLDING VOLTAGE ≤ 0.8 UN ≤ 0.5 UN MUST DROP-OUT VOLTAGE ≥ 0.2 UN ≥ 0.1 UN RATED POWER NOMINAL MAGNETOMOTIVE FORCE THERMAL INSULATION CLASS OF WIRE THERMAL RESISTANCE CONDUCTED DISTURBANCE IMMUNITY 180 A 250 A F (+155°C) F (+155°C) 43°C/W 43°C/W BURST (acc. to EN 61000 - 4 - 4) level 4 (4 kV) SURGE (acc. to EN 61000 - 4 - 5) level 4 (4 kV) AC VERSION DATA R values relate to +20°C. Tolerance of R and I values: ± 10%. Rated Resistance Nominal coil Operating range voltage absorption UN Umin U max R UN 50 Hz I V V V Ω mA 6 4.8 6.6 4.6 367 12 9.6 13.2 19 183 24 19.2 26.4 80 91.7 48 38.4 52.8 320 45.8 60 48 66 500 36.7 110 88 121 1,800 20 120 96 132 1,940 18.6 230 184 253 7,250 9.6 240 192 264 8,500 9.2 DC VERSION DATA R values relate to +20°C. Tolerance of R and I values: ± 10%. CURRENT SENSING AC R values relate to +20°C. Tolerance of R and I values: ± 10%. Coil code Imin (A) IN (A) Imax (A) 4501 4.25 5.0 6.0 4451 3.8 4.5 5.4 4401 3.4 4.0 4.8 4361 3.0 3.6 4.3 4321 2.7 3.2 3.8 4281 2.4 2.8 3.4 4251 2.1 2.5 3.0 4231 1.9 2.3 2.8 4201 1.7 2.0 2.4 4181 1.5 1.8 2.2 4161 1.4 1.6 1.9 4141 1.2 1.4 1.7 4121 1.0 1.2 1.4 4101 0.85 1.0 1.2 4091 0.8 0.9 1.1 4081 0.7 0.8 1.0 4071 0.6 0.7 0.9 4061 0.5 0.6 0.7 4051 0.42 0.5 0.6 4041 0.34 0.4 0.5 4031 0.25 0.3 0.4 4021 0.17 0.2 0.25 4011 0.085 0.1 0.15 CURRENT SENSING DC R values relate to +20°C. Tolerance of R and I values: ± 10%. Coil code Imin (A) IN (A) Imax (A) R (Ω) 4502 4.25 5.0 6.0 0.020 4452 3.8 4.5 5.4 0.030 4402 3.4 4.0 4.8 0.038 4362 3.0 3.6 4.3 0.047 4322 2.7 3.2 3.8 0.059 4282 2.4 2.8 3.4 0.077 4252 2.1 2.5 3.0 0.10 4232 1.9 2.3 2.8 0.13 4202 1.7 2.0 2.4 0.15 4182 1.5 1.8 2.2 0.19 4162 1.4 1.6 1.9 0.24 4142 1.2 1.4 1.7 0.31 4122 1.0 1.2 1.4 0.42 4102 0.85 1.0 1.2 0.61 4092 0.8 0.9 1.1 0.75 4082 0.7 0.8 1.0 0.95 4072 0.6 0.7 0.9 1.24 4062 0.5 0.6 0.7 1.70 4052 0.42 0.5 0.6 2.40 4042 0.34 0.4 0.5 3.80 4032 0.25 0.3 0.4 6.70 4022 0.17 0.2 0.25 15.2 4012 0.085 0.1 0.15 61 R (Ω) 0.01 0.02 0.02 0.02 0.03 0.04 0.05 0.06 0.08 0.10 0.12 0.16 0.22 0.32 0.40 0.50 0.65 0.89 1.28 2.00 3.57 8.0 32.1 Operating range Rated voltage UN Umin V 6 12 24 48 60 110 V 4.8 9.6 19.2 38.4 48 88 U max V 6.6 13.2 26.4 52.8 66 121 Resistance R Nominal coil absorption I Ω 28 110 445 1,770 2,760 9,420 mA 214 109 53.9 27.1 21.7 11.7 69 60 Series General Purpose Relays 10 A COIL SPECIFICATIONS R 60 Umin 1 TEMPERATURE RISE “∆t” (°C) UN S 60/1 70 0.9 0.8 0.7 0.6 60 1.1 UN 50 UN 40 30 0.8 UN 20 10 0.5 0 - 40 -20 0 20 40 60 10 80 20 30 60 Temperature rise "∆t " vs applied voltage. DC coils. DC coil min pick-up voltage vs ambient temperature. Umin = pick-up voltage UN = rated voltage S 60/3 S 60/2 70 70 60 50 1.1 UN 40 UN 30 0.8 UN 20 10 TEMPERATURE RISE “∆t” (°C) TEMPERATURE RISE “∆t” (°C) 50 HEATING TIME (min) AMBIENT TEMPERATURE (°C) 60 50 1.1 UN 40 UN 30 0.8 UN 20 10 0 10 20 30 40 50 60 HEATING TIME (min) Temperature rise "∆t " vs applied voltage. AC 50 Hz coils. 70 40 0 10 20 30 40 50 60 HEATING TIME (min) Temperature rise "∆t " vs applied voltage. AC 60 Hz coils. 60 Series General Purpose Relays 10 A ORDERING INFORMATION Example: a 60 series 11-pin 3 CO (3PDT) plug-in relay with 12 V DC coil test button and mechanical indicator. 6 0 Series 1 3 No. of poles 2 = 2 CO (DPDT) 3 = 3 CO (3PDT) 0 1 2 9 Coil version 3 = DC diode in parallel to coil (positive to pin 2) 4 = Current sensing 8 = AC (50/60 Hz) 9 = DC Type 1 = 8/11 pin plug-in 6 = Faston 187 (4.8x0.8 mm) 0 0 Contact material and contact circuit 00 = Standard 02 = AgNi bifurcated contacts 60.12/13 - 6 A only 20 = AgCdO 50 = AgNi + 5µm Au Coil rated voltage 6V 006 = 012 = 12 V 024 = 24 V 048 = 48 V 060 = 60 V 110 = 110 V 125 = 125 V 230 = 230 V AC only * Available for 60.12 and 60.13 only 4 0 Light and mechanical indicators 00 = Standard 10 = Test button* 20 = Mechanical indicator* 30 = LED + mechanical indicator (AC only)* 40 = Test button + mechanical indicator* 50 = Test button + LED (for AC)* 54 = Test button + LED (for AC)*+ mechanical indicator* 60 = LED + diode, (positive to pin 2, DC only)* 70 = Test button + LED + diode (positive to pin 2)* 74 = Test button + LED + diode (positive to pin 2) + mechanical indicator* OPTIONS REAR DIN RAIL MOUNT (0008) 2 7 10 Coil version = 3 TEST BUTTON + MECHANICAL INDICATOR (0040) 2 7 10 Option = 0030 7 10 LED (AC - 0300) 2 Option = 0060 - 0070 7 10 2 Option = 0080 - 0090 71 90 Series - Sockets and Accessories for 60 Series Relays A range of sockets and accessories for the 60 series industrial relays and 28 series step relays Features include: • Solder, screw terminal, PCB, panel or DIN rail 46277 mount versions available • Can be used with supply status indication, coil protection and timer modules (see 99 and 86.60) • IP 20 finger protection • Flammability in accordance with UL 94 • Approvals (according to type): BBJ, CSA, DEMKO, FIMKO, CS - IMQ, SEV, UL, cULus, VDE 72 90 Series - Sockets and Accessories for 60 Series Relays 90.14 90.12 ® C US ® C V US C P.C.B. SOCKETS TYPE 90.14 8 pins - for type 60.12 TYPE 90.15 11 pins - for type 60.13 Options: TYPE 90.14.1 - 17.5 mm diameter holes TYPE 90.15.1 - 19 mm diameter holes FLANGE MOUNT SOLDER SOCKETS (flange mount with M3 screws) TYPE 90.12 8 pins - for type 60.12 TYPE 90.13 11 pins - for type 60.13 CHARACTERISTICS - LOAD: 10 A 250 V - ISOLATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2 kV AC - MATERIAL: phenolic resin (V0) - CONNECTIONS: Cu Zn 33 nickel plated CHARACTERISTICS - LOAD: 10 A 250 V - ISOLATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2 kV AC - MATERIAL: self-extinguishing PPEm (V1) - CONNECTIONS: Cu Zn 33 tin plated 27 4 45° 14.5 1.5 fl 28.5 38 47.5 38 45° 1.5 22 3.2 47.5 3.2 C V 28 32 32 90.12 90.13 15.5 4 14.5 20.5 17.5 90.14 90.14.1 32°43’38" 32°43’38" 1.5 1.5 6 22 19 90.15 90.15.1 73 90 Series - Sockets and Accessories for 60 Series Relays 90.23 90.21 ® C V US C C CLAMP TERMINAL SOCKETS (panel or DIN rail 46277 mount) TYPE 90.22 8 pins - for type 60.12 TYPE 90.23 11 pins - for type 60.13 Accessories: TYPE 090.33 retaining clip CLAMP TERMINAL SOCKETS (panel or DIN rail 46277 mount) TYPE 90.20 8 pins - for type 60.12 TYPE 90.21 11 pins - for type 60.13 Accessories: TYPE 090.33 retaining clip Accessories: TYPE 99.01 module facilities CHARACTERISTICS - LOAD: 10 A 250 V - ISOLATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2 kV AC - MATERIAL: self-extinguishing PPEm (V1) - CONNECTIONS: Cu Zn 33 nickel plated - PROTECTION CATEGORY: IP 20 - Non removable pozidrive slotted terminal screws. CHARACTERISTICS - LOAD: 10 A 250 V - ISOLATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2 kV AC - MATERIAL: self-extinguishing PPEm (V1) - CONNECTIONS: Cu Zn 33 nickel plated - PROTECTION CATEGORY: IP 20 - Non removable pozidrive slotted terminal screws. - Identification label. 17.5 30 7.5 64 18 7.5 3.2 64 3.2 27.5 3.2 27.5 3.2 35 67 14 30 30 38 30 38 90.20 74 22 25.5 38 90.21 NC NC NO NO 24 6 22 5 12 4 14 3 34 32 24 22 14 12 9 8 7 5 3 4 NO NC NO NC A2 7 21 8 11 1 A1 2 A2 10 COIL COM COM COIL COIL COM COM COM COIL 31 11 21 6 11 1 23 90.23 90.22 NO NC 38 A1 2 NO NC NC NO NC NO COM NC NC 34 6 32 5 12 4 14 3 32 8 24 7 21 6 22 5 12 4 11 1 a 2 a 2 14 3 b 7 31 8 COIL COM COM COIL 34 b 31 11 9 10 11 1 NO COIL COM COM COIL NO 90 Series - Sockets and Accessories for 60 Series Relays 90.73 90.26 ® C V SCREW TERMINAL SOCKETS (panel or DIN rail 46277 mount) TYPE 90.26 8 pins - for type 60.12 TYPE 90.27 11 pins - for type 60.13 Accessories: TYPE 090.33 retaining clip CLAMP TERMINAL SOCKETS (panel or DIN rail 46277 mount) TYPE 90.72 8 pins - for type 60.12 TYPE 90.73 11 pins - for type 60.13 Accessories: TYPE 090.33 retaining clip TYPE 99.73 module facilities TYPE 86.60 multifunction timer module CHARACTERISTICS - LOAD: 10 A 250 V - ISOLATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2 kV AC - MATERIAL: self-extinguishing PPEm (V1) - CONNECTIONS: Cu Zn 33 nickel plated - PROTECTION CATEGORY: IP 20 - Non removable pozidrive slotted terminal screws. CHARACTERISTICS - LOAD: 10 A 250 V - ISOLATION RESISTANCE: ≥ 103 MΩ - DIELECTRIC STRENGTH: ≥ 2 kV AC - MATERIAL: PA 66 - CONNECTIONS: Cu Zn 33 nickel plated - PROTECTION CATEGORY: IP 20 - Non removable pozidrive slotted terminal screws - Identification label - Double ground terminal (A2) 75 = = 3.25 3.25 75 8 4.2 4.2 56 51 = = US C 20 41 23 27.6 31 43 90.26 30 38 30 38 90.27 90.72 NO NC NC NO 24 22 12 14 6 5 4 3 NC 32 8 NO 24 7 com 21 6 22.5 26 90.73 NC NO NC NC NO NO 22 5 24 6 22 5 12 4 14 3 34 32 24 22 14 12 9 8 7 5 3 4 NC NO NC NO NC NC 12 4 A2 21 11 A1 7 8 1 2 COIL COM COM COIL 34 9 14 3 NO NO A2 10 31 11 11 1 A1 2 COIL COM COM COIL A2 A2 21 11 A1 7 7 8 1 2 A2 A2 31 21 11 A1 10 10 11 6 1 2 COIL COIL COM COM COIL COM COM COM COIL 75